I like how you used the tape on the sdram micro card. I've ran into issues on other things (like zumspot) where it's incredibly hard to grab and pull the sd card out without.
For anyone considering a mobile dual-bander to install in a vehicle with the head separated from the transceiver body you should be aware of the following: I was planning to save a few dollars and get the FTM-300DR which seemed to have all of the operational features I wanted and more. However, when I looked closely at how to actually install it into the vehicle I saw a different picture. If the transceiver is mounted in the back of the vehicle and the control head in the front, the FTM-300 requires three separate cables go go between the transceiver and the control head. 1. The control cable, 2. a microphone cable (there's no mic jack in the head) and 3. a speaker wire, and you will probably need to buy and mount a separate speaker up front (there's no speaker or speaker jack in the FTM-300 control head). The FTM-500, by comparison has speakers in both the control head and the transceiver body and has microphone jacks in both places as well. So all you need is a single control cable between the two parts. A much simpler installation.
Finally installed my FTM-500 after running the 400 in my Toyota for 2 years. I love the PMG function. Is there a way to scan the memory without scanning the WX frequencies?
I’m looking seriously at this radio and it’s seems to be a bit Marmite. I want it for mobile use but don’t see many U.K. based hams using it outside of their QTH. So how simple would it be to use under mobile conditions? Don’t mind programming at home APRS is not something I’ve ever used. Welcome feedback regards Mike
For a couple of months I've been trying to like this radio. But I can't pull the trigger on buying it because I think it's just too damn ugly. some ham radio operators have it sitting on the dash of their vehicle and it just looks so stupid. LOL. It's actually uglier than the icom 7100.
![งมหอย จับปลา มือเปล่า หาอยู่หากินแบบวีถีอีสานกับแก๊งเซียนหรั่ง ม่วนคัก! [ขอนแก่น] @Sianstudio](http://i.ytimg.com/vi/JEJZg6N-AbU/mqdefault.jpg)
I like how you used the tape on the sdram micro card. I've ran into issues on other things (like zumspot) where it's incredibly hard to grab and pull the sd card out without.
Yes handy tip :)
For anyone considering a mobile dual-bander to install in a vehicle with the head separated from the transceiver body you should be aware of the following:
I was planning to save a few dollars and get the FTM-300DR which seemed to have all of the operational features I wanted and more. However, when I looked closely at how to actually install it into the vehicle I saw a different picture. If the transceiver is mounted in the back of the vehicle and the control head in the front, the FTM-300 requires three separate cables go go between the transceiver and the control head. 1. The control cable, 2. a microphone cable (there's no mic jack in the head) and 3. a speaker wire, and you will probably need to buy and mount a separate speaker up front (there's no speaker or speaker jack in the FTM-300 control head). The FTM-500, by comparison has speakers in both the control head and the transceiver body and has microphone jacks in both places as well. So all you need is a single control cable between the two parts.
A much simpler installation.
Hi such good advice , thanks 73
Finally installed my FTM-500 after running the 400 in my Toyota for 2 years. I love the PMG function. Is there a way to scan the memory without scanning the WX frequencies?
Hi, : th-cam.com/video/4Val8EgsHHo/w-d-xo.html
Thank you for posting. Very Helpful.
Cheers
The search on my FTM 500 doesnt work correct either but on the FT5 works perfect! maybe a bug?
Try partial reset
More info on how you setup and were using this with a hotspot please
th-cam.com/video/UJiG5F780ck/w-d-xo.html
Excellent overview
Thanks
I’m looking seriously at this radio and it’s seems to be a bit Marmite. I want it for mobile use but don’t see many U.K. based hams using it outside of their QTH. So how simple would it be to use under mobile conditions? Don’t mind programming at home APRS is not something I’ve ever used. Welcome feedback regards Mike
Hi , aprs will work brill then u add UK Repeaters at home use a Hotspot for C4M , alot to learn with modern Radios .
For a couple of months I've been trying to like this radio. But I can't pull the trigger on buying it because I think it's just too damn ugly. some ham radio operators have it sitting on the dash of their vehicle and it just looks so stupid. LOL. It's actually uglier than the icom 7100.
I prefer the Yaesu ftm300 much better value
under display backtrack i have just a grey screen with headings, how do I get it back to a compass like yours? Tom K1CXS
Go in display settings
When I’m on my hotspot, it is not as clear as yours. Do I need some settings set up for C4FM. It just keeps dropping out
Normaly bad internet.
@@HamTechRadioScannerDrones Ive changed the frequency to a lower freq than the 438. so far this seems to have cured the problem
This was very informative. 73
Thanks
Andreas, can the main speaker be muted? If so, how does the front alone sound?
Yes and sounds good .
Do you know why when I press “P4” on my mic, all I get is an audible tone with no weather channel audio?
th-cam.com/video/YxrNG7Ro8XE/w-d-xo.html
is there a way to swop that distance from km to miles
Yes look in GPS /APRS settings
no i cannot find it on the ftm500
@@HamTechRadioScannerDrones
Does anyone know how to “lock out” a unwanted channel?
th-cam.com/video/ugKwnJ6SV-w/w-d-xo.html
Overpriced gimmick that's useless for Simplex Operations, aka when the SHTF!. IF you want to play "Internet" just USE your damn phone!
No
Shudafucup sad ham.