Acceleration TESTS Before Mods! - Yamaha MT 03

แชร์
ฝัง
  • เผยแพร่เมื่อ 12 เม.ย. 2024
  • I plan on getting an ECU reflash, velocity stacks, and an AIS block off plate on my Yamaha MT-03, but before modding, let's see how quick the bike is! Acceleration tests are performed in each gear with a final 5mph - 60mph acceleration run to set the baseline performance numbers of the bike. How quickly does a fairly stock Yamaha MT-03 accelerate? The bike does have a full exhaust installed from Two Brothers Racing, but without a tuned ECU the performance may actually be hurt rather than improved in it's current condition. After the modifications, I will repeat this testing to compare. The ECU reflash will be from Two Wheeled Dyno Works, the velocity stacks and air injection system block off plate is from TST Industries.
    Affiliate Links:
    Stock Dunlop Sportmax GPR-300 Tires: ebay.us/qXbMwn
    Bridgestone Battlax RS-10 Front Tire 110/70-17: ebay.us/wzHhCg
    Bridgestone Battlax RS-10 Rear Tire 140/70-17: ebay.us/d8H34J
    Flat Tire - Plug Repair Kit: amzn.to/3J5Glul
    T-50 Torx Bit for Front Caliper: amzn.to/3VrXXrZ
    Torque Wrench: amzn.to/49fjd7j
    Maxima Chain Cleaner: amzn.to/3SZVq5h
    Chain Brush: amzn.to/3Ik0E7h
    Maxima Chain Lube: amzn.to/4bTGkHr
    Rear Paddock Stand: amzn.to/3SXM36l
    Blue Shop Towels: amzn.to/3uJRvBO
    3M Gloss Lucid Yellow Vinyl Wrap: amzn.to/40yvu3y.
    R6 Throttle Tube: amzn.to/42PxOod
  • ยานยนต์และพาหนะ

ความคิดเห็น • 21

  • @OneSmallFavour
    @OneSmallFavour 3 วันที่ผ่านมา

    im planning on doing these exact mods but the only difference is im looking to get a full akropovic exhaust. i relaly like your methodology of testing. great video

  • @mathzinrlk
    @mathzinrlk หลายเดือนก่อน +4

    I have plans to buy the mt 03, but here in brazil we dont have this color, and i really enjoyed your bike color.
    Nice vid too mate, keep going with this great content about this awesome bike.

    • @mt03experience
      @mt03experience  หลายเดือนก่อน +2

      Thank you! And just so you know, this color is not available anywhere directly from Yamaha. I removed all the plastics and had a friend cover them with 3M Gloss Lucid Yellow vinyl wrap ;)

  • @njgfpv3696
    @njgfpv3696 หลายเดือนก่อน

    That thing is a pig. It makes sense to get the ecu flashed as some fool put on a full exhaust. However, you shouldn't put any more money into performance on an mt03. You are only hurting resale value, and it will always be an mt03. That bike doesn't have enough power to be safe on the road. Practice and spend your money on upgrading to a new bike. Not hating, I like the educational content of you showing just what the bike will do.

    • @jacoddeoca2764
      @jacoddeoca2764 หลายเดือนก่อน +9

      you sound like a hater. let that man do his own thing, without your negativity

    • @mt03experience
      @mt03experience  หลายเดือนก่อน +7

      I've had a lot of different bikes over the years, from VFR800s up to superbikes (a CBR1000RR) and Ducati Multistradas. I currently also own a Concours 14 which is a rocket. Even though I have and have had faster bikes, I'm really enjoying the MT-03. I love wringing it's little neck, bouncing off the rev limiter, and not hitting jail time speeds so easily. A friend has a track prepped R3 and the extra bit of power and rideability from a flash and full exhaust makes it more enjoyable. I've taken bigger more powerful bikes to a few track days, but the track day I did on my MT-03 was the most fun I've had on track. I'm enjoying it for what it is.

    • @hpzzz
      @hpzzz หลายเดือนก่อน +2

      @@mt03experience Don't you think it would be better to build a ninja 400 for the track?

    • @PrestoninParadisus
      @PrestoninParadisus หลายเดือนก่อน +10

      "doesn't have enough power to be safe on the road" keep squidding sweetie pie

    • @njgfpv3696
      @njgfpv3696 หลายเดือนก่อน

      @@PrestoninParadisus I will. Good luck on the road, sounds like you need it.