Cheers, it can be especially when you can't step far enough back to see it properly. This one leans to one side a bit but it'll be ok for a few more trims👍
The Michaelangelo of hedge trimmers! That's why I first started watching your channel. To see the WAY to do it! (Maxwell recommended you). Most grateful for the lessons and inspiration! I now have three hedge trimmers and make a bit because I know what you're doing!
The hla 66 I was using here sure needed a sharpen. Check out Rob over at rjl gardens he has som great videos on the topic. Mine just get an angle grinder waved near them😅
That is a similar size to one I do, it backs up to a garage wall so a real,pain to get to the back of it, pretty much use identical set up, what blower is it you use and is the battery life any good in the real world ? Always a fun watch pal 👍
That sounds a challenge mate, think it's the bg100 battery lasts pretty well unless using turbo mode, a pleasure to use in maintenance days. Cheers and have a good weekend 👍
Sounds painful, base of ladders are always jammed into or against something otherwise I don't go up them, seen too many slip backwards when not footed. Good luck on the recovery 🤞
Thanks again for a no nonsense how to trim a bay...over a pond?? Also like the tip about using a mesh for covering the pond.
People dont understand how hard the work actually is and equipment you need is a lot .i see how hard you work Nathan good luck mate 👍
Some days are tough as you know and kit...it's everywhere at the moment 😬😅 have a good weekend Justin 🍻👍
You to im doing nothing just recharging
Lovely job 👏
Cheers 👍👍
Lovely job 👍
Cheers 👍
Looking great. Harder cutting nice round shapes than people realise. Good job
Cheers, it can be especially when you can't step far enough back to see it properly. This one leans to one side a bit but it'll be ok for a few more trims👍
Hi Nathan nice job Have a good weekend thanks again
Cheers and have a great Easter weekend mate👍🐤
The Michaelangelo of hedge trimmers! That's why I first started watching your channel. To see the WAY to do it! (Maxwell recommended you). Most grateful for the lessons and inspiration! I now have three hedge trimmers and make a bit because I know what you're doing!
Thanks, I wouldn't go that far but cheers 👍👍 I've plenty of practice at getting it wrong too for sure. Have a good weekend 🍻👍
The weather is rubbish next week again. I'm going to keep mowing this weekend. Nice trim 👌
I think we're all hoping for a dry week but apparently not🙄 enjoy your weekend even if you're working 👍🍻
Great job Nathan
Bay trees always look nice when kept trimmed like that
Have a good weekend if your not working!😅👍
Thanks Mark, you have it down to an art these types of trims 👌 on some quotes and weed treatment this morning then I'm done👍 happy Easter mate
Any chance you could do a hedge trimmer sharpening vid ?
Nice job !
The hla 66 I was using here sure needed a sharpen. Check out Rob over at rjl gardens he has som great videos on the topic. Mine just get an angle grinder waved near them😅
Tree looks beautiful, great job !!!!!
Cheers 👍it's been there a while that one
Great job, just goes to show, no need to rush 😊
Cheers, sometimes you just need a steady day 😅
Oh Matron
What a nice trim bush 😂
😂 exactly 👍👍
Lovely job 😊👍
Thanks 👍👍
top notch mate, love the ladder
I'd rather my tripod 😅 cheers 👍
Great job mate✂️🍃🌳👍🏼
Cheers mate, just what we all do I guess but a nice bit of variety from my usual graft😅👍🍻
👍 have a good weekend mate 🍻
Cheers 🍻 you too👍👍
Nathan great job sharp finish happy easter mate.
Damien from Cork City
Thanks mate, you too 🍻👍
Nice job Nathan 👍hope you’re going to dry those leaves off and use them for cooking 🤪
Thanks 👍 oh yes, I've definitely got time for that😂😂
That is a similar size to one I do, it backs up to a garage wall so a real,pain to get to the back of it, pretty much use identical set up, what blower is it you use and is the battery life any good in the real world ? Always a fun watch pal 👍
That sounds a challenge mate, think it's the bg100 battery lasts pretty well unless using turbo mode, a pleasure to use in maintenance days. Cheers and have a good weekend 👍
Hey buddy great job! Is that the hl86?
Hla86
Hi, thanks. Yes used the 66 and 86 on this. The 86 is so handy on some jobs. Cheers 👍
I thought you would straighten the underside as well.
Customer likes it left as low as possible as her cats like to shelter under it👍
Trailer net/ cover. What size is it?? Watch a few of u in UK, I now carry debris bags in tool box, .
Fits over a caged 12'x6' trailer so maybe 16'x10, I forget the exact size. Thanks for watching, where are you based?
@@LewisgardenservicesLtd southbury, CT..
Never a good idea. I fell off a ladder last year doing same thing. My knee is still fu....
Sounds painful, base of ladders are always jammed into or against something otherwise I don't go up them, seen too many slip backwards when not footed. Good luck on the recovery 🤞
Thanks again for a no nonsense how to trim a bay...over a pond?? Also like the tip about using a mesh for covering the pond.
Cheers 👍 thankfully the pond was small so everything didn't sink. Thanks for watching