Revive Face ID: iCopy Plus 2.2 & New Face ID Board Restoration Tutorial (No Soldering Needed!)
ฝัง
- เผยแพร่เมื่อ 6 ก.พ. 2025
- Want me to do this repair for you?
Make sure to check out our mail in repair services.
Maybe your device will be in a video!
Mail in Repair Service www.fixdirepai...
Unlock the secrets to effortlessly restoring your Face ID with our comprehensive tutorial! In this step-by-step guide, we'll walk you through the process of using the iCopy Plus 2.2 and the latest Face ID Board to revive your Face ID functionality, all without the need for soldering. Say goodbye to frustrating Face ID issues and hello to seamless authentication once again! Whether you're a beginner or a seasoned tech enthusiast, our detailed instructions will ensure a smooth restoration process. Watch now and rediscover the convenience of Face ID on your device.
My Repair Must Haves
Vacuum Heat Plate amzn.to/430qlmI
Cutting wire amzn.to/49SswLi
UV light amzn.to/49SZevX
LOCA + Glue gun amzn.to/430qvdO
Microscope amzn.to/3Tj5fMZ
Extra light for Microscope amzn.to/49SszGY
Tweezers amzn.to/42ZsnU4
Clean Room Wipes amzn.to/42YJwNQ
Cleaner Dispenser amzn.to/3uK8cNv
Acetone amzn.to/49AfbHQ
99% Isopropyl Alcohol amzn.to/49B79P1
New Board
www.mobilesent...
Programmer
www.mobilesent...
I love how some people genuinely just like to make things easy for others
While everyone is having netflix & chill , this is my netflix and chill watching videos like this 😂 i cant be the only 1 😂 ........ Edit, Also your very talented, This is one of the toughest phone repairs to do, I fix apple phones and this is my worse enemy 😂
Thanks for understanding the level of difficulty some of these repair’s entail
Question , how many times can you reuse the flex cable
does this faceid error happen once you replace your battery? or how does this error even occur in the first place?
Thanks a lot and will be much more grateful if you can use the same I copy plus 2.2 to increase battery efficiency and charging cycles as well
Hi sir, thanks for the video.
I was wondering how it’s possible to buy a new face id components and do the programming to be works on used motherboard, can it be done with this tool?
No, it’s designed only to fix the original part to get Face ID back.
@@FIXDPHONES Okay, how then it’s possible to get face id work on another board?
With another hardware tool or some another way?
What if I replace iCloud chips ( CPU, Nand etc.) from iCloud clean board on other phone board which has Face ID?
Hey bro, what if I had an iPhone 11 with a broken face id ribbon and I had to take Face ID from another iPhone 11 would this method still work?
No, you'd need to do extra solder work to swap the component from one flex to another.
Does it have a way to power it via battery
Cool stuff, does this device’s program also come in a macOS version?
Unfortunately no.
Hi, so you have to keep the dot flex clipped on, if it is removed no more face id. So for every repair a new flex is needed, correct??
A new tag on flex yes.
Hi. Can i restore Face ID, if i don't get any "red errors"? When i read camera, those D S A B are green color?
I made a mistake in one of the steps, instead of going to activation, I went to cloud burn and ended up recording the backup on the faulty Face ID. Then I went to activate it, it activated.. but when recording in the new flat (tag) it gave me this error... burn data interrupt qianli repair ..there is a solution
I keep getting error when trying to use icopy 2.2 for face ID repair. I cloud back up and when click activation I get activation failed, please try again
If the cable is detected abnormally, please remove the extension cord or use the chip solution to fix it.
very cool. found a cracked (smashed top) iphone 11 (not max/mini/pro, just 11). said face id not working once cleared it out. replaced the screen and the settings just state, face id has an issue, but won't say what kind of issue. the connector looks fine. so, my question is this... can the copy device possibly read the code from original - and from there, program the mini part and use a aftermkt (amazon $15) camera/id assy and have it work?
So what about if it just doesn’t work but you don’t get that error
hello. This a great a new repair metod. But I have an issue: maximum activations. I repair my iPhone Xs but i can not repair more. I have made a new account but... no progress
Is there a non-solder method for a damaged infrared sensor flex?
Hi, can you use this method when replacing an iPhone 11 Pro Front camera module?
so you hooked up an additional power supply to the board what kind of power supply do I need. and what does the voltage need to be.
the reader should come with one
How much are the tags?
Would this work for a faceid module that is not working due to water damage? My suspicion is that it’s not actually corroded (phone was immediately dried), but it triggered a permanent error state that needs to be undone. Thoughts?
Hi, due to battery problems my iPhone XR cant be detected by the pc while connected via cable, do i have any other solution?
You could connect a battery without issues and see if that helps it be detected. If that still doesn’t work maybe something on the motherboard can be fixed to help it be detected.
Can mail to your shop?
Hello! Is it possible for me to get another front camera set and cloudbackup it instead of using the tag-on flex?
Unfortunately no
Hi. Thanks for the video. I noticed that the iCopy Plus device was displaying a 'Abnormal Luminance' message at one point, what does that mean!
Thanks
Hy sir can work if camera face id change with another phone?
Seems like you can, the thing seems to copy delete and write serial numbers to the module.
@@kiimcardashian8093 No you can't
My iPhone XR motherboard was charged can that program my Face ID to work with new motherboard?
Each front facing camera assembly is paired to its original motherboard so this programmer cannot help if either is not original to the other.
anyone ever had the error of High pressure detection is abnormal when activation
You have to power the board separately from the outlet.
Will this work (technically) on an iPad Pro 12.9 4.Gen?
No.
Not possible with iPads at all currently only select iPhones
did you replace the dot projector or you kept the original?
keep it original
will this work if you connect a use a replacement camera? also where can you get the tagon cables?
no need repair? it face id one set cost low.
Name software qianli ? 🤔 respond please 🥹
Go to qianli’s website and you will find it under downloads
Hye,is it using new camera/face id module or using the original old module that is broken?
May I know the success rate and which condition will it work and which will not…since the tag and device quite pricey for some so don’t wanna waste on something that I can’t fix 🥹🥹🥹🥹
That’s the whole point. I’ve shown how to do the repair the long and hard way in previous videos, but this allows for the repair to be done quickly without the soldering and attention to detail under magnification for an hour. Sure it’s great that I can do it the old way but if it’s as easy as pressing a few buttons who wouldn’t want to do that instead?
The original old module is used for the repair as both the dot projector and infrared cameras are still the paired components to that phone for Face ID functionality.