I am not a body person or mechanic but this young man has created one of the best technical how-to videos that I have seen thus far. Great job here! Probably has a career in teaching.
This is one of the best do-it-yourself videos I've seen very well explained, excellent camera work no fast talking, leaving out important steps you did a great job bro!!
You need to loosen the set screw, usually Torx25, that holds the key lock cylinder (found on side of door under a little rubber circle plug ) and back out the entire lock a couple inches from the front of the door handle BEFORE you remove the door actuator. Stick the key in, turn it a little and pull it out 2-3 inches. If not, then you will ruin the door lock cylinder when taking it out. This is why he says you need "elbow grease" cause he's ripping the spring-loaded lock cylinder out of its housing within the actuator and destroying the keylock capability; its removes easily when done correctly. And you cant just hold it back up in there if you bust it apart you will have to remove the entire lock cylinder and rebuild it. If its already broken, good thing a new kit is like 8 bucks. Hope this helps and maybe will get pinned or moved up to help the most people💪💪 but otherwise EPIC video/sound quality (thumbd+subd)
Thanks a bunch! You saved me when replacing the latch on my 2015 M4. The 4:30 point of the video showed how to get the latch free from the cable. I bought a used latch on eBay and it already had the cable attached to the latch so I thought the cable needed to be connected somewhere at the end opposite the latch & that would have been near impossible. On the M4 the window bracket does not have to be removed or loosened to remove the latch. Still breathing heavy like I won the lottery.
You are amazing!!! I changed both driver and passenger actuators in less than two hours. I watched another video for directions with the key lock. The other video was helpful with that. But you saved me a ton of money. Thank you!
For those having trouble getting the latch-actuator assembly past the regulator track: Turn the latch-actuator assembly 90 degrees -- counter-clockwise if working on the left door, clockwise for the right. Slide the assembly down (as low as you can get it) and towards the hinge side of the door. This is where the track is the most flexible. Push the track away from you and slide the latch-actuator assembly towards the hinge side of the door even more. At least on my 2006 Bangle-ized E90, this maneuver got it right out. And definitely see the comments and videos about the little plastic access plug and the bolt behind it (4mm Allen head) to remove and reassemble the mechanical lock cylinder and the rod that connects it to the latch-actuator assembly.
With the key lock insert it into the door lock side first. You can rotate the actuator while it’s in there to set it in place and it’ll slide right up into position. Hopefully this helps someone in the future. Thank you for the in depth guide!
Thanks for the great video! Works a treat, swapped a broken actuator with a scrapyard part for £15 in less than 20 minutes.. main dealer had the audacity to ask for £180 plus labour! Love YT tutorials me!
You need to loosen the set screw, usually Torx25, that holds the key lock cylinder (found on side of door under a little rubber circle plug ) and back out the entire lock a couple inches from the front of the door handle BEFORE you remove the door actuator. Stick the key in, turn it a little and pull it out 2-3 inches. If not, then you will ruin the door lock cylinder when taking it out. This is why he says you need "elbow grease" cause he's ripping the spring-loaded lock cylinder out of its housing within the actuator and destroying the keylock capability; its removes easily when done correctly. And you cant just hold it back up in there if you bust it apart LOL you will have to remove the entire lock cylinder and rebuild it. If its already broken, good thing a new kit is like 8 bucks.
@SuperLegitGuy literally just did this snapped thr whole tumbler waiting on q rebuild kit so I can fix my rookie mistake on my f30.. if only I hadave came across your comment 1 day earlier lol
This is great But the first step should be removing the key lock (on the driver door) first. There will be a rubber plug above the screws holding the cyldiner into the actuator. The bolt will be on a angle facing towards the outside. After loosening the bolt [torx 25( it shouldn't come out)] you can wiggle out the part where the key goes in. The light does NOT come out with it. The metal peace he talked about putting back in will come out in place, it is locked with a push pin and has a release. You don't need to take it off of the lock cylinder. Do the rest of the video as instructed, you will notice not much elbow grease is needed to remove the lock actuator. And install last when the actuator is in place, reinstall and tighten down the set screw and your manual key should still work just fine.
Great instructions that gave me confidence to replace my rear passenger actuator. Door lock would not unlock from key fob or master lock switch on interior control panel. Bought replacement part from Parts Geek for $150 and saved $500 from getting the dealer to fix. Keep up the good vids.
Thanks for sharing this video. It has helped me a lot. I have just repaired my actuator and wonder, can I test it is working before I put the panel back on the door?
Thank you for the video. I installed the actuator on the driver side by following your tutorial. After putting everything together, things work with the key fob. But the central dash button to lock all doors does not work now. I wonder what would have gone wrong
I'm in the process of doing that myself with the use of Buddy's very detailed video, just one question, how do I get the old actuator out of the door from that metal arrow thing that is the only thing connected still... I can't quite grasp what Buddy means there 🙈😅 Amy help would be greatly appreciated 🙏🏻 TIA
For the door lock rod, as you position the actuator, get the rod positioned at the receiving point of the actuator before finally positioning and bolting down the actuator. It's easier than it looks, got it on the first try.
Hey thanks for the guide was helpful, for your information for the future to fit the metal link between the actuator and the key lock you remove the handle. Loosen the one screw on the inside of the door, pull the lock cover off leaving the led in place and the lock and bar come out. Fit any replacement lock bar afterwards like that. :)
Nice video! Admire all of those who commented and said that your video gave them the confidence to do the job! I am having issues with the central locking on a 2004 Z4 I just acquired! And have to tell you, video or no, I won't be touching that! You're a star .I am not! Just have to fork out the cash to get it seen to! All the best mate! Thanks for taking the time to record, post and educate us through your video! Liked and subscribed!
Really useful until the part where you remove the 2 x 10mm nuts to loosen the window regulator. I have an E93 and there is only 1 10mm and it does not budge when removed. Any idea how to get the old mechanism out?
I did yes! Underneath where the door latches, there is a black bung which you have to remove and then get a long extension socket in to remove the other regulator bolt.
Good morning, following a centralization problem on my front left bmw f20 door, I changed the electronic lock. centralization works again but manual opening/closing (with the key) no longer works. Do you know where it could come from? THANKS
Yeah, the video was well done. I think the flexibility of that regulator brace may be determined by the particular regulator. There was no way that mine was going to give enough, even with a pry bar, to get the actuator out without breaking. I ended up having to detach the window from the regulator and then it would give enough to let the actuator out. I saw another video where the guy took the entire regulator out, but that's not necessary.
My way was the easiest way for sure. There is alot of flex on that brace. I was scared to do it at first but after changing a few of them I have faith in the flexibility of that brace! Glad you got it done!
Great video! My 1series passenger door has failed and I can't get it open to get at the side T30s. Any suggestions? I'm guessing there's a way to manually operate the lock once I have the door lining off but can't work it out. Thanks
My rear left door rod is bassically doingthis weird rapid thing when I click unlock. Do you think the actuator is the cause or is it possible something has just shifted or come loose?
I replaced the actuator on my passenger door, reconnected everything back in, put the screws all back, and tried out the key fob and it works! However 1 problem, the handle from the outside won’t open the door, so I’m unsure whether or not I put everything back correctly. Any ideas as to what might be causing this?
Thank you so much, this helped enormously but I cannot for the life of saint Peter get the actuator out, that sucker will just not budge past the window Guide bar!!!
Done in 2 hours. Could not have done it without this video. I'm obligated to subscribe. Just a like would be a cheap ass. Only only part the video did not work for me was to pull down and out on the white plastic thing inside the door. After futzing awhile I pulled on the accordion part of it to release it.
Hi i just replaced my drivers side front door actuator it came with a cut of wiring harness for the electrics that go into the actuator..do i need to clip the wires and install the one provided as when i lock it it doesn't open again aam i doing something wrong ? Thanks..UK subscriber
Hi I did this and everything worked out great, but a day later it went back to it doing that noise and not opening again, the actuator is brand new, any idea of what the issue is ?
Thanks for the video Ima do it but I have 3 door actuators that went bad at the same time......u made it look easy ho ppl e I can do it......thanks again man
I got a 2007 bmw 323i e90, my car door locks fine but does not unlock from outside or with the key, i can open the door from inside, i have checked the chlid look it was fine, do i need to change door lock?
Hey Buddy, great clear guide. Do you know if drivers side actuator from left hand drive 2008 3 series works on a front passenger of a right hand drive? Looks from your guide like it might, that the key hole can just be switched, but part is otherwise generic?
@@BuddysDIY Thank you for the response. i appreciate it. i recently took out the left front actuator for repair. i tried to mout back the actuator in place but i am having problem with getting door key lock cylinder screw in. tried all i could but still stuck there. i also got problem with actuator completely no connection with central lock with key fob. all other three doors actuators response. i could at least lock manually with key but that doesn’t work either. in addition problem with getting screw key lock cylinder in place as mentioned above. what am i doing wrong here? sorry for long thread. hope to listen some insights. Thanks
@@omchhetri5541 oh brother good luck getting the cylinder core In there haha. And have you checked for fuses on the door that is not working? Sometimes an entire door will not work due to a fuse.
E92/93 Owners: the window guide unbolts from inside. You will need to remove the rubber grommet on the lower back of the door and run a long extension with a 12 or 13mm socket to remove the bolt.
Good Video, I have a question I have a Z4 2006 the passenger side door the actuator is bad, but my problem is the door is locked, can the door panel on top be removed enough to get to the actuator to unlock the door. Just thought I ask. Thanks
Very good video for e90to e93 door actuator replacement. The only thing Idid not see on reassembly is just before removal removal of actuator u disconnected upper n lower pins and u did not show reconnection on reassembly .WHY?.also I am interested in buying socket kit n torx bit set. How can I
Be sure to put the clips back correctly (4.30 on the video), else your door may get stuck in the closed position. I had that experience. Better still, test the locking mechanism before shutting the door
@@BuddysDIY Great vid. By the way, the door lock from outside is the easiest bit. Take off the little round cover on the side of the door to get access to a 4mm hex bolt. Undo that and the key lock mechanish from the outside comes out, complete with the lock bar thing. Leave the LED light in place. Once the new actuator is in place, simply push the door lock back into it, and do up the hex bolt.
Sir is the manual way to unlock affected Too if the actuators has failed - I can’t use my key to unlock all the time - ocassionally it will unlock - any idea or thoughts ???
When i plug in the new actuator i tried locking and unlocking doors with fob and they all unlock but now lock button doesnt lock any doors. What can i do to fix this?
if you dont proper seal the gray material and also the white/gray bumbs that holds the front door panel (see they have a small gasket that should be replaced if very thin) you will encounter water leaks inside car on front site of the car
I have a 2008 3series coupe , my door lock passenger side has died completely , no noises at all when pressing alarm buttons , it just won’t work ? When I lock car manually from inside passenger side and get out the car I press button it all locks up but when I press button to open only drivers door lock opens , passenger door stays down locked ??
Im about to do this job, couldnt you just remove the entire "exterior" portion of the lock cylinder/cover and reinstall it when the actuator is back in place? Any help would be great thanks!
@@BuddysDIY strange this was a while back but i popped off that cover unscrewed a bolt and didn't have any issues reinstalling the lock cylinder to the new actuator thankfully
thank you for this video i already ordered two door lock actuators driver side and rear passenger side cant wait to make a diy myself,😊 btw do i have to disconnect the battery while doing the work or its just fine to leave it connected? i hope to get answer thank you so much!
I have a question , so my daughter kept pulling on the door latch several times , noticed that a couple days later the door stayed locked doesn’t open or close even when unlocking the door , is that the actuator issue ? Thanks
@@BuddysDIY yea I can as a matter of fact just removed the door panel with the door being locked and then unlocked it and locked it and you can still hear it , 🤔
@@benzoh28 I'd just go thru the video and make sure all the parts align. Stick your head or a phone camera I. The door frame and press the button and see if the actuator is doing what's it's supposed to do.
I changed my rear door lock and it works fine with the key fob. But it doesn't open from the inside now. When the passenger pulls the inside handle, the door won't open. They need to be let out from the outside. Anybody know what the problem could be?
THE BEST VIDEO on TH-cam of replacing the BMW door actuator. Well done Buddy!
I was literally about to comment this lol. Thanks bro!
I am not a body person or mechanic but this young man has created one of the best technical how-to videos that I have seen thus far. Great job here! Probably has a career in teaching.
This is one of the best do-it-yourself videos I've seen very well explained, excellent camera work no fast talking, leaving out important steps you did a great job bro!!
You need to loosen the set screw, usually Torx25, that holds the key lock cylinder (found on side of door under a little rubber circle plug ) and back out the entire lock a couple inches from the front of the door handle BEFORE you remove the door actuator. Stick the key in, turn it a little and pull it out 2-3 inches. If not, then you will ruin the door lock cylinder when taking it out. This is why he says you need "elbow grease" cause he's ripping the spring-loaded lock cylinder out of its housing within the actuator and destroying the keylock capability; its removes easily when done correctly. And you cant just hold it back up in there if you bust it apart you will have to remove the entire lock cylinder and rebuild it. If its already broken, good thing a new kit is like 8 bucks. Hope this helps and maybe will get pinned or moved up to help the most people💪💪 but otherwise EPIC video/sound quality (thumbd+subd)
Thanks a bunch! You saved me when replacing the latch on my 2015 M4. The 4:30 point of the video showed how to get the latch free from the cable. I bought a used latch on eBay and it already had the cable attached to the latch so I thought the cable needed to be connected somewhere at the end opposite the latch & that would have been near impossible. On the M4 the window bracket does not have to be removed or loosened to remove the latch. Still breathing heavy like I won the lottery.
You are amazing!!! I changed both driver and passenger actuators in less than two hours. I watched another video for directions with the key lock. The other video was helpful with that. But you saved me a ton of money. Thank you!
Can you please provide the link to the other video for directions with the key lock? Thanks!
@@carlolombardo8849 I don’t recall. Search through TH-cam for that specific issue with E90. It was a fairly simple fix.
Easily the best video on this. Thanks bud
For those having trouble getting the latch-actuator assembly past the regulator track: Turn the latch-actuator assembly 90 degrees -- counter-clockwise if working on the left door, clockwise for the right. Slide the assembly down (as low as you can get it) and towards the hinge side of the door. This is where the track is the most flexible. Push the track away from you and slide the latch-actuator assembly towards the hinge side of the door even more. At least on my 2006 Bangle-ized E90, this maneuver got it right out.
And definitely see the comments and videos about the little plastic access plug and the bolt behind it (4mm Allen head) to remove and reassemble the mechanical lock cylinder and the rod that connects it to the latch-actuator assembly.
Great advice thank you
Thank you, went through about 5 vids, this one cleared up teh last little bits, cheers
With the key lock insert it into the door lock side first. You can rotate the actuator while it’s in there to set it in place and it’ll slide right up into position. Hopefully this helps someone in the future. Thank you for the in depth guide!
Thanks for the great video!
Works a treat, swapped a broken actuator with a scrapyard part for £15 in less than 20 minutes.. main dealer had the audacity to ask for £180 plus labour!
Love YT tutorials me!
So does that mean all the BMWs that you flip that have broken driver side door lock actuators can't be unlocked with the door key
Literally just bought one same issue
You need to loosen the set screw, usually Torx25, that holds the key lock cylinder (found on side of door under a little rubber circle plug ) and back out the entire lock a couple inches from the front of the door handle BEFORE you remove the door actuator. Stick the key in, turn it a little and pull it out 2-3 inches. If not, then you will ruin the door lock cylinder when taking it out. This is why he says you need "elbow grease" cause he's ripping the spring-loaded lock cylinder out of its housing within the actuator and destroying the keylock capability; its removes easily when done correctly. And you cant just hold it back up in there if you bust it apart LOL you will have to remove the entire lock cylinder and rebuild it. If its already broken, good thing a new kit is like 8 bucks.
@SuperLegitGuy literally just did this snapped thr whole tumbler waiting on q rebuild kit so I can fix my rookie mistake on my f30.. if only I hadave came across your comment 1 day earlier lol
Many thanks from the UK 🇬🇧 👍! Probably the best tutorial video I have watched on TH-cam. Very clear and easy to understand. Thank you very much!
This is great
But the first step should be removing the key lock (on the driver door) first.
There will be a rubber plug above the screws holding the cyldiner into the actuator. The bolt will be on a angle facing towards the outside.
After loosening the bolt [torx 25( it shouldn't come out)] you can wiggle out the part where the key goes in.
The light does NOT come out with it.
The metal peace he talked about putting back in will come out in place, it is locked with a push pin and has a release. You don't need to take it off of the lock cylinder.
Do the rest of the video as instructed, you will notice not much elbow grease is needed to remove the lock actuator.
And install last when the actuator is in place, reinstall and tighten down the set screw and your manual key should still work just fine.
Great instructions that gave me confidence to replace my rear passenger actuator. Door lock would not unlock from key fob or master lock switch on interior control panel. Bought replacement part from Parts Geek for $150 and saved $500 from getting the dealer to fix. Keep up the good vids.
Thanks for sharing this video. It has helped me a lot. I have just repaired my actuator and wonder, can I test it is working before I put the panel back on the door?
Thank you for the video. I installed the actuator on the driver side by following your tutorial. After putting everything together, things work with the key fob. But the central dash button to lock all doors does not work now. I wonder what would have gone wrong
Replaced my driver side door lock accuator using your detailed instructions. Thank you!
No problem at all! Stay tuned for more great videos on bmws and more!
I'm in the process of doing that myself with the use of Buddy's very detailed video, just one question, how do I get the old actuator out of the door from that metal arrow thing that is the only thing connected still... I can't quite grasp what Buddy means there 🙈😅
Amy help would be greatly appreciated 🙏🏻 TIA
Excellent video sir
For the door lock rod, as you position the actuator, get the rod positioned at the receiving point of the actuator before finally positioning and bolting down the actuator. It's easier than it looks, got it on the first try.
Great , clear step by step video!!!! Thanks so much, this helped so much with my E90 and I fixed the driver door actuator.
Thanks for the video! It really helped keep the videos coming!!!
Hey thanks for the guide was helpful, for your information for the future to fit the metal link between the actuator and the key lock you remove the handle. Loosen the one screw on the inside of the door, pull the lock cover off leaving the led in place and the lock and bar come out. Fit any replacement lock bar afterwards like that. :)
I wish I saw this before cause I broke the thing
awesome video, saved me a lot of money thanks boss
Thanks a lot yo. I live in Australia where labor is sky high, your video helped me save at least $500
Das ist die beste Anleitung die ich je gesehen habe 🙂 sehr verständlich erklärt Super👍
Hilft mir schön weiter.
Nice video! Admire all of those who commented and said that your video gave them the confidence to do the job! I am having issues with the central locking on a 2004 Z4 I just acquired! And have to tell you, video or no, I won't be touching that! You're a star .I am not! Just have to fork out the cash to get it seen to! All the best mate! Thanks for taking the time to record, post and educate us through your video! Liked and subscribed!
Thank you so much! You saved me a lot of time and money; instructions are very clear.
Thanks for the detailed video, I just didn't see you put the pins back on the new actuator.
Really useful until the part where you remove the 2 x 10mm nuts to loosen the window regulator. I have an E93 and there is only 1 10mm and it does not budge when removed. Any idea how to get the old mechanism out?
Did tou figure it out? I am at the same point...gotta be a way though.
I did yes! Underneath where the door latches, there is a black bung which you have to remove and then get a long extension socket in to remove the other regulator bolt.
Good morning, following a centralization problem on my front left bmw f20 door, I changed the electronic lock. centralization works again but manual opening/closing (with the key) no longer works. Do you know where it could come from? THANKS
Yeah, the video was well done. I think the flexibility of that regulator brace may be determined by the particular regulator. There was no way that mine was going to give enough, even with a pry bar, to get the actuator out without breaking. I ended up having to detach the window from the regulator and then it would give enough to let the actuator out. I saw another video where the guy took the entire regulator out, but that's not necessary.
My way was the easiest way for sure. There is alot of flex on that brace. I was scared to do it at first but after changing a few of them I have faith in the flexibility of that brace! Glad you got it done!
Thanks, my window guide rail wouldn't move until I dropped the window a bit from the drivers side switch, I guess it took the tension off the bolts
Thanks, best video I’ve found for this DIY
Well done Sir.. Truly appreciate it.. Video is simply excellent..
Great video! My 1series passenger door has failed and I can't get it open to get at the side T30s. Any suggestions?
I'm guessing there's a way to manually operate the lock once I have the door lining off but can't work it out. Thanks
My rear left door rod is bassically doingthis weird rapid thing when I click unlock. Do you think the actuator is the cause or is it possible something has just shifted or come loose?
I replaced the actuator on my passenger door, reconnected everything back in, put the screws all back, and tried out the key fob and it works! However 1 problem, the handle from the outside won’t open the door, so I’m unsure whether or not I put everything back correctly. Any ideas as to what might be causing this?
It's got to be a cable wasn't repositioned correctly. I'd watch the video again while you take everything apart besides the actuator
Did you ever figured it out? I also can't open my door from the outside
Thank you so much, this helped enormously but I cannot for the life of saint Peter get the actuator out, that sucker will just not budge past the window Guide bar!!!
Thanks so much, this helped so much with my E90. Finally fixed my door.
Thanks for the video, Great detail for sure. Really well done!
Thank you!! Appreciate that!
Hey! Those sackits look mighty fine!
its the same thing in all doors?
Exceptionally well done!
Thanks buddy, worth a sub😊
this is a life saver to save money 👌🙌🏻
For the door lock barrel step the one you skipped, is that only relevant to the driver side where you can put a key in?
thank you for the tip about the manual lock :)
Any chance you can do this if the door is locked and won't open? Managed to take the card out so I can see the actuator?
Try and take the pannel off from the inside of the car to open the door
@@BuddysDIY did that then had to drill it to get it to unlock
Done in 2 hours. Could not have done it without this video. I'm obligated to subscribe. Just a like would be a cheap ass.
Only only part the video did not work for me was to pull down and out on the white plastic thing inside the door. After futzing awhile I pulled on the accordion part of it to release it.
Hi i just replaced my drivers side front door actuator it came with a cut of wiring harness for the electrics that go into the actuator..do i need to clip the wires and install the one provided as when i lock it it doesn't open again aam i doing something wrong ? Thanks..UK subscriber
Nice video i changed in my bmw and its okay
Hi I did this and everything worked out great, but a day later it went back to it doing that noise and not opening again, the actuator is brand new, any idea of what the issue is ?
Thanks for the video Ima do it but I have 3 door actuators that went bad at the same time......u made it look easy ho ppl e I can do it......thanks again man
I got a 2007 bmw 323i e90, my car door locks fine but does not unlock from outside or with the key, i can open the door from inside, i have checked the chlid look it was fine, do i need to change door lock?
Hey Buddy, great clear guide. Do you know if drivers side actuator from left hand drive 2008 3 series works on a front passenger of a right hand drive? Looks from your guide like it might, that the key hole can just be switched, but part is otherwise generic?
I really can't remember but if I do remember correctly they are different man
Thanks so much. I have a question for you. ca i move rear left door lock actuator to the front on driver’s door? mine is 320D e90 2006 mod. 🙏
No brother unfortunately. The driver is specialty made to be able to take a key blade
@@BuddysDIY Thank you for the response. i appreciate it. i recently took out the left front actuator for repair. i tried to mout back the actuator in place but i am having problem with getting door key lock cylinder screw in. tried all i could but still stuck there. i also got problem with actuator completely no connection with central lock with key fob. all other three doors actuators response. i could at least lock manually with key but that doesn’t work either. in addition problem with getting screw key lock cylinder in place as mentioned above. what am i doing wrong here? sorry for long thread. hope to listen some insights. Thanks
@@omchhetri5541 oh brother good luck getting the cylinder core In there haha.
And have you checked for fuses on the door that is not working? Sometimes an entire door will not work due to a fuse.
E92/93 Owners: the window guide unbolts from inside. You will need to remove the rubber grommet on the lower back of the door and run a long extension with a 12 or 13mm socket to remove the bolt.
Good Video, I have a question I have a Z4 2006 the passenger side door the actuator is bad, but my problem is the door is locked, can the door panel on top be removed enough to get to the actuator to unlock the door. Just thought I ask. Thanks
Very good video for e90to e93 door actuator replacement. The only thing Idid not see on reassembly is just before removal removal of actuator u disconnected upper n lower pins and u did not show reconnection on reassembly .WHY?.also I am interested in buying socket kit n torx bit set. How can I
Be sure to put the clips back correctly (4.30 on the video), else your door may get stuck in the closed position. I had that experience. Better still, test the locking mechanism before shutting the door
knowing how to fix that? mines is experiencing tht..
Is it better to do with the window up or down? thanks for the video!
Hi buddy .Have a 2014 bmw 328ix door panelling is totally different from your video on actuator replacement .Don’t know how to start. Need help.
I just did this shit and you were right about the door lock 🤣 perfect video 👍
Lol thanks brother. Yeah that locking cylinder is impossible to put back lol
@@BuddysDIY Great vid. By the way, the door lock from outside is the easiest bit. Take off the little round cover on the side of the door to get access to a 4mm hex bolt. Undo that and the key lock mechanish from the outside comes out, complete with the lock bar thing. Leave the LED light in place. Once the new actuator is in place, simply push the door lock back into it, and do up the hex bolt.
This doeant work on e93 and i suspect e92. They window guide you unbolt and slide over is pretty much fixed. Any idea on how to get the regulator out?
Awesome.. helped a lot ..
Sir is the manual way to unlock affected Too if the actuators has failed - I can’t use my key to unlock all the time - ocassionally it will unlock - any idea or thoughts ???
When i plug in the new actuator i tried locking and unlocking doors with fob and they all unlock but now lock button doesnt lock any doors. What can i do to fix this?
did the key lock work to open the door?
Why didn’t you hook back up the wire harness to the actuator, where does that harness go to because I broke it off when I twisted off the harness?
6:12 how did you disconnect that piece from the door lock actuator while inside the door in order to take the actuator out?
I broke it lol
Great vid. So you don’t have to take the door handles off or crack the window 4 to 5 inches?
Done it without removing handle.
if you dont proper seal the gray material and also the white/gray bumbs that holds the front door panel (see they have a small gasket that should be replaced if very thin) you will encounter water leaks inside car on front site of the car
Nice job 👍🏼 thanks
I have a 2008 3series coupe , my door lock passenger side has died completely , no noises at all when pressing alarm buttons , it just won’t work ?
When I lock car manually from inside passenger side and get out the car I press button it all locks up but when I press button to open only drivers door lock opens , passenger door stays down locked ??
Im about to do this job, couldnt you just remove the entire "exterior" portion of the lock cylinder/cover and reinstall it when the actuator is back in place? Any help would be great thanks!
I've tried in the past with no success!
@@BuddysDIY strange this was a while back but i popped off that cover unscrewed a bolt and didn't have any issues reinstalling the lock cylinder to the new actuator thankfully
@@Jarequis2 can you send me a picture of what cover you're talking about?
buddysdiy@yahoo.com
@@Jarequis2 yea lol there is a peep hole for a number 4 Allen and bam you pull the whole cylinder out
@@BuddysDIY should update the video so people arnt breaking their stuff w your guide nice guide though overall
Any chance you can make a video for the E 63/E 64 650i drivers side?
Do yo need to disconnect the window from the guide, or will it move still attached?
Any idea how to get the tracks loose for a e92? Those nuts arent there on the door
thank you for this video i already ordered two door lock actuators driver side and rear passenger side cant wait to make a diy myself,😊 btw do i have to disconnect the battery while doing the work or its just fine to leave it connected? i hope to get answer thank you so much!
Does this affect the window from going up all the way ?
Did you have to take the door handle out ?
Thankyou broo 🤙🏼
Did you unclip the window? I've seen other videos and the window was unclipped and taped at the top.
I have a question , so my daughter kept pulling on the door latch several times , noticed that a couple days later the door stayed locked doesn’t open or close even when unlocking the door , is that the actuator issue ? Thanks
Can you still hear the click when pressing the lock button? If you can then it's probably not the actuator.
@@BuddysDIY yea I can as a matter of fact just removed the door panel with the door being locked and then unlocked it and locked it and you can still hear it , 🤔
@@benzoh28 I'd just go thru the video and make sure all the parts align. Stick your head or a phone camera I. The door frame and press the button and see if the actuator is doing what's it's supposed to do.
@@BuddysDIY I’ll give it a shot thanks a lot man really appreciate your help 👍
Thank you so much Buddy
Its the same for bmw f20?
Ever replaced door lock actuator e61 with S323 Soft-Close-Automatic doors ?
I am new to BMW DIY. I have a 2015 535, which door lock actuator will work for it?
Fcpeuro.com
Excellent Job
I'm still having trouble getting it pass the metal guide rod, anyone have advice?
The only down side to this is the ''insulation'' It's a vapour barrier and really should be sealed properly.
Do you have a link for the actuator
Check link. Will do it now
@@BuddysDIY thanks a lot 👌🏻
I changed my rear door lock and it works fine with the key fob. But it doesn't open from the inside now. When the passenger pulls the inside handle, the door won't open. They need to be let out from the outside. Anybody know what the problem could be?
Buddy i missed a step in doing this now my car wont unlock can you help me please
What if you changed already but it seizes and you can’t open the door
awesome high quality video :) \
My car isn't making that noise, the button just wont go up or down. Hoping its a fuse!
I just replaced the driver door actuator but now the door is locked idk what to do
Did you lock the key in the car?
Buddy's DIY no it was because i installed the cable for the door handle incorrectly
@@michaelpast19 so you the cable is not connected and the door is closed?
Buddy's DIY yup the cable wasn’t on tight enough and I installed the door panel and everything so I can to start all over again lmao mistakes happen
@@michaelpast19 haha yes they do. You should deff test it before you slam the door lol. Were you able to getnthe door pannel off with the door shut?
Replaced mine lasted three days and started same thing again..