video never too long when its as interesting as this , that white keeps coming up trumps with each panel / piece you apply definitely a fun RC and has lots of potential moving forward will go watch the couple running videos that ive missed ,thanks as always Earl,and yes i like the Kawasaki look but Yamaha is always nice too
Found one 1.5 hrs away so I'm gonna Grab it. I'm done waiting since June 23.... I think your in SCV if so Id like to join you and do some laps and have some fun!!!🏁
I have The Honda and the Kawasaki and waiting for my LHS to get another Red one I ordered. I have many parts and plastics. I will change my second red to a different unique look
I got to admit I like the green one better to color on and make it look much better Earl the red one kind of look a little do but they both are cool dirt bikes, 🍻👍😎
I just ran mine yesterday,took a minute to get used to controlling it but not 2 bad,it does turn wide tho,hopefully they will make a servo or something 2 increase the turning radius
It's all about braking, and turning, with throttle coming, after it's tipped, and almost pointed in direction you want to go. On pavement, it's definitely, the slower you are before the turn, the sharper you can turn. I can turn mine in 5' diameter easy!(after 2 wks), and still do decent lap times. It is a blast!
Someone needs to put out a video on how to clean the losi promoto mx dirt bike. I want to wash mines so bad but wondering what I can wet up and what I can't. Think u can help us all out on that Mr. Moorhead
Earl. Great Video. In your professional opinion, does the motorcycle require a bit more maintenance after every battery pack than an RC 4 wheel vehicle? I have a motorcycle on order, so I am watching all of your content and it seems that the motorcycle requires just a bit more care after each battery pack if I want to keep the bike in good running condition. Thanks again for the informative content!
Just dobyou know that plastic piece on the forks thT holds brake cable you don't snap in or out you slide the cable up first then out don't want to see you break the plastic or kink the cable friendly fyi
Be careful with those hole shots they wear down fast. When i 1st started racing 1/8 scale i went to the track at amain in chico on a hot summer day to pratice it was during the week so the track had not been waterd and i didnt think much of it well the brand new set if 1/8 buggy hole shots only lasted about 35-40 minutes. yep dumb move on my part i smoked a brand new set in about a pack and a half😢
Earl, you get 50% off the already glued moto wheels, did you get those from your local hobby store? I ordered mine with the promotion code two days ago.
Should blue lock tight be used on screws after removing them even once ? Parts sure are slowly arriving, we are going to have Street tires before our bikes 😆
There seems to be no lock tight on the plastics I removed even the inner covers and the rear wheel has a lock nut so far I haven’t seen any lock tight but I’ve not gone into the rc that far 💯
@earlmoorhead5555 just have them shipped. And I like the white plastic I think it will look cool with the graphics on. Mine is blue and I have all of the GPM and VITAVON upgrades. In aluminum and anodized blue . And I'm going to run the #238 to represent HAIDEN DEEGAN. he's running 2nd overall in points in the motocross. And won at Washougal. In an epic race winning both motos. Stay cool .
I feel like the materials for the promoto mx are not that good besides the option alu parts ,for that price losi could add some alu options the platform is all plastic 😑😑😑
Earl, I generally watch your channel, and appreciate your content, but I haven’t watched anything since you started making content for this stupid bike. Any idea when videos will becoming with non bike content? The thing can’t do front flips, can’t do back flips, and you can’t really upgrade the motor/esc for the thing.
I turned my bike and rider into Robbie Knievel, made a pair of white leathers and put the white plastic on my bike.
Mr Late to the Party here.. Thanks for your videos on the Promoto MX. I am hoping to get one of these soon!
It’s crazy how fast these companies produce spare/aftermarket parts. And yet it’s hard for me to find parts for my Nissan z.
Yes but these parts are all the same company parts even proline is owned by horizon hobby 😯so they knew it was coming
Good stuff, can't wait to see part 2
Great video , love the tips 👌 Maintaining the bike is really easy 💯💯
We plan to leave ours green with only upgrades to Street tires . May change numbers. The green n white looks good 👍
video never too long when its as interesting as this , that white keeps coming up trumps with each panel / piece you apply definitely a fun RC and has lots of potential moving forward will go watch the couple running videos that ive missed ,thanks as always Earl,and yes i like the Kawasaki look but Yamaha is always nice too
Thanks 🙏
Looking awesome good job and stay safe can't wait to see next video ✌️
Lots of maintenance on bikes in real life & it turns out that RC bikes are the same way. Thanks Eman
3:10, i have the same hobby knife Earl, CRAZY!!!
The more I run mine the more I like it This thing is a blast
I got it may I love the way you look now but the white and green if make it look like a supermoto good job Earl Moorhead 👍😎
superbe vidéo merci
Awesome ❤🎉
Found one 1.5 hrs away so I'm gonna Grab it. I'm done waiting since June 23.... I think your in SCV if so Id like to join you and do some laps and have some fun!!!🏁
I have The Honda and the Kawasaki and waiting for my LHS to get another Red one I ordered. I have many parts and plastics. I will change my second red to a different unique look
I was running a 2wd rc this weekend and felt like that got no traction. Can't imagine how hard it would be to get going with just one 😱
I got to admit I like the green one better to color on and make it look much better Earl the red one kind of look a little do but they both are cool dirt bikes, 🍻👍😎
You could plastic dip the white with a patern of your choice
Thanks!
Appreciate your support as it never gets old 🙏
I just ran mine yesterday,took a minute to get used to controlling it but not 2 bad,it does turn wide tho,hopefully they will make a servo or something 2 increase the turning radius
It's all about braking, and turning, with throttle coming, after it's tipped, and almost pointed in direction you want to go. On pavement, it's definitely, the slower you are before the turn, the sharper you can turn. I can turn mine in 5' diameter easy!(after 2 wks), and still do decent lap times. It is a blast!
Hole shot tires may be great for short grass
Earl, new to the promoto and enjoyed the vid. what’s the electric screwdriver you’re using there?
😎💯💯💯
Earl you can set it off man that gen look good 👍 making it your own all right 👍
Thanks 👍
The panels look good 👍 Not sure on color 🤔
Someone needs to put out a video on how to clean the losi promoto mx dirt bike. I want to wash mines so bad but wondering what I can wet up and what I can't. Think u can help us all out on that Mr. Moorhead
I’m running a grass track I made on my property
Keep it green
The black wheels would look good with the upgrade alloy swing arm on it.
Yes on order I ordered all the optional parts the day I preordered the rc 🤷🏻♂️still waiting on them
Earl. Great Video. In your professional opinion, does the motorcycle require a bit more maintenance after every battery pack than an RC 4 wheel vehicle? I have a motorcycle on order, so I am watching all of your content and it seems that the motorcycle requires just a bit more care after each battery pack if I want to keep the bike in good running condition. Thanks again for the informative content!
Doesn’t seem to but does kill tires quicker
Just dobyou know that plastic piece on the forks thT holds brake cable you don't snap in or out you slide the cable up first then out don't want to see you break the plastic or kink the cable friendly fyi
Be careful with those hole shots they wear down fast. When i 1st started racing 1/8 scale i went to the track at amain in chico on a hot summer day to pratice it was during the week so the track had not been waterd and i didnt think much of it well the brand new set if 1/8 buggy hole shots only lasted about 35-40 minutes. yep dumb move on my part i smoked a brand new set in about a pack and a half😢
Yes there definitely soft seems if I can get 30 minutes I’m lucky 😯
Earl, you get 50% off the already glued moto wheels, did you get those from your local hobby store? I ordered mine with the promotion code two days ago.
Yes I’ve ordered the street wheels when I preordered the rc
Can you tell me more about where you’re getting graphics made? I need some for a Snowmobile?
Local shop called sticker city but normally any car wrap shop can do custom stickers
@@earlmoorhead5555 they quoted me 200usd for 2 small decals
Damn
Should blue lock tight be used on screws after removing them even once ? Parts sure are slowly arriving, we are going to have Street tires before our bikes 😆
Probably I called around for a tire and most hobby shops haven’t seen one promoto Mx yet they seemed pretty upset
There seems to be no lock tight on the plastics I removed even the inner covers and the rear wheel has a lock nut so far I haven’t seen any lock tight but I’ve not gone into the rc that far 💯
I have taken the side rollers completely off at this point
Just to let you know amain has proline front and rear tires now in stock .
Yes I was hoping to get it locally but I might take the 7 hour drive to go visit amain shops to get them
@earlmoorhead5555 just have them shipped. And I like the white plastic I think it will look cool with the graphics on. Mine is blue and I have all of the GPM and VITAVON upgrades. In aluminum and anodized blue . And I'm going to run the #238 to represent HAIDEN DEEGAN. he's running 2nd overall in points in the motocross. And won at Washougal. In an epic race winning both motos. Stay cool .
Yes cool kids doing awesome 😎
Are the rims plastic?
Yes
I feel like the materials for the promoto mx are not that good besides the option alu parts
,for that price losi could add some alu options the platform is all plastic 😑😑😑
I see why your rear spoke bent. Try leveling out with the brake
I landed on a rock 🪨 🤷🏻♂️
@@earlmoorhead5555 ouch!!
I have a slightly bent spoke in front. Day one. Bad brakes. So I run in an area I made a large grass track
The whole shot is called an a main tire means it's only good literally in a race for the A main
Lol 😂 good to know
wheel front not enought free.
I have the brake dragging on
Purpose for better front brake function
Earl, I generally watch your channel, and appreciate your content, but I haven’t watched anything since you started making content for this stupid bike. Any idea when videos will becoming with non bike content? The thing can’t do front flips, can’t do back flips, and you can’t really upgrade the motor/esc for the thing.
I’ll be back on my xmaxx soon
Using screw gun on these makes me cringe 😬 😮