Ok……I’m getting conflicting information. I spent about an hour on the phone with a JTS gunsmith today. He strongly recommended I set the gas block at 3 for my 3” mag slugs. You just said position 1. I’m confused. I bought this gun over a year ago, straight out of the box, it ran Federal slugs(2-3/4”) no problem. Took less than 12 rounds to zero. Took it deer hunting…..1 shot, tagged out. However, the gun did jam on that one shot. Since then, it has failed to cycle 100% of the time. Per my call with JTS, I disassembled the gas block and sent pictures of the piston and spring. He said everything looked good. He instructed me to run the block at 3 and also suggested switching from Federal to Remington 3” mags. And he also said to never use any ammo that was less than 1255 FPS. I own a couple of AR’s, one is a Colt SP1 pre ban, so I know the platform as it pertains to rifles, but the shotgun version is giving me guts, and the conflicting info really muddies the water. Who’s right here…….you or JTS? Not criticizing, just trying to figure this thing out. When it does shoot, it’s deadly accurate with slugs, and super fun to shoot.
I have this runs 1200fps shot to 1600-1900 fps slugs like a clock. I did buff the rough spots out and and clean it pretty good first. One magazine never would work until I loosened/pryed it up around the top. Also lightly sanded inside of magazines, not sure it helped or if i got lucky
Mine won’t cycle at all. It is literally chewing up the brass on my 3” mag slugs(Remington). Have been in contact with JTS and they walked me through the gas settings, which I had set correctly. I’ve cleaned, lubed, you name it. I’m open to any suggestions. This is getting pretty frustrating.
Glad to hear!! Check out the clay shooting video i posted!! At the end i was busting clays with the AR12 super fun!! Thank you for supporting our channel!!
A lot of negative reviews. Because a bunch of people that have no idea what they are doing bought one because it was cheap. If you can’t understand how a gas block works. Don’t buy one. Like Brandon. So far from what I have seen. The JTS is more reliable than his AK 50. 😅
Yep mines works fine. I put 500 rounds through it and I only use high velocity 00buck and slugs. People are trying to use every kind of ammo instead of only using whats recommended. That you tuber whisper tactical told me he only uses high velocity ammo in his binelli. So he put cheap low velocity in that JTS then complained when it kept having failure to feed/ eject
I got the AK version of this. Absolutly love it. Once broke in it fires everything ive thrown in it.
I have both.
Is the AR as heavy as the AK? I know my AK seems like it weighs a ton.
@@bigbadjohnpesek9894 It seems lighter, I haven't weighed them. Definitely better for optic mounting.
That firearm is a monster
@@eternalklothgardengangsta685 it is a monster for real
Great to see you doing this Chad. Keep up the good work
Ok……I’m getting conflicting information. I spent about an hour on the phone with a JTS gunsmith today. He strongly recommended I set the gas block at 3 for my 3” mag slugs. You just said position 1. I’m confused. I bought this gun over a year ago, straight out of the box, it ran Federal slugs(2-3/4”) no problem. Took less than 12 rounds to zero. Took it deer hunting…..1 shot, tagged out. However, the gun did jam on that one shot. Since then, it has failed to cycle 100% of the time. Per my call with JTS, I disassembled the gas block and sent pictures of the piston and spring. He said everything looked good. He instructed me to run the block at 3 and also suggested switching from Federal to Remington 3” mags. And he also said to never use any ammo that was less than 1255 FPS. I own a couple of AR’s, one is a Colt SP1 pre ban, so I know the platform as it pertains to rifles, but the shotgun version is giving me guts, and the conflicting info really muddies the water. Who’s right here…….you or JTS? Not criticizing, just trying to figure this thing out. When it does shoot, it’s deadly accurate with slugs, and super fun to shoot.
I have this runs 1200fps shot to 1600-1900 fps slugs like a clock. I did buff the rough spots out and and clean it pretty good first. One magazine never would work until I loosened/pryed it up around the top. Also lightly sanded inside of magazines, not sure it helped or if i got lucky
Mine won’t cycle at all. It is literally chewing up the brass on my 3” mag slugs(Remington). Have been in contact with JTS and they walked me through the gas settings, which I had set correctly. I’ve cleaned, lubed, you name it. I’m open to any suggestions. This is getting pretty frustrating.
I have the ak12 and love it
Glad to hear!! Check out the clay shooting video i posted!! At the end i was busting clays with the AR12 super fun!! Thank you for supporting our channel!!
If you still have it I want to try it
A lot of negative reviews. Because a bunch of people that have no idea what they are doing bought one because it was cheap. If you can’t understand how a gas block works. Don’t buy one. Like Brandon. So far from what I have seen. The JTS is more reliable than his AK 50. 😅
The gas block is super important. Without adjustmebt it wont run right. I agree.
Yep mines works fine. I put 500 rounds through it and I only use high velocity 00buck and slugs. People are trying to use every kind of ammo instead of only using whats recommended. That you tuber whisper tactical told me he only uses high velocity ammo in his binelli. So he put cheap low velocity in that JTS then complained when it kept having failure to feed/ eject
We're can I get one
They're all over for sale cheap. Put it in Google.