DIY Patio Table (with Trex decking)! | Plans Available!
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- Hey everyone, this week I'm going to walk you through how I made this DIY Patio Table with matching benches for only $350! This is a super DIY-friendly project, so don't be shy!
*UPDATE*
As requested - plans are now available on my etsy page, go check them out!
www.etsy.com/l...
Be sure to check me out on Instagram @DonnyGrahamBuilds for all the behind the scenes clips/headaches. - / donnygrahambuilds
Materials List:
Treated 2x4x8s - Qty7
Treated 4x4x8s - Qty 3
Trex Decking Boards, 8 ft (toasted sand color) - Qty 9
Brown Trex Decking Screws - Qty 2 boxes
Exterior-rated Pocket Hole Screws, 1 box of 1.25" 1 box of 2.5"
Stainless Steel threaded inserts 1/4" - Qty 8
Stainless Steel washers 1/4" (1 bag)
Stainless Steel 1/4 -20, 2" bolts - Qty 8
Sherwin-Williams Black Tricon Exterior Rated Paint - 1 gl
Affiliate Links:
Outdoor string lights: amzn.to/3kd3rnz
Outdoor string light hanging kit: amzn.to/397Z9Hm
Exterior-rated Pocket Hole Screws, 1 box of 1.25" 1 box of 2.5" : amzn.to/37Z1BDg & amzn.to/39yzNGf
Stainless Steel threaded inserts 1/4" - Qty 8 : amzn.to/3yQZnkn
Stainless Steel washers 1/4" (1 bag) : amzn.to/3lo1B2M
Stainless Steel 1/4 -20, 2" bolts - Qty 8 : amzn.to/3sJxJSo
Brown Trex Decking Screws - Qty 2 boxes : amzn.to/3wsxpd0
All the music in this video can be found at:
www.epidemicso...
#PatioTable #DIY #Falltime #TrexDecking #Woodworking #OutdoorTable #DonnyGrahamBuilds
Plans are now available - check the link in the description!
After several months of struggling to get ideas and getting those ideas rejected, this is perfect for my eagle scout project I am working on! Thank you so much for this! This is actually a blessing!
Awesome, glad to hear it! Good luck man!
Could you have 45 degree cut your outside pieces so you don’t see the bottom of the Trex?
Definitely an option. But I wasn’t a big fan of the miter look for this project. Thanks for watching!
Deckorators solid core boards are less dense, more durable, retain less heat and the exposed edges would look solid not grooved. (Trex has limits)
Would look alot cleaner if it had a picture frame boarder.
This is definitely a way to go
Haha ya know, I think I’ve heard that before 😅.
Thanks for checking out the video!
Can I use 6x6 legs? Did you use PT? Do you think I can make long benches rather than 4 and have them be sturdy?
You could definitely beef it up with 6x6s. Not sure what you mean by ‘PT’. If you went the longer bench route, you’d likely need a middle support to prevent sagging.
Thanks for checking out the video!
It looks so good! You are very inspiring! 👍Will it hold to sleep on if the alcohol is too tasty?
Haha thanks man! I’ve laid on it several times and I’m about 220 lbs 👍🏽
Thanks for the video and inspiration! My wife and I made a version of this today. You don't happen to have a link for the glides/spacers you attached to the bottom of the legs? I couldn't find anything at Lowe's that seemed appropriate for outdoor use.
Thanks for checking out the build!
Unfortunately I don’t have a link, I just picked them up from my local Menards (green box store). Since Lowes failed, maybe Home Depot?
At 10:13 I see a skinny board between the wider ones on the top? I counted 6 boards across the top so where did that come from and why is it there? I am a NOVICE but want to build my own set bc the ready-made ones of resin are IMO junk. I can't go with typical type picnic as I need the seating to be open on the ends so you don't have to raise your leg to get into the table to sit down. I don't mind if they are attached vs separate benches but slide to get in.
That skinny board was used because my wife wanted a specific width for the table. You could definitely use full sized boards throughout. Plans are in the bio. Good luck!
Yessss Donny! Great work my friend!
Thanks bud, you guys should make one! Super doable, and makes for a stellar outdoor hosting space
@@donnygrahambuilds I just built a 6’ table for Sophia’s birthday party that we may convert to an outdoor table since it’s pressure treated. BUT if we don’t, I’ll be making this for sure, love doing stuff with Trex! Last year we made a 4’ planter box out of it with corner angler iron and it’s done awesome!
@@michaelallender5563 nice! Well done sir 💪🏽💯
TH-cam should recommend this high-quality DIY channel, and this video deserves more than 10 million views
Thanks ! Really appreciate that! Sharing it with friends always helps a ton!
Nice table, why not put miter cut at 45 degrees on each Conner to give it a better finish?
Simple - wife gets what the wife orders 😅.
Thanks for checking out the video!
What type of chairs do you recommend for this type of table!
Personally we really enjoy having 2 benches on one side and 3 chairs on the opposite side. Anything weather-proof would work great, we have a few of those wicker woven style ones from our local big box store. Hope that helps! Thanks for checking out the video 👍🏽
How long is this table? I am looking to build a 12' table and was curious if there were plans that work for that length, thanks!
Thanks for checking out the build! This table is just about 9’ long. There are plans linked in the video description.
I would caution going for 12’ unless you’re going to add in a 3rd middle set of legs. The trex material is too flexible for that kind run with out center supports.
Cheers!
@@donnygrahambuilds thank you so much - do you believe that these plans would be portable to make the 12' table (by 4 feet wide) if I added a third set of legs in the middle? Just having lots of difficulty trying to find design docs for that size table....thanks in advance!!
@@WizzardZero probably unlikely. All the measurements would be off.
Honestly, for what you’re trying I’d recommend 2 - 6 foot tables. Same place, easier to support and easier mobility.
@@donnygrahambuilds That's a fantastic idea and I totally agree! 2 6' tables would be much more straightforward. How would you modify your design to support a 6' table vs the 9' that you have here? just go with 2/3 of the measurements? I assume I could mitre the trex on top in the corners if I didn't want to see the scallops on the underside of the deck pieces? Thanks in advance for the guidance!
@@WizzardZero bingo! Just keep in mind the overhang you want for the table top, and size the base accordingly. Good luck on your project!
Do you have to reinforce deck to carry the extra load
Nah - standard 16 on center spacing for the deck. 2 yrs in and she’s holding up like a champ 👍🏽
Sorry, what specific fasteners do we use? How many? Care to link them? Thanks
Thanks for checking out the video!
Definitely don't apologize, I'm happy to include those links - I should have done it from the start haha. They're all linked in the video description now, thanks again!
@@donnygrahambuilds thanks. What about the Trex ones?
@@bosox2k1 Those will vary in color depending on which trex (or other composite material) you decide to use. I added a link for the ones I used though. Hope that helps!
@@donnygrahambuilds great! Yea I was seeing a box at lowes cost $96 so I wanted to see if that was what I needed, whew!
@@bosox2k1 haha yeah, those shouldn’t be that expensive. Just be sure to double check the color with your boards 👍🏽
Great build. I’m looking to do the same but I’m a newbie DIYer - is it possible to post some detailed pics of the build?
Hey! Thanks for checking out the build!
I’ve been kicking around the idea of making a set of plans for this table. If enough people express an interest, I’ll do it 👍🏽
@@donnygrahambuilds Definitely would appreciate the plans!
Plans are now available - check the link in the description!
Hey man! Please do some plans for this build! Was an awesome project
We’ll get them in my Etsy page soon, promise 👍🏽
Plans are now available - check the link in the description!
Why did you have to add the sliver?
Awesome video. Just found your channel. Congratulations on an awesome project for your fam!
Hey! Thanks so much for checking the build !
The sliver in the middle was just to get the desired width we were looking for 👍🏽
What height did you use for in the 4x4’s for the table and for the benches?
Haha working on the plans now 👍🏽
@@donnygrahambuilds sweet thanks man!
What kind of orbital sander is that? It looks lighter than mine, mine is super heavy.
It’s the Mirka Desro 6” orbital. It is super light, but also pretty spendy.
@@donnygrahambuilds cool thx!
Good job!!
Thanks!!
How do I get the plans?
My Etsy page is linked in the video description ! :)
What about the sun hitting the trex? They get HOT.
Haha they do, but with where this is positioned at our place it doesn’t get sun for too many hours of the day. Plus, we have a huge umbrella we can open up to cool it off if we’re planning to have a meal outside👍🏽
Thanks for checking out the build!
This video led me to a different video that was a little more cleaner looking
Thanks for checking out the video
Wonder why all the 2x4’s are bent all to hell be a cause people don’t restack them nicely…..
Haha maybe, but seems like they were bent before I ever got there 🤷🏽♂️. Not sure any amount of stacking will change the treated moisture content in those boards haha
Treks has no show fasteners. but still looks great.
True. I used those on my deck (shown in the last few shots of the video). But you have to use the boards with the side grooves on both sides for those to work. We weren’t a huge fan of that look. Thanks for checking out the build !
Working in fractions is so 1800's. The whole world has no idea why you guys persist.
#MERICA ;)
, @1:45 you crossed your arm over the blade. Don’t do that!!
Thanks for the heads up - gotta keep an eye on that 👍🏽
@@donnygrahambuilds I’m sorry for the negative feedback without a follow up on the project itself. Great work looks awesome!! Cool idea with composite boards. I’m not a professional by any means, Shop Safety is important. Keep posting awesome videos
@@shockjock35 no worries man, I appreciate the feedback, always looking to improve 💪🏽💯
Fxxxxxx amazing raymour & flanigan would sell this for 2599.99 all day
While I don’t approve of the language, I 100% appreciate the enthusiasm ! Thanks for checking out the video Trucker Dave!
Nice build, that treated wood has toxic chemicals, be cautious when milling and sanding bro.
Good call, appreciate the heads up!
Bro all this planning, sketching, video, and fuss and you left the edges like that🤣🤦♂️
Hahah - I know, I know. But the mrs likes the breadboard ends look more than she dislikes seeing the side of the trex board 🤷🏽♂️
@@donnygrahambuilds don't show the mrs the picture frame look or you will be rebuilding it.🤫😅
@@mikedarago6728 hahaha I actually made the exact same table for our neighbors a few months after this one, and I did theirs in the picture style. Believe it or not, she still likes the breadboard ends. I know, I’m just as surprised 🤣😅
Perfect example of someone with more money than brains!
Yikes - aggressive comment haha. What makes you say that? Any recommendations?
@@donnygrahambuilds ignore that. Douche bag trolls don't deserve replies.
Horrible sound
Appreciate the feedback - is the music coming through poorly? Or the voiceovers?
@@donnygrahambuilds voice over, the intro was fine, but the rest is so low even hooked up to auxiliary speakers on high could barely hear your voice
@@jkim72 got cha. I just got a new mic, mind watching my most recent video (accent wall) and seeing if that one is better? Super appreciate the feedback!
@@donnygrahambuilds so much better. Liked that video and also subscribed to your channel. Thanks for being responsive. I love diy channels but I normally don't subscribe, however content providers such as yourself that is willing to engage and better themselves to the audience.... damn I will support everyday... Best of luck on your channel
@@jkim72 fantastic man! Glad to hear you’re along for the ride! Thanks for the feedback!