Just purchased an older 4G Dome for my Go series system to put on my 24' Blue Wave to make those long Island runs at 0400. Looking forward to getting mine set up
Great introduction. However, it would be nice if your camera man would move the camera to your left side so when you are making changes on the screen we can actually see the whole screen. Your arm blocks most of it which at times makes it difficult to follow you and see the results of the changes you just made.
Thank you for the very informative video Just bought a B&G 20+ Wish they would include a dvd with the how to with the unit I am a total novice when it comes to radar and not much better with a Plotter.
We're happy you enjoyed the webinar. Follow the link to find more information and troubleshooting steps on our B&G radar. www.bandg.com/help--support/?stStep=007;G;f:013,1cd2c132-8d42-41aa-b254-0ae2828b1120,2c76d799-c9e5-40f8-8dde-295445bd4bb4;v:product,bg;v:region,us
hello there, i have a problem on my Simrad radar 4g. please help, loook like the radar is working good but the red marks show jetties, boats, land, bouys dont show on my fish finder anymore, It is really hard for me to go fishing at night. can't see anything on my radar. would you give me some tips? thank you
My biggest issue right now with bird mode, and even in custom, is objects on the screen show up for a split second, then disappear on the next revolution of the radar. Why is this? It makes it impossible to use the radar efficiently.
@@simrad-yachting will do! It happens in all conditions yes. And it’s not even rough when we go. Max 2 footers on a 27 foot boat. But even happens on a flat calm day.
In watching the numerous videos regarding bird mode lately (Garmin, Raymarine, and Simrad radar systems), many refer to the disappearing objects on the screen as birds diving in the water, feeding on baitfish. The radar cannot detect them once they enter the water so they are constantly disappearing and reappearing. I can't attest to this as I am still researching so I can buy my own system but hope this helps.
Just installed my halo 20+ For some reason it works I think but when I check the setting in networks it shows no connection Also on error code it’s shows none what am I doing wrong ?
I have just installed a Halo 20+ radar dome and connected it to a Zeus3 MFD. The Zeus is connected via an NMEA 0183 to navigation data including a 10 Hz fast heading compass. The radar works but will not track MARPA targets. Chart radar overlay works fine. The Zeus publishes the heading data on its wifi network. The radar status screen says "Radar Overlay status OK" "Target Tracking Status Heading not connected to radar" "Heading on radar No" "Heading on network Valid" "GPS on Network Valid" "Error codes None" How can I get the Radar to see the heading data? I assume it is meant to get it from the Zeus since it is its only connection.
We think there might be some source issue. Please make sure that compass source in the nmea2000 source selection is properly set as "zeus3 nmea0183". Please contact our support team at support@bandg.com
Just purchased an older 4G Dome for my Go series system to put on my 24' Blue Wave to make those long Island runs at 0400. Looking forward to getting mine set up
How to check the magnetron hours
Great introduction. However, it would be nice if your camera man would move the camera to your left side so when you are making changes on the screen we can actually see the whole screen. Your arm blocks most of it which at times makes it difficult to follow you and see the results of the changes you just made.
They do not want you to see everything lol. They have to make some money 💰
Thank you for the very informative video Just bought a B&G 20+ Wish they would include a dvd with the how to with the unit I am a total novice when it comes to radar and not much better with a Plotter.
We're happy you enjoyed the webinar. Follow the link to find more information and troubleshooting steps on our B&G radar.
www.bandg.com/help--support/?stStep=007;G;f:013,1cd2c132-8d42-41aa-b254-0ae2828b1120,2c76d799-c9e5-40f8-8dde-295445bd4bb4;v:product,bg;v:region,us
Very pleased with this video, txs for that but please keep in mind your hand is too much in the way so we can''t see anything :-)
Good video to help describe and define some of the terms. However, I am hoping you will show something soon on how to use the new Zone Track feature.
We'll sure make new videos soon.
hello there, i have a problem on my Simrad radar 4g. please help, loook like the radar is working good but the red marks show jetties, boats, land, bouys dont show on my fish finder anymore, It is really hard for me to go fishing at night. can't see anything on my radar. would you give me some tips? thank you
Please send us a message via FB with some pictures of the issue you're referring to. Also send us your unit's serial number and your contact details.
My biggest issue right now with bird mode, and even in custom, is objects on the screen show up for a split second, then disappear on the next revolution of the radar. Why is this? It makes it impossible to use the radar efficiently.
Does this happen in all conditions? Please, send us a message on Facebook with a video and a full list of the devices on your network.
@@simrad-yachting will do! It happens in all conditions yes. And it’s not even rough when we go. Max 2 footers on a 27 foot boat. But even happens on a flat calm day.
In watching the numerous videos regarding bird mode lately (Garmin, Raymarine, and Simrad radar systems), many refer to the disappearing objects on the screen as birds diving in the water, feeding on baitfish. The radar cannot detect them once they enter the water so they are constantly disappearing and reappearing. I can't attest to this as I am still researching so I can buy my own system but hope this helps.
Just installed my halo 20+
For some reason it works I think but when I check the setting in networks it shows no connection
Also on error code it’s shows none what am I doing wrong ?
Please send us a message via FB with your unit's serial number and a pictures of the error message.
I have just installed a Halo 20+ radar dome and connected it to a Zeus3 MFD. The Zeus is connected via an NMEA 0183 to navigation data including a 10 Hz fast heading compass. The radar works but will not track MARPA targets. Chart radar overlay works fine. The Zeus publishes the heading data on its wifi network.
The radar status screen says
"Radar Overlay status OK"
"Target Tracking Status Heading not connected to radar"
"Heading on radar No"
"Heading on network Valid"
"GPS on Network Valid"
"Error codes None"
How can I get the Radar to see the heading data?
I assume it is meant to get it from the Zeus since it is its only connection.
We think there might be some source issue. Please make sure that compass source in the nmea2000 source selection is properly set as "zeus3 nmea0183". Please contact our support team at support@bandg.com
If you mean System/Network/Sources/Compass , It is set to : Zeus3 9 NMEA0183 Port 1 [119628572]
yes, that's the one. Please contact our service department at support@bandg.com
So, is this the Halo20, the Halo20+, or the Halo24?
Ah yes, at 48:15, it shows "Halo24" on the Simrad.
Notice on the top left side, you do see the name of the radar, in this case the Halo24
What is that sine wave thing in the data bar? Is that a where am I in this tide cycle data element? I'm not able to find that on my B&G Zeus 9.
Yes, it's the tide data. I think it's exclusive to the NSS Evo3S at this time, but I could definitely be wrong.