Dude you are dead on about the exhaust robing power , cutting all that length out down to a 13 inch long at 5 inches open is so right to pick up more power
Smallest Pushrod V8 GM made from 1999+ , big turbo, id combo turbo it or supercharger feeding a turbo. Check out the GM Atlas 2800, 2900, 3500, 3700, 4200, stuff it in a mitsu/suby/nissan/honda/mazda/toyota or the luxury variants, or german cars lol
O2 sensor not picking up the rich condition when boost was blowing the candles out? You mentioned you looked at the logs. Figured something would show up, but maybe the sensor location is making it very inaccurate.
@@HorsepowerDepot wow nice work. I look forward to seeing more of this car and set up. I run a 3.27 in mine just about the same set up and turbo in a Fox.
Let us know how that works out for you in the reliability department... And no bullshitting. I've been there, and done that, with stock bottom-end 4.8's and they don't last too long before they scatter at those power levels. The reality is, yep, one can post big numbers to the internet with one, but it's not going to last like a proper built bottom end will. Good luck with it either way, 1000h.p. is still impressive, whether it lasts or not.
This 4.8 has been in this car since 2017 it’s never missed a beat. Tune up has everything to do with why it lasts. A bad tune is why 95 percent of other stock bottom ends blow up.
Any kind of turbo cam, a good set of springs, a smaller sized turbo, and a good tuner and you’ll be good. Too many people get caught up in having a perfect setup and spend way too much money. You’ll be killing your 4l60 about every 2 minutes though lol.
I don’t remember if we did the rings in this engine or not. This car was put together 4 years ago. But I know I’ve made this kind of power in another car with the same turbo with untouched rings in a 4.8 and a 5.3.
Eric Burns broke bastard racing that's an awesome car man sleepy little sleepy little car hey nines and a quarter mile and you're going to make it faster why not holla if you hear me
Just try buying 400 dollar engine from a junk yard .Lucky if it not seized up let alone capability of making 1000 HP. Winning the lottery more realistic. What a load of Shit.
@@HorsepowerDepot Don't mind me ,Still bitter about an Aero Star wrecker engine we left to the shop lacky to install. 3 weeks of him dicking around and everything hooked up , He could not get converter bolts in . Engine was seized. Our fault for the lack of Oversight I guess.
Lets see it make 1200hp!!!! Keep up the GREAT WORK!!
I LOVE THE IDLE!!!! IT SOUNDS SOO BADASS!!!
Just discovered you guys... holy man these videos are wicked awesome. Great job.
Thanks a lot! A lot of cool stuff on TH-cam it’s hard to stand out!
Hub dynos . Mans best friend
I love the Chevy bow tie you have in front of the grill
These 4.8 engines are bullet proof
At reasonable power levels, they are.
Dude, that hugger orange 4th gen, is
Nasty, and very rare, I'm so happy it's in good hands...thank you, GM 4 LIFE
The swelling in the TB coupling at @16:15 holding for hes Life.
We were waiting for it to explode! Lol
Love the car and video, please we need more boost!!! You guys are very humble 💪💪 keep up the hard work.
Great job Guys, love the work you do on your cars! Great videos love to watch, I am your biggest fan!
Dude you are dead on about the exhaust robing power , cutting all that length out down to a 13 inch long at 5 inches open is so right to pick up more power
Glad I found this channel. Great video. This channel will get pretty big i bet!!
GREAT VIDEO!!!! I LOVE DIRT-CHEAP BUILDS.
God thats a massive turbo. Makes the stock Mitsubishi TD04 13c on my car look like a fidget spinner lol.
Smallest Pushrod V8 GM made from 1999+ , big turbo, id combo turbo it or supercharger feeding a turbo.
Check out the GM Atlas 2800, 2900, 3500, 3700, 4200, stuff it in a mitsu/suby/nissan/honda/mazda/toyota or the luxury variants, or german cars lol
Great job on the videos! I am your second biggest fan!
U guys. Rock. U're. Amazing that. Was. F ing great keep. It. Rocking. U're fearless. Love it
Just found this channel. Great stuff. Just subscribed
Show us more of the Datsun 1200 coupe!!!!!
We’ve got a couple videos on it on our channel. We’re waiting on parts to show for up to make more videos.
Awesome car and video too. Thanks. I was wondering about the parts list too for this.
We’re going to go further into detail on the next video. We weren’t expecting this one to be as popular as it was!
the dyno shot made me think that!
Just saw you on FB. Had to check this out. Nice job Bro! That LTD is sick. Subbed!!!
Thanks!
Do you have a build sheet for this ? Also just amazing it's a perfect sleeper 👌
We do not. Had no idea the video was going to be such a hit. We will go over everything more in the next video we post of the car!
Love that flame 🔥
That orange Camaro is gorgeous
Check out our other videos. We had the orange 69 on the dyno and made 700hp naturally aspirated!
Subbed most underrated channel building my fairmont
You guys are awesome building that car
Just found your channel this is awesome. SUBSCRIBED (:
me too
This car a severe identity crisis and I love it!
1,052 horsepower will the s485 turbo charger you guys are sick I like you keep up the good work holla if you hear me
Bad ass!!! Have a similar combo ly2 4.8 f.i. s485 96mm turbine. What cam is in it. Bout to hit the dyno soon. Been 5.62@125 on 25lbs.
That’s awesome! It has a ljms stage 2 cam.
Sick! Ring gap?
Came here to ask
Im asking what gap?
That's badass
O2 sensor not picking up the rich condition when boost was blowing the candles out? You mentioned you looked at the logs. Figured something would show up, but maybe the sensor location is making it very inaccurate.
What valve springs are in it ? Also what cam ?
What's your ring gap at or did I miss that.
Type if other than stock: Max rpm , max rocker lift, pushrod length?
Nice grocery getter 💯
5:01 🤣 made me laugh
How long did this build last?
at 11:38 did that car spark when starting it
Any info on what camshaft u guys running
Ljms stage 2. Same as a btr stage 2 cam.
So what I took from this video this set up or even lower boost will be reliable enough to not blow but still whoop ass? 😅
For some reason I can't find your build thread... Do you have one? Please post link!
We don’t have a build thread but send us a message on IG or Facebook if you have any questions.
@@HorsepowerDepot Has the shortblock been apart? I could not remember what you guys said.
Has the motor been pulled apart and rings gapped? Anything?
Probably has been, I know Richard holdener does it to keep it from failure
How much boost can a stock Gen 4 4.8L with NO ring gap handle?
30+ all day long. We’ve done it on multiple engines. Most people break ringlands due to timing.
@@HorsepowerDepot thanks, good info to know
Are you blowing through the converter?
Gen 3 or Gen 4 4.8??
Makin some jam 👌💪🔥
Nice job guys... New subscriber !
Thanks!
Im building a 1987 Z28 with a 6.0 LS... I hope to make 1200 hp with the 67. 64 turbo... We'll see
What rear gear is in it? It comes up really nice!
3.23 rear gear
@@HorsepowerDepot wow nice work. I look forward to seeing more of this car and set up. I run a 3.27 in mine just about the same set up and turbo in a Fox.
I need recipe for a 4.8 daily driver with lil bit of power.
Simple. Add turbo.
Man that 69 camaro would go great with my hugger orange 99 as well.
Check out our other videos. The orange 69 made 700 to the wheels with stock exhaust manifolds, full exhaust and naturally aspirated!
Let us know how that works out for you in the reliability department... And no bullshitting. I've been there, and done that, with stock bottom-end 4.8's and they don't last too long before they scatter at those power levels. The reality is, yep, one can post big numbers to the internet with one, but it's not going to last like a proper built bottom end will. Good luck with it either way, 1000h.p. is still impressive, whether it lasts or not.
This 4.8 has been in this car since 2017 it’s never missed a beat. Tune up has everything to do with why it lasts. A bad tune is why 95 percent of other stock bottom ends blow up.
@@HorsepowerDepot Its been making over a thousand horsepower since 2017??
It’s made over 900 since 2017.
@@HorsepowerDepot 900 I can believe. Over 1000 on a stock bottom end is a time bomb.
@@davelowets Gen 4 rods and gapped rings handle 1k for a bit man
It's not straight out of the junkyard because I'm willing to bet heads been pulled rings were gapped and that's not the stock cam or valve springs
Cry me a river
Gen 3 4.8 ? What cam & any other engine stuff?
Gen 3.5 24x crank with gen 4 internals. Came in 04-06 trucks. We should have a video real soon with more details.
What cam are you running and what kind of fuel? Im running an identical setup in my Colorado and this gives me hope!
Ljms stage 2 cam and pump e85. We should have a video in the next few days explaining everything about the car
How was the boost pressure compared to the smaller turbo?
Little more boost 32 vs 27. But way less timing. Trying to keep the stock rods happy.
@@HorsepowerDepot can't see the rods lasting at 1200 go let alone 1000. Are you guys going to race it ?
Or is it going to be a dyno/TH-cam queen ?
What did it make on 20psi, what is the timing at?
It made 899 on 25 psi. Timing was probably around 15 deg on 25 psi.
Yes
What intercooler?
Vs racing 4 inch air to air
Jerry this is grandma. Granny $ cuzin lol I know this car makes u miss the stabbin wagon
@Mr. 6 liter I got my 4” from on 3 for around 350
Would you sell the on3 turbo?
It’s going on a friends car. On3 sells them for like $550. Vs racing also sells great turbos for cheap. Look up turbo4less.com
@@HorsepowerDepot What is the cost of the new one?
Hey I’m wondering what’s sort of motor mounts did you guys use on this swap?
It has a Team Z k member with their mounts.
LOL Hood stack on a "sleeper"?
Dam whos datsun 1200 😍😍😍
Ours! Check out our other videos we’ve done a couple on the Datsun.
What’s the motor build prior to turbo?
No sir. Engine has all stock bearings, stock rods, stock pistons, and a stock crankshaft.
@@HorsepowerDepot I’m considering building a Tahoe with a 4.8 just doing cam and springs and turbo. Any tips? This will be my first “build”.
Any kind of turbo cam, a good set of springs, a smaller sized turbo, and a good tuner and you’ll be good. Too many people get caught up in having a perfect setup and spend way too much money. You’ll be killing your 4l60 about every 2 minutes though lol.
@@HorsepowerDepot Stock untouched rings?
I don’t remember if we did the rings in this engine or not. This car was put together 4 years ago. But I know I’ve made this kind of power in another car with the same turbo with untouched rings in a 4.8 and a 5.3.
What intake is on it?
Ls6
on 210s and a good pump i can't see why u can't make 1200whp+
We’re going to try!
Seems as if you guys got the 💰
We need to see some burnouts with it now!
The foot of snow we have has put a stop to burnouts for a few weeks lol.
Is that what you told you bf 😬😂
He never did answer that question...
@@HorsepowerDepot interesting🤔.......
Eric Burns broke bastard racing that's an awesome car man sleepy little sleepy little car hey nines and a quarter mile and you're going to make it faster why not holla if you hear me
400$ block, 5400$ Worth of shit on it.. plus driveline .. paint a turd gold, then you got some expensive shiny shit
$400? Why? You could of went to 7-11 bought a Slurpee n got a free LS.😂
On my way to 7-11 right now!
Ltd > Camaro
Just try buying 400 dollar engine from a junk yard .Lucky if it not seized up let alone capability of making 1000 HP.
Winning the lottery more realistic.
What a load of Shit.
This one was locked up when we bought it 4 years ago. And it made over 1000 horsepower. Welcome to the page! Don’t forget to subscribe!
@@HorsepowerDepot Don't mind me ,Still bitter about an Aero Star wrecker engine we left to the shop lacky to install.
3 weeks of him dicking around and everything hooked up , He could not get converter bolts in . Engine was seized.
Our fault for the lack of Oversight I guess.
everybody knows completely stock will though the rods at 750-800 hp
This engine is stock and been making more than 800 for 4 years.
On3 kits have been trash, every single one we installed. We will never buy that junk again
Im a on3 fan it this combo still made 927 hp dont look like trash
@@alejandrocasarez1977fanboy 🤓
Fuuuuuuuuuuck