It costs a little more to have a pre-spooled line, but when you're in the middle of a trimming job th-cam.com/users/postUgkx429xwEjNPnwzQohFrURRyKF51YfOD_Du , it is so nice to just pop out the old one and pop in a new one. Love Black & Decker tools. Especially the 20-volt battery operated ones. And, as usual, it came on time. Thanks Amazon!
Thanks for this video. It took any hesitation that I had out of converting my Echo GT-225 string trimmer head to the Echo 400 speed feed head. My trimmer was purchased in 2017 and was just a little different when the trimmer head was taken off than the Echo version Gt-225 n the demo, but the video was presented so clearly that all the tips included here were a perfect help. Thanks again.
I'm so glad I found this video. I just got one of these heads and was trying to figure out the installation. After watching your video I had it on in about two minutes and it works amazing!
The instruction manual that came with the trimmer and the 400 speed feed head wasn't even close to being useful in changing to the speed head. This video showed how to install the white adapter with a step by step demonstration. Excellent!!
I just bought a gt-225 today along with the speed feed spool. I knew that annoying stupid stock POS wasn't going to work. Got it all home and soon found out the directions are garbage. You're video saved me a ton of frustration and disappointment. Thank you sir!
Thank you! Took me almost an hour to figure out that I needed to use the white adapter instead of the black one that is preinstalled. You saved me with this video! If you have a GT-225 Echo weed eater, this is the video to watch 👍
Thanks for the tutorial on how to replace the head. The one that came with it wastes so much time! Great tips on pivoting the trimmer for edging! Thank you for those as well!
Good job! Next week will be putting speed loader on my gt-225i, and will use your video as a how-to guide. Have read that Echo written instructions leave a lot to be desired, so your vid is most welcome!
Had no idea this was possible, my gt 225 has been sitting in the barn for a year...replaced it with an srm 225 with a speed feed head, long story short someone was weedeating and lost spring that goes inside the cap so now you have to feed the string manually, ended up ordering a new speed feed head that comes with an extra spring...going to put the new head on the gt and put the spring in the srm head so it will feed string when I bump it!
Thank You! I just used my GT 225 today and three minutes in I was out of line😂. And thanks to you I should be the first one at the Hardware store in the morning! Great Video
I was going to get a new trimmer because I hate the stupid head on this gt-225 model, but might give this a shot before I spend hundreds on a new trimmer. Thanks for this video. Excellent work!
Thank you, Bearded One, I did the swap on a GT-225 with ease thanks to your clear instructions. Echo's instructions that are included are NOT very clear. Good luck to you.
I bought this weed eater a month ago. If i used it longer than 30 minutes it would die and overheat. Took it back within my one month warranty and exchanged it for one way more powerful. Found a used 4 step upgrade at the same store, used once, already had the speed feed head on it. It was a friend of mine at the store and gave it to me for the same price. I really really lucked out. Just wanted to share that if you plan to use this unit for longer than 30 minutes, it will get hot and die and not start till it cools off. I thought it would be stronger than that, but i was even told by my guy at the store that this one just isn't very powerful and will probably act up if i use it in lawn care. The speed feed head is a game changer guys!
I only use this one for quick line trimming. Its light duty for quick jobs and saves the body from using heavier trimmer. I've burned one out cutting tall, thick weeds too. For heavy duty use, I have the Echo SRM266. It's a very good trimmer, just heavier.
@@cheaperthandirtvideos1 I use the SRM 225 and i've put it through it's paces in my lawn care business and so far it's holding up strong and mighty durable.
When you're measuring the new line, the top half of your body is off-camera, so we can't see what "arm's length" means. Do you mean arm stretched over your heat?
I found that this Trimmer head adapter size is 10mm x 1.25mm LHF, Diameter is 3-3/4 inch. You are swapping to a white color head and there are bags of screws. Will this extra screws allow fitting different brand trimmer? Say mine is a Kazz with M8 screw.
Same question, although I believe the answer is no to the metal blade. I am pretty sure it needs to be on the straight trimmers. Please let me know if you have found a safe option though. I love a blade for some heavy brush that I have.
I've been using the stock head for ten years with no problem. I'm still on the first tube of pre cut wire. It breaks or wears out occasionally but it only takes a few seconds to replace. I've used those auto feeders before and never found one worth a damn.
I have a 27 year old Echo 225 that came with a bump feed head. . I replaced that head with the one that now comes with the GT225 on mine about 20 years ago. I will never go back to the annoying bump feed head.
I had to laugh because in typical guy fashion you immediately used box cutter to open when in fact this is one of the few plastic containers that actually pulls apart at the tabs.
It costs a little more to have a pre-spooled line, but when you're in the middle of a trimming job th-cam.com/users/postUgkx429xwEjNPnwzQohFrURRyKF51YfOD_Du , it is so nice to just pop out the old one and pop in a new one. Love Black & Decker tools. Especially the 20-volt battery operated ones. And, as usual, it came on time. Thanks Amazon!
Thanks for this video. It took any hesitation that I had out of converting my Echo GT-225 string trimmer head to the Echo 400 speed feed head. My trimmer was purchased in 2017 and was just a little different when the trimmer head was taken off than the Echo version Gt-225 n the demo, but the video was presented so clearly that all the tips included here were a perfect help. Thanks again.
Great to hear!
I'm so glad I found this video. I just got one of these heads and was trying to figure out the installation. After watching your video I had it on in about two minutes and it works amazing!
The instruction manual that came with the trimmer and the 400 speed feed head wasn't even close to being useful in changing to the speed head. This video showed how to install the white adapter with a step by step demonstration. Excellent!!
Thanks,
I just bought a gt-225 today along with the speed feed spool. I knew that annoying stupid stock POS wasn't going to work.
Got it all home and soon found out the directions are garbage.
You're video saved me a ton of frustration and disappointment.
Thank you sir!
Thank you! Took me almost an hour to figure out that I needed to use the white adapter instead of the black one that is preinstalled. You saved me with this video! If you have a GT-225 Echo weed eater, this is the video to watch 👍
Thanks! I just bought the Echo and I wish I would have watched this video first! Now I need the speed feed!
He taped it on 14:19 for feed
Thanks for the tutorial on how to replace the head. The one that came with it wastes so much time! Great tips on pivoting the trimmer for edging! Thank you for those as well!
Just bought a GT-225 and you’re a lifesaver! Thank you!
Thank you so much for this video!!!!! It helped me immensely!! The instructions that come with the speed feed are such crap. Thanks again!!
Excellent video, and JUST what I needed. Will be ordering the Speed Feed and the extra line asap. btw - you trim about FIVE TIMES faster than I do!!
Thanks man, I just changed the head on my gt-225. Been using that annoying stock head all summer
Good job! Next week will be putting speed loader on my gt-225i, and will use your video as a how-to guide. Have read that Echo written instructions leave a lot to be desired, so your vid is most welcome!
Had no idea this was possible, my gt 225 has been sitting in the barn for a year...replaced it with an srm 225 with a speed feed head, long story short someone was weedeating and lost spring that goes inside the cap so now you have to feed the string manually, ended up ordering a new speed feed head that comes with an extra spring...going to put the new head on the gt and put the spring in the srm head so it will feed string when I bump it!
Cool!
Good video. I've got the same one. Had it for three years now and it works great. Just did the first tune up kit on it, super easy and runs like New.
Thank You! I just used my GT 225 today and three minutes in I was out of line😂. And thanks to you I should be the first one at the Hardware store in the morning! Great Video
YOU ARE The Life Saver! Especially after reading others comments: Thanks So & please keep vids coming!!
Thanks, will do!
Excellent video, easily understood, good film crew.
Just changed out the head and works like a champ!!! Thanks for the tips :)
Great to show the demo of the trimming!
I was going to get a new trimmer because I hate the stupid head on this gt-225 model, but might give this a shot before I spend hundreds on a new trimmer. Thanks for this video. Excellent work!
did it become the long term solution? I just bought mine and thinking about taking it back.
@@christian4935 yup worked like a charm. I use the black echo line and it works great. No need for a new trimmer anymore
Thank you, Bearded One, I did the swap on a GT-225 with ease thanks to your clear instructions. Echo's instructions that are included are NOT very clear. Good luck to you.
DAM!!! Hell Yeah!! I freakn learned something new 2day! Keep bringing the knowledge! Thank you!
Thanks. I just got one of these and the video will help with changing the head.
That head comes on all my shindawai trimmers. I usually hate improvements but that head is the best design.
I just got the same one bud appreciate it have a good Easter
This helped me out. Saved me a lot of time. Thanks
Excellent information, solved my problem... Thank You!!
Thanks for the video and helped me with the speed feed👍👍👍👍👍.
Wow how do you edge with a curved shaft, you deserve a cookie
With a Straght shaft I can edge blindfolded
I'm just better edging with a curved shaft. Straight shaft is heavy and is longer so it seams to wonder more.
Thanks for posting this, helps seeing, then doing.
Thank you for the informative video
Great demo, thank you!
Definitely gonna replace soon. Thanks for video. Bad instructions with speedfeed!!
Wow, I wish I could edge like that! (And weed wack! I’m impressed. I’m just starting out and I’m terrible at it
so on a curved head trimmer, does the the r on the spool face toward the bumpcab or toward the threaded insert????
The manual is useless so this is a big help. One question, when you put the spool back on is the R at the top or the L?
Great video!!! thank you for sharing
Dealer changed for the SpeedFeed on my new Stihl for free. It's fast but on mine the line has to be really straight to come out the other end.
Is powercare 2 stroke oil universal
So you don't have to change the default bolt in the center for the gt-225?
No.
No, It's a simple swap. The white center plastic piece is the important part for gt-225.
You’re a life saver
Such a life saving change to this Echo Speed Feed 400! I bought an extra one, just in case. :-)
I bought this weed eater a month ago. If i used it longer than 30 minutes it would die and overheat. Took it back within my one month warranty and exchanged it for one way more powerful. Found a used 4 step upgrade at the same store, used once, already had the speed feed head on it. It was a friend of mine at the store and gave it to me for the same price. I really really lucked out. Just wanted to share that if you plan to use this unit for longer than 30 minutes, it will get hot and die and not start till it cools off. I thought it would be stronger than that, but i was even told by my guy at the store that this one just isn't very powerful and will probably act up if i use it in lawn care. The speed feed head is a game changer guys!
I only use this one for quick line trimming. Its light duty for quick jobs and saves the body from using heavier trimmer. I've burned one out cutting tall, thick weeds too. For heavy duty use, I have the Echo SRM266. It's a very good trimmer, just heavier.
@@cheaperthandirtvideos1 I use the SRM 225 and i've put it through it's paces in my lawn care business and so far it's holding up strong and mighty durable.
this video is gold
Thanks!
Thanks a lot. Knowledge is power.
When you're measuring the new line, the top half of your body is off-camera, so we can't see what "arm's length" means. Do you mean arm stretched over your heat?
Oops, yes I'm stretching my arms all the way up.
FAIL- great video, I thought this would be easy, couldn’t get the original nut off, any advice on what weed wacker to buy?
nice video good work
Very helpful! Thanks!
Why do I need the white adapter? Mine does not come with one
The white adapter is for the GT-225 line trimmer. Not all line trimmer models use this adapter.
I found that this Trimmer head adapter size is 10mm x 1.25mm LHF, Diameter is 3-3/4 inch. You are swapping to a white color head and there are bags of screws. Will this extra screws allow fitting different brand trimmer? Say mine is a Kazz with M8 screw.
Does the universal head come with the correct white attachment you used?
I can confirm that it does. I purchased this after my question and it does come with it. Hope this helps someone else.
Yes
Awesome bro
The speed feeder comes standard on the srm225 correct?
yes
Great video
hi, can I install a blade kit on this echo gt 225 ? thank you
Same question, although I believe the answer is no to the metal blade. I am pretty sure it needs to be on the straight trimmers. Please let me know if you have found a safe option though. I love a blade for some heavy brush that I have.
Can you use any type of gas
Yes, you can use regular pump fuel. I prefer to use non-ethanol. Last much longer and does not attract water and burns cleaner.
Thank you for this video, your the man bro. 👍🏽
Great video, thank you! Subscribed!
Was this the universal model
Great video- thank you so much for posting!!!
Why is it one line keeps breaking ??
Can I put a blade instead of a string trimmer
Not sure, I would be careful.
Awesome sauce!
HOW MUCH DOES THE SPEEDFEED COST ???
About $30 at home depot, look on line for a cheaper.
@@cheaperthandirtvideos1 which head is the one you used? On home depot page theres 4 different ones. Could you post which one you used? Thanks
Hey so u hit tha speed feed head on the ground to make more string come out message me plz
Yes ,
I've been using the stock head for ten years with no problem. I'm still on the first tube of pre cut wire. It breaks or wears out occasionally but it only takes a few seconds to replace. I've used those auto feeders before and never found one worth a damn.
I have a 27 year old Echo 225 that came with a bump feed head. . I replaced that head with the one that now comes with the GT225 on mine about 20 years ago. I will never go back to the annoying bump feed head.
Thanks for the tutorial. I'm gonna get one. The rapid feed. sucks.
what gauge of string?
I use .105 line on all my string trimmers.
@@cheaperthandirtvideos1 Good to know. I have a good supply of .105 but was skeptical that it would work on the Echo trimmer.
I couldn't get .105 line in the Rapid Load head, but it spools up fine in the Speed Feed head and the trimmer has plenty of power to swing it.
It's an easy open package...
Good vid👍👍
You're pretty tall, maybe a straight shaft would be best for you. My back is sore from just watching. Good video!
I like the lighter weight. The straight shaft is heavy and because it's longer, it's a little harder to keep a straight line.
Alot of people ask why does Echo use those factory heads??? Its because they are making a metric shit ton of money off of selling us the speed feeds.
Agree
I had to laugh because in typical guy fashion you immediately used box cutter to open when in fact this is one of the few plastic containers that actually pulls apart at the tabs.
Yep, bull in a china shop. LOL
now get rid a that guard and ul be set
That piece of crap rapid load head that it comes with is a nightmare. I was changing the pre-cut string every couple of minutes.
That head that comes with it is worthless! I'd rather spend $20 more and have the speed feed already on it!
need to get rid of that curved shaft, it's terrible for your back.
I prefer the lighter weight of the curved shaft.
Don't buy this head from amazon..theyll send you a repackage with parts missing...All I wanna do is trim my F*ckin Yard
Damn good job