a hydrocyclone basically also you can defo scale this up and purchase a large piece of equipment called a hydroclone from some industrial machinery supplier but you may have to modify it for scale IE make the central outlet the feed etc and add a side feed for throughput or just make it custom
I have messed with some cyclone ideas before but never wanted to do stuff that people already tried so I tried a few of my own ideas a couple of years ago, with some success. I will definitely revisit that kind of system though eventually. And yeah this all should scale up, I have several plans when I can find the time to work on them. Thank you for your comment though, I enjoy hearing other people’s creative ideas and everything.
I only have one question. Do you use jetdry or some type of soap in your water to catch the ultra fine gold? I think this would be a great thing to have for catching beach gold. I live on the Pacific Northwest Coast of Oregon. There is literally tons of beach gold mixed in black and blonde sands. If you can scale this up, I truly think you are on to something great. What I like most is it wont rust or be destroyed by salt water. It doesn't weigh a ton like some of the commercial models already out on the market. So many people go for big gold and most likely they won't find it. This would allow me to get the small gold that I go for and not break my back or my bank to get it. Small gold weighs heavy when you have enough of it. Also many places won't allow you to run any gold catching tools that have an engine unless you have special permits. This is a great idea and something I want to add to my arsenal! 👍
I do use jet dry with just about every run. This would definitely work for beach sands, it might be slow for all day use but I am working on a slightly scaled up version that I ran about 60 pounds of cons in 30 minutes. The last video I uploaded shows that one. I am hoping this larger version will be good for beach sands or high volumes of crushed ore. The material has to be classified to -1/8th inch material, other than that it seems like it would be good for the beach. It should be as fast or slightly slower than existing products on the market right now but with this you should be able to fill up a 2 or 5 gallon bucket hopper full of dirt and walk away while it processes the material by itself so you dont have to constantly hand feed it. There is a ton of fine gold everywhere and with the right equipment it should end up being easier to get than the bigger stuff, thats just a guess a this point. And yeah you should be able to use it in most places. I live in California and we have the same laws but I think you can use it as long as it’s like 50 feet from a water source and you recirculate the water. Send me an email to toothpickmining@gmail.com, I can send you a prototype of the larger version to play around with. I’ll just charge the $18 shipping fee. It will be several weeks before I finalize that design but so far it seems like it will be useful in certain situations.
I replied to you on Vendettas comment but I didn’t see it until a week or so after he posted that video so I guess it didn’t notify you, so my bad man but visit toothpickmining.com/products
I apologize for the late reply but yeah that is one way for sure, the height of the discharge tube plays a role in that as well and also there are USB motor controllers that others and me have been using to control the flow.
@@activityaccounts5975 Thank you very much, it came from 6 years of trial and error trying dozens and dozens of ideas. So it definitely didn’t happen over night or anything.
Are the STL files any where to get this downloaded.. that wouldn't take long to 3d print.. it would probably cost about $2 to $4 worth of filament, I have a nice transparent blue that it would look good in... was this one made from recycled plastic from drink bottles. The black sand, a lot of it is iron, use a magnet on it to take it out.
I thought about providing the STL files but I spent so much time developing and redefining the design to create a product that I could start a business with, I am afraid of selling the STL and then having it shared for free. Although I do understand most of my customers are older and dont have 3d printers so it is definitely something I think about doing but I have some concerns to address first. I know about removing the black sands but I like to test each run without removing them to see how it does (as well with panning to challenge myself) and in some cases like in Australia, not all black sands are magnetite. From all the testing though, it seems like the black sands help to recover gold, which I know seems completely opposite from most other devices but it really does seem to help, or at least doesn’t affect the recovery rate unless you run 4 gallons or more of material. That depends on the material of course but nonetheless black sands dont usually seem to affect the recovery rate. Id be willing to do a trial type run with selling the STLs if you are up for that. No promises as there is a lot to figure out about that but I am willing to talk more about it if you are interested, email me at toothpickmining@gmail.com.
@@FrankBlackcrow Oh yeah, right now its PETG filament bought in rolls but that is the plan one day to recycle old bottles to turn into my own filament and then print my products from there
Hey Teo, yes sir, I have ran 11.3 kilos and it did a good job. I thought I made a video to share with you but I guess not. It will take an hour or less and you will probably get around 95% recovery in the first run. After the first 20 minutes or so the feed rate will slow down but as long as there is material coming out of the discharge tube then it is still processing. Another TH-camr ran his 5 gallon bucket of cons and was impressed so yeah it will run as long as there is dirt coming out of the discharge tube.
I find a squeeze bottle really helpful at rinsing out the cons container and feeder hopper
I know man I need to catch up with the times and get me one of those, all in good time though brother.
Great job getting that Au fam. Keep at it. Gold Squad Out 🤠
Yes sir lets get it haha
a hydrocyclone basically also you can defo scale this up and purchase a large piece of equipment called a hydroclone from some industrial machinery supplier but you may have to modify it for scale IE make the central outlet the feed etc and add a side feed for throughput or just make it custom
I have messed with some cyclone ideas before but never wanted to do stuff that people already tried so I tried a few of my own ideas a couple of years ago, with some success. I will definitely revisit that kind of system though eventually. And yeah this all should scale up, I have several plans when I can find the time to work on them. Thank you for your comment though, I enjoy hearing other people’s creative ideas and everything.
I only have one question.
Do you use jetdry or some type of soap in your water to catch the ultra fine gold?
I think this would be a great thing to have for catching beach gold.
I live on the Pacific Northwest Coast of Oregon. There is literally tons of beach gold mixed in black and blonde sands. If you can scale this up, I truly think you are on to something great.
What I like most is it wont rust or be destroyed by salt water. It doesn't weigh a ton like some of the commercial models already out on the market.
So many people go for big gold and most likely they won't find it. This would allow me to get the small gold that I go for and not break my back or my bank to get it. Small gold weighs heavy when you have enough of it.
Also many places won't allow you to run any gold catching tools that have an engine unless you have special permits.
This is a great idea and something I want to add to my arsenal! 👍
I do use jet dry with just about every run.
This would definitely work for beach sands, it might be slow for all day use but I am working on a slightly scaled up version that I ran about 60 pounds of cons in 30 minutes. The last video I uploaded shows that one. I am hoping this larger version will be good for beach sands or high volumes of crushed ore. The material has to be classified to -1/8th inch material, other than that it seems like it would be good for the beach.
It should be as fast or slightly slower than existing products on the market right now but with this you should be able to fill up a 2 or 5 gallon bucket hopper full of dirt and walk away while it processes the material by itself so you dont have to constantly hand feed it.
There is a ton of fine gold everywhere and with the right equipment it should end up being easier to get than the bigger stuff, thats just a guess a this point. And yeah you should be able to use it in most places. I live in California and we have the same laws but I think you can use it as long as it’s like 50 feet from a water source and you recirculate the water.
Send me an email to toothpickmining@gmail.com, I can send you a prototype of the larger version to play around with. I’ll just charge the $18 shipping fee.
It will be several weeks before I finalize that design but so far it seems like it will be useful in certain situations.
I haven't tried the Single Nano yet.
Thank you for the good advice, pal 👍🤠
Thank you sir and thank you for your support 😃
Well explained thanks. I like the look of this system. Cheers.
Thank you for your comment, it has been a journey developing it for sure.
Dude, are you making these available again? I still want to try one
I replied to you on Vendettas comment but I didn’t see it until a week or so after he posted that video so I guess it didn’t notify you, so my bad man but visit toothpickmining.com/products
I bet you can change the flow rate by lowering the pump to adjust the material retention.
I apologize for the late reply but yeah that is one way for sure, the height of the discharge tube plays a role in that as well and also there are USB motor controllers that others and me have been using to control the flow.
@@toothpickmining I did see the USBs in your other videos. Your setup is epic.
@@activityaccounts5975 Thank you very much, it came from 6 years of trial and error trying dozens and dozens of ideas. So it definitely didn’t happen over night or anything.
Are the STL files any where to get this downloaded.. that wouldn't take long to 3d print.. it would probably cost about $2 to $4 worth of filament, I have a nice transparent blue that it would look good in... was this one made from recycled plastic from drink bottles.
The black sand, a lot of it is iron, use a magnet on it to take it out.
I thought about providing the STL files but I spent so much time developing and redefining the design to create a product that I could start a business with, I am afraid of selling the STL and then having it shared for free. Although I do understand most of my customers are older and dont have 3d printers so it is definitely something I think about doing but I have some concerns to address first.
I know about removing the black sands but I like to test each run without removing them to see how it does (as well with panning to challenge myself) and in some cases like in Australia, not all black sands are magnetite. From all the testing though, it seems like the black sands help to recover gold, which I know seems completely opposite from most other devices but it really does seem to help, or at least doesn’t affect the recovery rate unless you run 4 gallons or more of material. That depends on the material of course but nonetheless black sands dont usually seem to affect the recovery rate. Id be willing to do a trial type run with selling the STLs if you are up for that. No promises as there is a lot to figure out about that but I am willing to talk more about it if you are interested, email me at toothpickmining@gmail.com.
@@FrankBlackcrow Oh yeah, right now its PETG filament bought in rolls but that is the plan one day to recycle old bottles to turn into my own filament and then print my products from there
How much sand can it process at a time? Can I run 10 kg of sand through it and trap all the gold that was in it? :)
Hey Teo, yes sir, I have ran 11.3 kilos and it did a good job. I thought I made a video to share with you but I guess not. It will take an hour or less and you will probably get around 95% recovery in the first run. After the first 20 minutes or so the feed rate will slow down but as long as there is material coming out of the discharge tube then it is still processing. Another TH-camr ran his 5 gallon bucket of cons and was impressed so yeah it will run as long as there is dirt coming out of the discharge tube.
Surfactant is necessary.
can you use it to make hash oil?
Not really but it sure looks like you could use it for those purposes lol
thats a different type of apparatus called a soxhlet extractor
👍👍❤
interesting but i can hand pan a lot faster.
Um ok, thank you for letting me know lol