A teensy bit iffy on the red white and blue, but i'm sure it'd look a LOT better with some graphics! Nicely done on this, makes me wish my Crown Vic P71 wasn't in the shops atm XD
If you don't want to have a pile of dust to clean up after sanding, look into Clayton Associates. Their entire business is preventing, removing, and containing dust from paint, abraisives, and cleaning.
What type of rims did you guys run? What's the back spacing and such. I have a 03' P71 and a 08' P71 Police Interceptors. I haven't seen any wheels I like. Those I do. Nice build guys. I DO LIKE IT ALOT.
It seems that the speed is getting higher when driving on the circuit, but it didn't look like it was too early because of the coloring. w （サーキット走行でスピードが出てるみたいなのですが、カラーリングの為に早そうには見えませんでした。ｗ）
Would you guys be willing to take out the emergency lights around the center brake light & send them my way. I'm able to use them as a volunteer Firefighter.
Wish me the best I want a crown vic bad but based off th insurance ion don't think I'll be able to get one without th price being crazy asf 300k miles plus still want 3to 5k for thm
@@MrUnforgiven765 I know right, been in that situation.. it can be made to work but the MAF is smaller than the 80mm stock MAF so I don't see why swap to a smaller one 🤔.. I'd make the 80mm work tho..
@@P71ScrewHead without computer tuning the FIPK from K&N will not work on a P71 with the DBW throttle body. K&N even warns you on the package not to install this on a P71.
I hate it when a former police car with battering ram, spotlights and strange antennas comes down the road and I panic slow down only to see some scabbed up tattooed tweaker driving it. Why don't they remove all the police equipment before they distribute these cars to tweakers? I don't get it.
Most municipalities have to remove as much as possible before it is auctioned off. Most don't care enough to actually do it. They make it the responsibility of the new owner.
Watch part 1: th-cam.com/video/cWyXcUfPDQA/w-d-xo.html
cleetus sure has made an impression.
In the car community and the market prices lol
I was thinking the same lol
Guy a total loser that's not even his real name
🤣
Yes i have now bought a crown vic and i have no idea why lol
Sweet! I've followed all your videos on this Panther Platform Performer. Very fun and informative.
Now we need to see it in an actual race!
Looks like good times were had by all
Hmmmm.....air grinder on fiberglass, 8 inches away from face and no safety glasses. Right on brotha!!
Best inexpensive cars, I beat the hell out of my crown vic's for years
@powernation and @carass - thank u for making cool crazy things
My 05 Gran marquis rocks.
It's a lot easier using a plaster's brush to apply the gel coat to the fiberglass that way you can brush it to desired thickness.
I was able to hang out with Jeremy and Jimmy at the Power Nationals. Very cool.
Sounds really good!
Nice. Who's the drone pilot?
A teensy bit iffy on the red white and blue, but i'm sure it'd look a LOT better with some graphics! Nicely done on this, makes me wish my Crown Vic P71 wasn't in the shops atm XD
If you don't want to have a pile of dust to clean up after sanding, look into Clayton Associates. Their entire business is preventing, removing, and containing dust from paint, abraisives, and cleaning.
Should have done a double x pipe, shorty headers, ford racing intake manifold.
How could you not test it at the Freedom Factory?
Cuz Cleetus would be likely to wreck it like all the other Vics that make their way there.
🤣
A "Whoooptie".
Going off topic, a 4.2L Chevy inline 6 with all the accessories in an early chevy 210
Now I know what I'm going to do with my Marquis.
Nice my grandma had one of those
Glad to see you guys got the vicc to a track. You guys still want some chease curds?
love the car where can it race in Kentucky ??
Rocket Pop
What type of rims did you guys run? What's the back spacing and such. I have a 03' P71 and a 08' P71 Police Interceptors. I haven't seen any wheels I like. Those I do. Nice build guys. I DO LIKE IT ALOT.
On the '08 I've run a few sets of 19x9.5 +35 et and they fit great.
Great thank you!!!
Wish you guys went with a muscle car look.
It seems that the speed is getting higher when driving on the circuit, but it didn't look like it was too early because of the coloring. w
（サーキット走行でスピードが出てるみたいなのですが、カラーリングの為に早そうには見えませんでした。ｗ）
There are rumors that the stock intake performs better than a cai can you guys put it to rest on and off dyno
Would you guys be willing to take out the emergency lights around the center brake light & send them my way. I'm able to use them as a volunteer Firefighter.
Yayy 🥰😻👌🔥
What year Interceptor is this?
Well, at least they have the race jargon down.
Now let's go for 10 years of race experience to actually make any dent.
Looks like it was wrecked and hoge poged together with junkyard fenders.
Kind of like Dolly Parton's coat. Well they are in Tennessee.
Strip the interior except the dash and front seats
Cold Air Intake doesn't really improve over the police airbox.
Cold air intakes for the Vic are the same size just a more direct pipe. I actually felt the panel filter was worse than the OEM paper
I love your ford crown victoria 👍what year is ford crown Victoria Is
05+..
Ouch. That K&N CAI is a downgrade. The MAF is 70mm where the stock was 80mm. AFE Makes a proper 80mm setup though.
Wish me the best I want a crown vic bad but based off th insurance ion don't think I'll be able to get one without th price being crazy asf 300k miles plus still want 3to 5k for thm
If youre getting a CV for 300k miles with 3-5k you are being scammed. I got mine 95k 9k idle hours, runs flawlessly for 1,500 on FB marketplace.
👍👍🇺🇲
Let's go Brandon
Brandon is on the other show.
You guys should install a siren controller since it still has the speaker.
That would be illegal unfortunately
When they said turn it into "race car" I already knew. They must have plenty red and blue paint, its just as bad as the civic paint job.
So you're going to hide the CEL n tool wrench light from installing that CAI?? I guess.. Shoulda at least spoken about it..
I'm surprised it didn't go into and stay in limp mode.
@@MrUnforgiven765 I know right, been in that situation.. it can be made to work but the MAF is smaller than the 80mm stock MAF so I don't see why swap to a smaller one 🤔.. I'd make the 80mm work tho..
@@P71ScrewHead without computer tuning the FIPK from K&N will not work on a P71 with the DBW throttle body. K&N even warns you on the package not to install this on a P71.
@@MrUnforgiven765 oh I know, been through that already..lol Seems to work for a few ppl..
😁🖖👍✌👌😎
Crime paids...get smart..the criminals is the boss.
Your paint job resembles the Russian Flag a lot more than the American Flag....Doh!
The crown vic is French
somebody take away the red and blue from those guys or all projects gonna get a shitty paintjob in the end.
link up with cleetus this video is a cry for attention
🤣
I hate it when a former police car with battering ram, spotlights and strange antennas comes down the road and I panic slow down only to see some scabbed up tattooed tweaker driving it. Why don't they remove all the police equipment before they distribute these cars to tweakers? I don't get it.
🤣 🤣 🤣 🤣 🤣 🤣
Most municipalities have to remove as much as possible before it is auctioned off. Most don't care enough to actually do it. They make it the responsibility of the new owner.
It's been over 10 years since these were used by police. Why do you panic?
Neighbor better
Also carcass is the worst crew on PN
🤣
That is one ugly car.
I have no interest in anything else then mechanical repairs and mods from the shop. Gonna skip this episode
Good info. Thanks for letting us know. I've entered it into the log.
@@ce2flaco Thanks for that comment, it truly adds value. Will enter it into the log.
@@ulflarsson4294 Excellent. I'm sure it doesn't compare to the value of your post though. All the credit goes to you.
@@ce2flaco Where did you get your credits..at the toilet-store?