Son of a submariner less FF VI?!!? Excellent video man, very good. Im learning the more archaic, tedious process w eproms now and my GQ-4X, but I have to start doing this in the future.
Me too man me too. Just a heads up if you buy a PIC programmer you can buy the PIC chip for a dollar and program it yourself rather than shelling out $4 for a premade SuperCIC chip... REALLY saves on cost if you're going hard in the paint with the repros.
Thanks for the heads up man, I can use all the savings I can get believe me! That's an awesome workaround to the region/lockout chips ...looking into PIC programmer now
I have plenty of roms and emulator for Nintendo and N64 games from a to z my question is on a blank motherboard will I be able to put a single game on that motherboard using this video method? If not can somebody lead me to the right direction of video thanks
can u do this with a Retrode 2 to? I buy some snes repros from Aliexpress near all works and only one dont do work. Maybe they do a mistake and i Hope i can fix it by myself if i can get a Hardware to Connect it to the PC. can some one answere if a Retrode 2 working or not, If Not, can one send me a link, where i can buy the Hardware?
I've got repros with an outdated glitchy english translation. Can I use this to rewrite the proper updated rom? The cart pcb isn't the same as yours, but about the same size.
Most likely not, this was made for these specific carts.. I dont want to say 100% it wont work.. because I never tried but I just doubt it would and never heard of it being possible.
Thank you for the video! Quick question, is this considered emulation, Or is the gameplay quality like playing an original cart on hardware? Thank you!
No in that you're using a bonafide SNES to play them on... emulators are software that emulates hardware... since you use this on an actual SNES it is not emulation. It is weird though playing games that existed on emulators only on the SNES. For example, Secret of Mana 3 only came out in Japan but there was a really popular translation that came out that exists only on emulators. With this device it is possible to program that ROM onto the board and play it on an actual SNES.
MrG46236 These boards you cannot do multicarts unless the games were bundled that way on one rom. To do a multi cart would require different boards, multiple eproms and soldering. Ive never done so, so I cant really speak much on the process.
can you put some roms at 1 cartidge? like super mario world1+2+mario all stars? or all 3 donkey kong? then check the game from screen what you want to play?
Madlittlepixel, how many games can the SNES board carry once you had flashed it? I'd like to do a compilation of some favorites for my personal usage! I owned the original games, but I like to have them in one single cart all together! One more question, Would it be the same process that I need to follow from your video, if I choose to purchase the flasher that includes NES, SNES and FC in one flasher board!? Thanks
ChaleX S.O. the proccess is the same for the other boards. But this is not the product if you want to add more than 1 rom to the board. There may be a way to do it, but this is setup where essentially one game per board. If you want to do multi carts youd want a board that supports mulitple eproms.
I really appreciate this answer so it clarifies all for me, but do you have any suggestion where I might get a board that supports mulitple eproms, so I can attempt to do my personal compilation?
Get a printer. Print onto sticker paper. Laminate the paper with thin laminate. Cut out label with scissors. If you're fancy you can shell out money for a Silhouette portrait which grants you the ability to make sticker packs that you can easily peel the labels out of. This assumes you know your way, a bit at least, around a program like photoshop.
EXF 2008 From the notes I read with the available firmware, no. But they say it may be possible with custom firmware and software. Id not buy this with the hopes of dumping just in case. The flasher for SNES is only $20 so not bad if you are to at least flash a few games.
@@Whurlpuul its possible to do a repro of starfox 2, only it's a bit more difficult seeing as you'd need a donor cart in order to do so. i didnt really want to use a donor cart cause of it being a time consuming process that can be fucked up easily, which is why i came here seeing if it'd be possible with a large enough board. ill probably just use stunt race fx.
China is ripping you off. With your own printer you can do label, cartridge, box, inner tray insert, manual, and insert packins(posters) for ~$5-6... but I guess paying the extra is okay considering the printer cost $300
They can only attack if you use it to sell games, but I want it to back up my games and there is no law on backing up my games. you can sell them at your own risk.
The shipping on mine is taking forever!!! Ordered mine on December 2nd and.it should be arriving tomorrow.
ETA PRIME haha i see that it did arrive :P
Love to idea of flashing some physical cartridges. Great new things to learn.
Could you make your own multi-carts with this too?
Buy the flasher here www.infiniteneslives.com/kazzo.php
Hey! We need an updated version of this video! Cool as hell. Do you know if this is still available on 2024? Thnks
Son of a submariner less FF VI?!!? Excellent video man, very good. Im learning the more archaic, tedious process w eproms now and my GQ-4X, but I have to start doing this in the future.
Me too man me too. Just a heads up if you buy a PIC programmer you can buy the PIC chip for a dollar and program it yourself rather than shelling out $4 for a premade SuperCIC chip... REALLY saves on cost if you're going hard in the paint with the repros.
Thanks for the heads up man, I can use all the savings I can get believe me! That's an awesome workaround to the region/lockout chips ...looking into PIC programmer now
Totally agree about that missing line. That's why I made Ted Woolsey Uncensored Edition.
Now i understand how to make my own repro games
Thats pretty neat for the old effect of playing games
I bought this a month and I love it. Its addictive because your wish list of games gets larger. Lol. What program u use for making labels?
I use photoshop. There is a user name John Riggs who makes an amazing video on making reproduction labels.
Will this work with Pal super Nintendo’s?
Do they sell special chip boards? Like, I know Mega Man X2 and X3 require a CX4 chip to run. I would love to make a repro cart of X3.
I want to make my own repros but sadly they seem ro be out of stock for the flasher base. Am I just blind?
This was too good to pass up lol. I had to try this out, Thanks for the video MLP.
I have plenty of roms and emulator for Nintendo and N64 games from a to z my question is on a blank motherboard will I be able to put a single game on that motherboard using this video method? If not can somebody lead me to the right direction of video thanks
Wish they still made this.
Can Repros damage your console though like multi carts?
No
Whats a reproduction cartridge
Non original cartridge you flash a rom onto and the system recognizes it like it's an original cart.
Thanks
Have you tried to reuse/overwrite the boards with a new game?
Where can I get it
can u do this with a Retrode 2 to? I buy some snes repros from Aliexpress near all works and only one dont do work. Maybe they do a mistake and i Hope i can fix it by myself if i can get a Hardware to Connect it to the PC. can some one answere if a Retrode 2 working or not, If Not, can one send me a link, where i can buy the Hardware?
I've got repros with an outdated glitchy english translation. Can I use this to rewrite the proper updated rom? The cart pcb isn't the same as yours, but about the same size.
Most likely not, this was made for these specific carts.. I dont want to say 100% it wont work.. because I never tried but I just doubt it would and never heard of it being possible.
Question: Can you flash NES games onto the SNES carts and, if so, will they run properly on an SNES?
Unlikely, NES and SNES games run on two different bios
can you do so, GBA Games on a SNES cartridge?
Thank you for the video
Do you have a link to the SNES flasher sotfware ? Thanks
This is a certified 🏅 cool vid 💯😎
Thank you for the video! Quick question, is this considered emulation, Or is the gameplay quality like playing an original cart on hardware? Thank you!
No in that you're using a bonafide SNES to play them on... emulators are software that emulates hardware... since you use this on an actual SNES it is not emulation.
It is weird though playing games that existed on emulators only on the SNES. For example, Secret of Mana 3 only came out in Japan but there was a really popular translation that came out that exists only on emulators. With this device it is possible to program that ROM onto the board and play it on an actual SNES.
Like the video. I do have a question. How do I go about making a multi cart? Any advice is appreciated.
MrG46236 These boards you cannot do multicarts unless the games were bundled that way on one rom. To do a multi cart would require different boards, multiple eproms and soldering. Ive never done so, so I cant really speak much on the process.
Look into an EverDrive, lets you put roms onto an SD card and play them in a bonafide SNES.
2023 update? That site appears to be down.
can you put some roms at 1 cartidge? like super mario world1+2+mario all stars? or all 3 donkey kong? then check the game from screen what you want to play?
Xarilaos Xatzivasiliou With these boards no, you have to have a board that supports multiple eproms.
What software did you use to make the game I dont see it on here.
I think this shop is dead :'c
There a no Updates on the Website.
Or is it active?
I want this Cards and the reader/writer :/
Madlittlepixel, how many games can the SNES board carry once you had flashed it? I'd like to do a compilation of some favorites for my personal usage! I owned the original games, but I like to have them in one single cart all together!
One more question, Would it be the same process that I need to follow from your video, if I choose to purchase the flasher that includes NES, SNES and FC in one flasher board!?
Thanks
ChaleX S.O. the proccess is the same for the other boards. But this is not the product if you want to add more than 1 rom to the board. There may be a way to do it, but this is setup where essentially one game per board. If you want to do multi carts youd want a board that supports mulitple eproms.
Madlittlepixel, Thanks for answering!
I really appreciate this answer so it clarifies all for me, but do you have any suggestion where I might get a board that supports mulitple eproms, so I can attempt to do my personal compilation?
Really cool man. Where do you get the labels?
HobbsTV I made the labels.
Madlittlepixel
I gotta learn how to do that. Nice work
Get a printer. Print onto sticker paper. Laminate the paper with thin laminate. Cut out label with scissors. If you're fancy you can shell out money for a Silhouette portrait which grants you the ability to make sticker packs that you can easily peel the labels out of.
This assumes you know your way, a bit at least, around a program like photoshop.
I really enjoyed this video, I'm a new subscriber too
Do these work on the super nt ?
Programmer sold separately? Where do we get one?
James Polaniec www.infiniteneslives.com/kazzo.php
Wish you could still buy it.
yea whats the deal. im looking for a new video
Would have liked to see putting the cart together physically as well
Still sell?
Can you dump roms with these?
EXF 2008 From the notes I read with the available firmware, no. But they say it may be possible with custom firmware and software. Id not buy this with the hopes of dumping just in case. The flasher for SNES is only $20 so not bad if you are to at least flash a few games.
Cool, I was hoping I could back up my SNES carts. But this is still neat, I would love to make a Secret of Mana 2 Repro.
Just an update. The one featured in the video is no longer available. The new model they produce has the ability to dump roms.
what size chipset would i need to repro starfox 2?
You can't re-pro Starfox 2 because Starfox 2 needs a specific chip (the FX chip)
@@Whurlpuul its possible to do a repro of starfox 2, only it's a bit more difficult seeing as you'd need a donor cart in order to do so. i didnt really want to use a donor cart cause of it being a time consuming process that can be fucked up easily, which is why i came here seeing if it'd be possible with a large enough board. ill probably just use stunt race fx.
Yeah I heard that the donor cart has to be one of the 5 games that uses the Super FX chip, I've never done it before so i'm not sure though.
This looks rad, but seems they maybe went out of production. :/
Anywhere in the UK I can get these or an equivalent
Sweet!
I prefer buy Cartmod from China for 9$ with label and cartridge.
China is ripping you off. With your own printer you can do label, cartridge, box, inner tray insert, manual, and insert packins(posters) for ~$5-6... but I guess paying the extra is okay considering the printer cost $300
Cool
Mad what is your email?
Fx chip and botleg dbz final bout and hyoer dimension
Nintendo, most likely, is tracking you down at this point... good luck!
They can only attack if you use it to sell games, but I want it to back up my games and there is no law on backing up my games. you can sell them at your own risk.
lol 😂😂
"No tools required"