I love your videos, Thank you for taking the time to make these and help some of us that are getting our feet wet with this...y ahora que se que hablas Español me gustan mas todavia
Just found the channel great videos all that I have watched , do you have any videos on reading the immobilizer 2 ring on the Dodge cars 2000/2003 thanks
Hola , excelente trabajo ....una pregunta: Autel IM608 puede leer el BCM de un Dodge Charger 2011-2018 utilizando puntos de conexión en la placa ??? , saludos
Buenas noches, disculpa espero puedas ayudarme con una duda que tengo , Cuál es la diferencia entre leer D-Flash , C-Flash y C-Shadow ??? Hermano , tambien quiero mencionarte acabo de adquirir un im608pro y si pude leer el bcm de Dodge, utilize un diagrama de vvdi para hacer los puntos de conexión
in pc software at the end it says to connect to vpp2 but you are not hooked to it, wondering why? also to clone the bcm do we just copy the d flash and eeprom or do we need the c-flash , shadow and so on also? also I noticed after I followed this and part 1 on multiple Bcm's iam able to read the eeprom okay but the c,d,shadow all read as empty just all 00's noticed you had the same issue and was wondering If you ever figured out why? wouldn't think both my Bcm's are bad corrupted?? any ideas or maybe does vpp2 need to be connected?
Great questions! If the software is asking for VPP2 but you're not connected, it could be that certain operations require it for proper power or communication. As for cloning the BCM, you usually need to copy the D flash and EEPROM, but depending on the specific module, you might also need the C flash and shadow data. The empty readings you’re seeing in C, D, and shadow could indicate a few things: it’s possible that those sections are locked or not properly accessible, or you might need the VPP2 connected to read them correctly. It’s unlikely that both BCMs are bad, double-checking connections and settings!
I love your videos! Very helpful as I'm moving my locksmith business towards BCM's. Thank you!
Thank you! Showing how it works on the PC is exactly what I was hoping you would show!
I love your videos, Thank you for taking the time to make these and help some of us that are getting our feet wet with this...y ahora que se que hablas Español me gustan mas todavia
Just found the channel great videos all that I have watched , do you have any videos on reading the immobilizer 2 ring on the Dodge cars 2000/2003 thanks
Great video. Where did you get the pin outs for the ford. It’s not in the xp400.
I remove the daughter board and toned them out that's how I got to mcu to show on video
Can you show the pinout is for the Autel im608 pro. Not lapel tck,tdi,tdi,tms
Did you trace the BDM yourself? How did you discover the BDM pinout? This was the only place I could find it. Thanks!
Gracias muy bien explicado bien video felicidades desde mexico
Hola , excelente trabajo ....una pregunta: Autel IM608 puede leer el BCM de un Dodge Charger 2011-2018 utilizando puntos de conexión en la placa ??? , saludos
Creo q si hermano
Buenas noches, disculpa espero puedas ayudarme con una duda que tengo , Cuál es la diferencia entre leer D-Flash , C-Flash y C-Shadow ???
Hermano , tambien quiero mencionarte acabo de adquirir un im608pro y si pude leer el bcm de Dodge, utilize un diagrama de vvdi para hacer los puntos de conexión
EXCELENTE VIDEO!!!! GRACIAS POR COMPARTIR
can you show the clone process from a defective board to a donor one
much appreciated
in pc software at the end it says to connect to vpp2 but you are not hooked to it, wondering why? also to clone the bcm do we just copy the d flash and eeprom or do we need the c-flash , shadow and so on also? also I noticed after I followed this and part 1 on multiple Bcm's iam able to read the eeprom okay but the c,d,shadow all read as empty just all 00's noticed you had the same issue and was wondering If you ever figured out why? wouldn't think both my Bcm's are bad corrupted?? any ideas or maybe does vpp2 need to be connected?
Great questions! If the software is asking for VPP2 but you're not connected, it could be that certain operations require it for proper power or communication. As for cloning the BCM, you usually need to copy the D flash and EEPROM, but depending on the specific module, you might also need the C flash and shadow data.
The empty readings you’re seeing in C, D, and shadow could indicate a few things: it’s possible that those sections are locked or not properly accessible, or you might need the VPP2 connected to read them correctly. It’s unlikely that both BCMs are bad, double-checking connections and settings!
Does the Autel IM508 with XP400 clone a BCM as well?
Thank you very much, it's a very helpful video
Good day sir, Ford Ranger BCM MC912S pinout can you get it?
great information 👍 keep it up bro
Para clonar el bcm de un ram promaster
Exelente video en ingles y español
الله يعطيك الصحة والعافية
Its not working. Reading ID is OK same like you. But reading d-Flash and other gives all "0" , no data.On your film reading gives you zero too.
Saludos de México como supiste cuál era el número del chip que tenías que leer
Ver mis videos anteriores, ahí te explico, la numeración esta en el chip
Would you provide the pinout please
Watch complete video part 1,2, it's shows
SUPER!
Great work
Great video
Thank you
cant find part 1
Subscribe to the channel for latest videos on this
th-cam.com/video/LWcGAEpKkVc/w-d-xo.html
Can you hack a 2019 by 50 bcm copy it to a new one
If you're talking ford, yes.
What year bcm is this?
2015
@@globalcommerce7654 did you ever happen to get it to read?
Hi. Reading SPC560B64L7 ok. Writing does not work because the MCU is protected
how to clone ?
@@abis7709 reading eeprom