I will try to make one next time I have to do it. The easiest way if there is access above the ceiling is to drill thru the frame and then thru the studs into the next open stud bay and then fish a way down that bay and hook thru the hole you drilled.
Sorry Jerry, but this type of lock was designed by Schlage to be installed onto a door that swings in a pivoting motion as opposed to a linear (straight line) motion. If you wish to install an electrified lock onto a sliding door, your options are very limited. But the typical way to accomplish what you are looking to do would be to install a Maglock (on the unsecured side), and to make sure that it has a Door Position Switch (DPS) feature so that it will only energize once the sliding door is in the fully closed position. Hope this helps
Excellent attention to detail.
anybody know any videos on getting the the transfer hinge wires fished through the door frame?
I will try to make one next time I have to do it. The easiest way if there is access above the ceiling is to drill thru the frame and then thru the studs into the next open stud bay and then fish a way down that bay and hook thru the hole you drilled.
We had the spring latch pointed the wrong direction, but we flipped it around in the end after the video (10 second fix)
Thank you so much pal. You saved my life on this
Does this lock sends a signal to the main unit indicating that door is Locked or Open, as a mean to monitor the activity?
I believe they offer that as an option but you have to specifically order it that way.
Great video man. This helped a lot! It is excatly what I was looking for. Thanks for sharing.
i used Dynamic Security off and on throughout my time with different companies. I would recommend them to anyone
what happens if the door is a sliding door , will this lock work and prevent the sliding door which this lock is fitted on prevent from opening up
Sorry Jerry, but this type of lock was designed by Schlage to be installed onto a door that swings in a pivoting motion as opposed to a linear (straight line) motion. If you wish to install an electrified lock onto a sliding door, your options are very limited. But the typical way to accomplish what you are looking to do would be to install a Maglock (on the unsecured side), and to make sure that it has a Door Position Switch (DPS) feature so that it will only energize once the sliding door is in the fully closed position. Hope this helps
seems Maglock will be the last option ... Thanks for your help and advise ..