How To Setup a DNA Box Mod: Cana Strip Down, Chip Upgrade
ฝัง
- เผยแพร่เมื่อ 23 มี.ค. 2015
- In this video I will show you where to by everything wther you are stripping down your Cana Mod or old hana mod, and replacing it with any chip Evolv offers.
DNA 20
DNA 30
DNA 40
DNA 25
thank you so very much for showing us how to build a DNA 40 Mod from beginning to end, i am going to build one myself; i have been think about it an now i am going to do it from watching you. thank you so very much Vape On an keep going us all the info an safety that you have been doing
I've only been following you for the last couple of days and have learned way more through your videos compared to many other youtube vids. Thanks for taking the time to explain things so clearly! Your an inspiration to me. Thanks for being so down to earth much appreciated!
Thank you Sir, Words like your is really what keeps me going.
Great video, I've been thinking of building one myself, seeing you build one make me feel like I too can do it. Thanks man, you're the best.
Thanks very much for this video, Peg. I bookmarked this so I can use it to build my next DNA 40.
Thanks very much for this video. You are a master of soldering ;-)
Great Peg. Now even I consider to give it a try With a DNA 25. I just need to get a soldering iron an a Third arm. Thank you for a very good explanation.
tottosan i recently put together a strip own of a zero and a vapor flask, but didnt put it on video cuz i wasnt sure what i was doing.
now i am so, if anyone wants an upgrade i'm willing to do it one more time.
That would be awsome, I have a flask clone that I would love a dna 25 or 40 in. Bi\ut I don`t want you to get over Your head in work. You have done enough for a while. :) I don`t have the Money for those chips yet.. But thank you very much for the offer. :)
I built one of these a while ago. While building it I found out that 18 gauge silicone wire wouldn't fit into the Evolv DNA 40 chip for soldering. I had to use 20 gauge wire for the batteries. I also bought a 3D printed chip and usb cradle from Shapeways that was really nice...they kept the inside looking nice and neat. I used a low profile 22mm FatDaddy 510 that sits a lil lower then flush...cant even tell its on there with a tank screwed on. Only regrets I have is not putting a 12mm fire button in it.
Great video you got a new subscriber 😁
Thank you for the excellent tutorial.
thank you for the kind words
should review the Kamry 30w V2 , its becoming more and more popular and ive only seen one other review! the 35$ price point makes it a steal
Great information, thanks.
Did you keep clone's charger or bought & installed the evolv's ?
i kept whatever the original cana had.
Were you referring to the 22mm "smooth top" 510 connector from varitube? The reason I ask is cause it says 22mm Smooth top option is for drippers only.
I met Perry from Varitube at a TPC convention, and he gave me a handful. These are called low profile by the man himself.
Personally I think smooth is fine as almost everything we use these days has its own air flow. What still uses 510 bottom air?
The slotted stuff is "just in case"
Ok I see what they mean by smooth top now. The pic wouldnt load at first. Thanx
Hi peg I was wondering if you could show us a normal box mod build maybe with 3 18650 with a switch so we can switch from parallel to series also how to actually attach the heat sink to the MOSFET just in general how you would build a box mod from scratch. I got everything down myself except how to wire the battery sled so I can switch from parallel to series maybe a voltage meter in the box would be nice too I know you're a busy man maybe sometime down the road on this one thanks again
Robert Eby I got a few more strip down videos comming plus I'm working VPX
and I have so many PVA orders to handle. I'll see what I can do.
Was hoping you showed how you got all that expoxy/hot glue out your cana mod.
Keith R small screwdriver, just go ahead
Pegasus Vapor Academy Dude thats what i've been trying. That and a razor and rubbing alcohol. The top white glue layer(which I assume is just hot glue) came off relatively easy enough. The stuff under it has a slight yellow tint(i assume an epoxy of sorts or maybe is hot glue as well) it wont budge at all. My dna30 started saying "check atomizer". When I lift the board by the glue, it will work again but the ohms bounce but mostly stay at .5(what it should be) but go up to 2.8(rarely). But with movement it goes back to "check atomizer". Its not the tank. I rebuilt the coil and tried 4 different drippers, same result. When I purposely short the 510 connection it says "short" as it should. So I assume there is a short under the board, but I cannot get to it. Been trying for a week now and I know using this is not safe, like a hybrid mechanical mod now. But it is all I have, till my order comes in the mail. Just been cautious for tell tale signs of battery over amp/temp. I assume the glue or epoxy is all over the screen glued to this board, with the glue protruding on both sides to keep it centered. I know there is a faulty connection or short happening under there. I just can't get it to. Any help would be greatly appreciated or anything I could try, or anything I may have over looked. Far as fixing it or removing it without breaking the chip. Going to try freezing it next, see if its brittle.