NO LOOKING BACK!! New Holland Boomer Quick Attach Brush Mower!
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Glenn's New Holland Boomer and QuickAttach Brush Buster is put to the test at the Radio Tower Project today on Tractor Time with Tim. The Brush Buster is rated for up to 4" diameter trees but does it live up to its specifications?
Like to know more about Tractor Time with Tim?
Visit our website at:
TractorTimewith...
Tim's favorite products are listed on this site:
amazon.com/shop...
Shirts, mugs and other swag can be found here:
TractorTimeWith...
For more TTWT, follow us on Facebook:
/ tractortimewithtim
and Instagram @TractorTimewithTim
Sponsors:
Heavy Hitch: heavyhitch.com/
Use code TTWT for 5% Discount
John Deere 2038R, 5075E, & 835M HVAC Gator
AHW LLC John Deere Dealership
www.ahwllc.com/
John Deere Parts
www.greenparts...
Use code TTWT for FREE Shipping
Bluetooth Hearing Protection
ISOtunes link: bit.ly/2sCMOG4
$10 Discount with Coupon Code TTWT
Grapple: Artillian (Curtis Cabs)
www.artillian....
Precision Grapple
agfolks.com/
5% Discount Using Code TTWT
Lube Shuttle
lube-shuttle.u...
The Original Tractor Cab
www.originalca...
Use Code TTWT for 5% Discount
You should do these type of episodes again with different tractors/people. It was great seeing how others would attack the same thing. As always it was a great video. Huge thanks to Cristy for all she does for the best shot!!!
Yeah.... christy is a trooper and so important to these videos. We should all pitch in for her something
I agree Christy does a great job filming your work.
And I love how you put a Bible verse at the end😄😄
Most efficient setup I have seen yet,you can actually get something done with this combo.
When I wake up I love seeing TTWT notifications
It’s been interesting and informative to see the different machines in action on the tower project. It gives folks a real look at how the equipment can be used in their own situation. Looking forward to seeing the bigger Brush Mulcher in action. Kudos to Christy. She does great work and is a real trooper! Blessings to you both.
Kenton, it was a joy to meet you, and spend the day with you!
Tractor Time with Tim Likewise Tim. It was a wonderful day with some great folks!! Thanks!
@TractorTimewithTim I think I found the quick attach pump for the Tractor, which mower did you get..it was an awesome video, Please share when you see this.😁
Front mounted mower is where its at! Ran a 110hp 40gpm high flow skid steer with one and it does very well and even cuts grass acceptably.
Another nice video Tim, and Hey! You are getting the land clearing done too! LOL. Nice to see more and more tractor solutions coming out to compete with skid steers! After having mowed with tractor fixed mowers, tractor batwings and skid steer front mowers, there are a lot of advantages in being able to mow in the FRONT of a tractor as opposed to a rear mower. A lot less beating on the under side of the tractor (hydraulic lines, electrical lines, etc). Excellent demo! Thanks.
Kenton's laughter in infectious!!
Yes, Kenton was like that all day long. He laughed and laughed. We all deeply enjoyed his company!
Great to see some blue on the channel!!
I’m amazed at what that mower can go through... Wow, great video Tim!
Wow, that mower was nice! Imagine that mower with chains instead of blades, or like the back mulcher that Tim has on his in front like that, the floating of it was simple but effective too, well, sure pricey but it did a very,very tough job that I did not think that it would even come close to, thanks for showing us all these things!
Finally a New Holland in one of your videos! It is the right color!
Love Kenton’s happy soul. You guys had a ton of fun together.
Same.... he would be a great guy to pal around with. Too bad all these hands aren’t in Texas.
Wow! Just wow!
Had no idea it was going to be that good, fast and effortless.
I like the fact that it mowed forward and did a great job at it.
Great equipment review Tim and Christy, It couldn't have been done better and with more pleasant people, thanks for the video.🙋♂️👍
Thank You for this segment. I am buying a small farm needing some rescue. Nowhere could I have found this information for brush clearing. This segment is going to save me thousands of dollars. I was going to rent. This equipment will do it. I am talking both types.
Same here. We bought 26 acres last year. Over half is overgrown and heavy underbrush. To pay someone with forest mulcher to clear this would be more expensive than buying this attachment. When done, I can do some of this for extra income.... or sell and get a big chunk of my money back. I doubt I sell. Lol
2 points.
Tires and hydraulic flow.
1. Tires. I've brushed hogged a lot and have had tire issues with every tractor I've used when hogging heavy growth. That front mounted hog IMHO may present issues with tires. When I hog I go in one direction only. Don't think that's possible with a front mounted cutter cutting heavy material.
2. Hydraulic flow was almost non-existent in older tractors. My father and I hauled round bales with a little 861 Ford Powermaster and factory Ford FEL. You had to use a PTO pump to get that unit to work properly. Same issues as now except it is 40 years later. But... That cutter requires a lot of hydraulic pressure. Those old tractors like the 861 were not really designed for FEL use as well as today's compact tractors are. Today's compact tractors are well designed for FEL use but are not designed for the extreme hydraulic flow requirements of skid steer implements and attachments.
Thank you Tim for your contribution here on TH-cam. Great informative videos. I appreciate it.
That machine is incredible. Thanks for posting!
Often times it's the dealer not the tractor color, that makes or breaks the tractor deal.
Stephen Dixon absolutely. I was going to buy a Kubota but couldn’t get anywhere with the dealer. Kioti dealer sealed the deal. Talked to friends that had bought from them and swore by them.
Precisely. Deere dealer didnt care, new holland dealer made a deal i couldnt refuse
I could not agree more
Man you guys a quick!! What was it one or 2 weeks ago someone mentioned this kind of set up and here you have a whole show about it! Really cool to see this whole set up explained. Thanks!
Awesome and fun video. Thank you. This is the exact unit I plan on putting on my Kubota SVL75-2 Compact Tractor Loader with 29 GPM. Double what that hydraulic pump in your video is putting out. Can't wait to see it work.
This video is going to help the sales of this rig. Most people would only be maintaining an area after the first cutting and it would go through it with no problem. Soft ground would be the only problem I see.
Best option I've seen yet for clearing brush. Absolutely walked through that mess like a breeze.
That is what it is all about. Enjoying the project. Not being burden of it. Both machines did a great job. Really great job. And you were comfortable. That is the challenge. To have a machine that can be capable of doing the project and for the operator to be comfortable to operate the equipment. Blue, orange, green , or red. Does not matter it is what the operator wants to make the machine comfortable and project efficient. User friendly I guess ya call it. Great comparing aspect. They really got it done efficiently and safely. Great job on this project and ya all had fun I think I that even Christy had fun with the cameras and the drone. Have a great day and weekend
Your the only guy I know that gets depressed when a job is finished it is a great problem to have nice video
Never seen anything like that. Amazing!!!!
That Brush Mower may be expensive with the power pack needed but the amount of work it does it tremendous. Just like a forestry mower on a skid steer but you don't need the skid steer. Going back with you stump grinder may be all you need since they don't need taken below grade for the stumps
That is a beast of a brush mower! To cut any larger trees you’d need a tree shear.
This is an amazing setup. I love this concept.
I do too - Great idea to use the PTO to boost the hydraulic capabilities.
Worked at a JD dealer ship they had the hyd packs for sweepers and snow blowers I think for mowing if doing a lot I would want a tractor with front three point hitch and a flail mower or a skidsteer with this mower type or a flail also if I was using this setup I'd install a bumper on tje front edge to push material forward to keep it off the top of the mower
The hows it cut just mowing grass was a great question. Commenting as I watch. Hope to see that also.
Watched your video's for quite some time now and enjoy all of them. Finally get to watch someone with a Big Blue tractor do some work. :) I know you are a green tractor person but it is nice that you show some other colors doing some fine work also. God Bless.
I thought some of you guys would enjoy this!
One more episode coming!
Pretty impressive piece of equipment especially on such a small tractor
Looks great guys! Thank you for sharing and we appreciate your business.
This is interesting because I have one of these power packs for sale on Equipment trader. The one I have has a 72" snow blower with it and it's still crated. I bought this unit as a package with a 110TLB John Deere. The add will expire 6/26/2020. I wanted the 110 and where I live there's not a lot of snow.
when you love what you are doing the work is more like playing 😀😀😀
Very impressive mower!
Hmm, You can learn a lot from a video like this and what I learned is you can get a lot of work done by asking a group of guys who has the better equipment ;)
That's a great piece of equipment, I want something like that if I can ever get a bigger tractor, it'll save your neck an back
I helped install one of these hydraulic packs on a 5000 series JD so it can be done hoses had to be lengthened etc but it can be done
Tim when they came out with the cvt transmission I have a hatred for it because say your going along and the belt explodes your dead in the water where as the shuttle shift with the hydrostatic transmission or the ivt hydraulic transmission if you loose a range you still can get out of a sticky situation
That is a sweet mower/brush eater
I love the look of that new system and how it works on that New Holland tractor and the operator is working the system too with his knowledge of the equipment and what it can do.
You know it’s a good day when TTWT posts!!
Very informative video. Tim, those are two great guys, and they have some impressive equipment.
This was great seeing what different tractors can do. They all have there +/- . The best thing all tractor folks are great. Thanks for sharing Tim
Wow Tim it eats everything!
Interesting video - the field is looking good
So impressed with that New Holland with the rear PTO driven hydro pump and crzy powerful fron t hydro mower.
Nice piece of equipment but I still like the High Flow Forest Mulcher on Skid Steer.
Building one of these for my GC1723; except I’m mounting it under the tractor and powering it off of the 2000 RPM PTO (I don’t have a mid-mount mower). I’m going to use it to power an old 48” Deere lawn tractor deck, attached to the FEL, for getting under stuff & down a few banks here (I’ve got a bad back and can’t use a weed whacker for any length of time).
Nice video. It would be nice if there was a link in the description section to where you can buy this unit.
The utility lines 50hp to 90hp suffer from low flow hydraulic as well.
That’s a painful fact
Hi Tim and Christy that is one mean machine nice video take care and stay safe
Thank you 🇺🇸
It is the right color. :)
I’ve rented a Bobcat skid steer with the front-forks mounted, hydraulic bush hog and it spoiled me. Even though I now have a compact (2038R), I’ll probably still rent the Bobcat combo to do my one acre a couple of times/year. Not enough use to justify the expense of buying my own rear PTO brush hog (even over time) and it’s one less thing to store. But that big monster on the New Holland is the “Mac Daddy” of brush hogs: WOW! 💪
Thanks also for the chat about CVT; interesting for non-AG types like me.
I have a Bobcat T650 and would like to have a 3 pt adapter so I can use my 84"3 pt Bush Hog on the front of it
That setup on the new Holland was the bee's knees for mowing stuff of that caliber. Tim if I recall you showed an auxiliary rear pto powered hydraulic pump for the 1025 or 2038 at one time? Would you consider a solution like this for the one series sized subcompact tractors?
Didn’t think a tractor would run a mower on the front very well. Good stuff guys.
Why?
That hydraulic power pack can also run a nice big loader-mounted snow blower.
EOSJOE ... or post hole digger...and I wonder if it would run that Baumalite
Jax Turner I didn’t think it would have the hydraulic power to turn it good enough to be very effective. Most of my experience is with skidsteers, not tractors.
Love the video, this is exactly what I have been looking for!! I really like when y’all show different attachments and demonstrate how much they are capable of doing! By the way, where would you purchase this ?
Im with you Tim, I think that mower needs a pushbar on the front. I think it would really speed up the the process if you were doing this as job(getting paid). However, i also understand the added weight if you were clearing steeper ground. All in all, im impressed with the machine. Stay well and stay safe 👍👍👍👍👍👍👍👍👍👍👍👍👍👍
That's impressive
thank you
I'm curious about your comment about smelling burning rubber Tim, he said it's in 2wd after you made that comment. I'm curious about the details of that issue, if it was in fact a issue? Thanks as always for the video!
I'm thinking it may have been the belt on the CVT transmission.
Me too.
If I did that for a living, I would definitely want a skid steer. However, for one-off jobs around the farm of for friends and neighbors, that thing would be great!
That’s what I’m looking for!
On the skid steer mulchers /brush mowers they have a large 6" dia pressure gauge the operator can see to help gauge the load on the cutter head since it definitely can be hard to hear it pull the cutter head down in RPMs. It's all in an effort of heat. Does the power pack have any way to trigger a high oil temp to the operator?
Yes there is thermal switch which controls the fan and a indicator cooling light i'm going to switch out the lite for a bigger one or run wiring into the cab and set something up on the dash the harness.
Thanks for great videos and the BIBLE stuff at the end!
Thanks for the encouragement!
Best time ever.
Great video Tim. It was nice seeing what those mower configurations could do. That tower property is the perfect proving ground. :-)
Did anyone else hear Al Borlin say “I don’t think so Tim”
Hi
I caught that too
I just walked away (everything was done but me signing my name) from that same tractor because of the hydrolics. The Mahindra I bought will cut a 4" tree with the SD 6' bushog.....I know because I've done it. No Regen, better warranty, more lifting power. in my opinion much better tractor all around. Obviously many agree with me for them to be the #1 selling it the world.
I have a quick attach brush buster as well and it is awesome.
Another great video. I wish that mower was attached to my new Holland.
Awesome video, my wish list just keeps growing Tim. i really enjoy the projects and product reviews and equipment comparisons. I find it very interesting how unique each piece of equipment is and what it does best and the most efficient.
I prefer the hand control hydrostatic over the foot control
fair enough. I used to think so. But I now prefer the foot control.
I'd be worried about stobs puncturing the tires and that alot of weight on those loader cylinders
Enjoyed the 2 part video and seeing the equipment in "real world " conditions. Is the project finished ?
Not yet!
@@TractorTimewithTim See my comment before you finish it 🙂 - Would truly be fitting to see the 2038R with the power pack and that front mount mower on the same job and especially in comparison to brush mulcher and to how it worked on the bigger New Holland.
Q: am i seeing a theme here?
A: I dont think so Tim.
Lol. I love it!
I wonder is there a front 3pt and pto version of this? Do compacts and subcompacts ever come with a front pto and 3pt? I just don’t like all the friction / heat losses you get with hydraulics. You can hear how long it takes the mower to come back up to speed after a big hit. It sure is a lot gentler on the tractor though.
Lots of fun. Nice video.
I would prefer push rather than pull behind. You can see without turning around every two seconds. I wish you would've taken us inside the NH cab.
Good,cann work in thee garden,😄👍
I wonder if a compact or a subcompact tractor, could you get a mini skid steer brush hog and a power pack and do the same thing
I agree with Danny, do different brand of tractors, very good video. What is HP of the New Holland? Thanks
I need to stop watching TTWT cause my Wish list is the size of a large dictionary :) we set next summer some time to get a 1025R
Your wish list is growing too? Thought I was the only one with that problem. Lol.
I would love to try that mowing the grass field I am doing with a 6' flail.
How does that mower do in wet grass?
The questions I have.
I need to play the lottery!
@@Drew6709 I have never tried it in wet grass but have cleared stuff tall as the cab . Would probley do fine as it is designed for both brush and grass I touch the blade edges up after heavy brush work so its ready for the next time.
@@glenncollins1417 heard your mower is a 66". Do you think it would handle a 72"? I have a 42 hp Kubota (open station with canopy) which has roughly 37.5 pto hp. (18 3/4). I do a lot of mowing for hire during the summer. Curious if this might be worth saving for. I'd rather have a track loader to put the tractor at home.
That's the only reason why they do advertising - to keep plugging your ears with it. Don't believe the news, cause all they do is lie. I don't need no programming, telling me what to buy. Oh I believe, I believe the truth will set you free. I believe the truth will set you free.
I think you'd like that shifter where it is if you were running the loader. How would you operator the loader controls and change directions both with your right hand? Going hands free for a second at low speed gets both things done and keeps you moving.
But a switch on the loader joystick would be even nicer. Just move it with your thumb!
Quite the machine Tim I'm impressed
You need a hydraulic tank to keep that oil cool, it's just not economical for guys to have tractors with 30 gallon hydraulic oil capacity, would make maintenance alot more costly so then people probably wouldn't do it as often.
Love the Al Borlan reference lol
Nice video tim and kristie and a nice machine with a lot of power 👍
And why is there any thumbs down??
You know, I’ve never understood that either.
It's the Enviro Nazis they get triggered every time somebody cuts their lawn
such a satisfying vid keep em comming tim that power pack is a cool idea i wonder if it would work on johnny 2
Yes, would work on Johnny 2.
@@TractorTimewithTim would be interesting to sere the results but without that cab that mower might be deadly
Absolutely awesome video Tim!! This proves that I would benefit from this setup! I am looking at a high flow version.
It requires between 80-150 PTO hp but can run both low flow 25GPM and hi flow at 35GMP.
Definitely the route I want to take.
What implements still use either 750 or 1,000 rpm PTO these days?
It's 540 and 1,000. Most bigger farm tools run 1,000. The shaft is bigger with more splines. We have a Case 16 row planter with 1,000 rpm for the planters hydro pump. I think he said this tractor only had 40 hp @ the pto.
I really like this cutter but I think it needs to be able to cut at any height just like the skid steers. my kioti RX 7320 is factory rated just under 20 gallons per minute on its hydraulics. no need for a PTO driven pump
Great video, that boomer cuts really well even with a boomer driving it.
I need to get that mower and power pack when I go to buy my 4 series compact john deere tractor 😎
very impressive mower
Thank you for sharing.
Wish i had one.
The deck should have a brush bar on it