This was a older versions the plenum size of our valve is 45cc but the main plenum depends on the size of the bottle u have the valve screwed into as it's a inline valve so the bottle is the main plenum here is the link for our 2024 MOAV africanairordnance.com/424820687#!/products/texan-ss--308-moav-2024-xl-super-valve
@@redgum1340 no there is no regulator the platform was designed as a hunting platform if you want to regulate the gun you can install a regulator on your big bottle then tether off there
No our valves are a different design Airforce valves are only designed for max of 250 bar over pressure can damage the stock poppets by making them crack our valves don't just get the power from high pressure but from the internal design and much large Internal Plenum that prevents big drop off in fps between shots not only giving more shots per full but using less Air per shot
Love it. Powerful!
I have a 4500 tank set up for my airforce texcan 308 but I got it and it came with the springs and o rings but I could not get it working
that's crazy! deff. need a moderator on that thing!
Great review
Can you tell me if these 230 grain slugs flew straight, or did they tumble?
And were they accurate
With the factory barrel they will tumble but if you switch to a 1 in 10 or 1 in 8 twist rate they will stabilise and Will fly straight
@AfricanAirOrdnance
Thank you very much for getting back to me.
What is the heaviest slug one can use with the std factory barrel?
What size is the plenum in your valve? Looks pretty much like a standard AF valve in the video shown.
This was a older versions the plenum size of our valve is 45cc but the main plenum depends on the size of the bottle u have the valve screwed into as it's a inline valve so the bottle is the main plenum here is the link for our 2024 MOAV
africanairordnance.com/424820687#!/products/texan-ss--308-moav-2024-xl-super-valve
@@AfricanAirOrdnance Yeah, I can see the valve is large BUT there is no REGULATOR in this valve, right?
@@redgum1340 no there is no regulator the platform was designed as a hunting platform if you want to regulate the gun you can install a regulator on your big bottle then tether off there
Can I get the same FPE if I just stay with the stock valve and just buy the hammer, hammer spring, and 4500 psi bottle?
No our valves are a different design Airforce valves are only designed for max of 250 bar over pressure can damage the stock poppets by making them crack our valves don't just get the power from high pressure but from the internal design and much large Internal Plenum that prevents big drop off in fps between shots not only giving more shots per full but using less Air per shot
This longer bullets tumble?
Not on a 1in 10 twist rate barrel
envious
Screaming
For sure you should check out the 257 numbers in our new videos