I was trying to figure out how to control lights in sync but could not figure it out. Your video saved me a lot of time and heart-ache, plus it showed me other cool tips as well. Thanks for the info
Hi thanks for this video. I have lights in my soffits, and I would like to group the bulbs red and green. Every Christmas I manually have to remove bulbs, and install the color at the particular location. Can you post a video that can represent reds and greens.
Right out of the box these lights are ready to be screwed into a light fixture just like a light bulb. Super easy! In one part of the video I showed how to disconnect the wire but there’s no need to do that. Maybe to make it easier to screw in without the light dangling. But no extra steps were needed to install these RGB recessed lights. Hope this helps!
I re-read your question. I did not plug the new lights into the old connector. They’re different brands with different connectors. But I didn’t check for sure.
The lights shown in my video require a can installed in the ceiling. But Lumary has a version that doesn’t require a can. I think it just holds onto a hole in the drywall on the ceiling. When you look up these lights you’ll see that model. However you still have to get them wired up but if your ceiling is opened up that shouldn’t be a problem!
I'm interested in these lights for my home theater project. Can they also be controlled using a smart switch such as the Brilliant Smart Home Control Switch? I have a few of these in my home and it's a deal breaker if I can't use my existing smart switch for these lights.
Nice video! I am interested in replacing my br30 6" can lights in 9' flat ceilings with recessed retrofit fixtures. I really want to see if I can have dimmer switch enabled/controlled white color changing 2700k-5000k soft white to daylight fixtures. I am using toggle switch dimmers, not wifi dimmer switches. I do NOT want fixture slider switch enabled color change, only dimmer switch color change ability.. Not interested in ability for Alexa or google or app changing. Do you know of this?
Hi I have a important question, I have a Alexa and have the account linked to it but how do I make it so I can say to Alexa, “Alexa turn on music mode” so I don’t have to put a phone up to Alexa and play the music from the Alexa to the phone. So I can just pick a song and say for Alexa to turn on music mode?
I was trying to figure out how to control lights in sync but could not figure it out. Your video saved me a lot of time and heart-ache, plus it showed me other cool tips as well. Thanks for the info
Excellent! I’m glad i was able to provide helpful tips for your Lumary lights! Thanks for watching!
Hi thanks for this video. I have lights in my soffits, and I would like to group the bulbs red and green. Every Christmas I manually have to remove bulbs, and install the color at the particular location. Can you post a video that can represent reds and greens.
Do this lights always flash colors or can the color be 1 steady color?
With these RGB lights they can be set to one steady color. In the app just use the color picker and choose the static color you want. Hope this helps!
@@TheRenderQ thanks so much. I’m opening a venue and looking for these. Do u think they are great for commercial use?
Does I have to change the light switch to smart one or it doesn’t matter
Did you install a connector for each light.. Are did you tap the wires in to the original connector
Right out of the box these lights are ready to be screwed into a light fixture just like a light bulb. Super easy! In one part of the video I showed how to disconnect the wire but there’s no need to do that. Maybe to make it easier to screw in without the light dangling. But no extra steps were needed to install these RGB recessed lights. Hope this helps!
I re-read your question. I did not plug the new lights into the old connector. They’re different brands with different connectors. But I didn’t check for sure.
nice video and thanks for the link. Gonna start with 2 and if I like them I will add more. This video is 7 mo old, how are they holding up?
Can these light be used for new installation? I don’t have any existing can lights installed
The lights shown in my video require a can installed in the ceiling. But Lumary has a version that doesn’t require a can. I think it just holds onto a hole in the drywall on the ceiling. When you look up these lights you’ll see that model. However you still have to get them wired up but if your ceiling is opened up that shouldn’t be a problem!
I'm interested in these lights for my home theater project. Can they also be controlled using a smart switch such as the Brilliant Smart Home Control Switch? I have a few of these in my home and it's a deal breaker if I can't use my existing smart switch for these lights.
Nice video! I am interested in replacing my br30 6" can lights in 9' flat ceilings with recessed retrofit fixtures. I really want to see if I can have dimmer switch enabled/controlled white color changing 2700k-5000k soft white to daylight fixtures. I am using toggle switch dimmers, not wifi dimmer switches. I do NOT want fixture slider switch enabled color change, only dimmer switch color change ability.. Not interested in ability for Alexa or google or app changing. Do you know of this?
I assume I would have to remove my dimmable switch??? Correct?
Hi I have a important question, I have a Alexa and have the account linked to it but how do I make it so I can say to Alexa, “Alexa turn on music mode” so I don’t have to put a phone up to Alexa and play the music from the Alexa to the phone. So I can just pick a song and say for Alexa to turn on music mode?
Cool but way too much work to turn a light on my down time isn't for playing with the lights lol
The app is rubbish don't work software don't work