Nice, but to make it nicer you could use 3060 cross sections in front and rear and use rounded profile 3030R (90 degrees) to connect corners. This would give you nice rounded look.
Oh MY Gosh! How could one watch anything when all one wants to do is close one's eyes and LiSTEN to this music. I had better run this video a few times to get some viewing in aswell. Your videos are certainly intriguing.
@TheAluminumCarpenter nice job congratulation of the idea and the filming. I am going to do similar thing for my Van. I wonder what you have used on 1:40 in your film? I have impression on the first view that it was a aluminum welding tool :) Or Was it the Impact Drill? If this was the impact drill what N moment have you setup? I am looking for an idea to lock the screws against unscrewing? Do you have any recommendation?
hello, did you use 30x30 profile or 40x40 i want to try it our but iam not sure if 30x30 is enough for a roof top tent with 2 persons. Hope you can help me out.
Hey, nice build! how do you think what max load on this rack? is it possible to sit or stand on rack? I now trying to decide what to choose 4040 or 3030, thanks :)
Thanks 😀 i never had a chance to test max load. Cos its a customer’s build. But i am sure it boils down to the mounting brackets and not the extrusion. Depending on your vehicle, i still suggest 3030. Cos 40 is already overkill.
@@AVGideasJM no, the type of joinery chosen in this roof rack build was meant for ferrying camping gear. To house people, different joinery will have to be used in order to guarantee strength. Despite that, i still need more info from you to have a better idea.
@TheAluminumCarpenter I just knew about this system recently like days ago. Are the spacing between each rail different in each seriess? There are ready made brackets on the net and I'm afraid it might not fit my 40 series crossbars
@@JadeDea-k3m yes, they are different. and different in more ways than we think. i want to help you but over here there is no way to provide us a picture. please email us from our website. please go to the 'About' section of my channel to find the data.
Nice, but to make it nicer you could use 3060 cross sections in front and rear and use rounded profile 3030R (90 degrees) to connect corners. This would give you nice rounded look.
Oh MY Gosh!
How could one watch anything when all one wants to do is close one's eyes and LiSTEN
to this music.
I had better run this video a few times to get some viewing in aswell.
Your videos are certainly intriguing.
😀
Man does the black anodize look great.
Yup 😊 it looks so nice, its delicious 🎉
Looks great. I'll probably use some of these ideas.
First song made me wanna chop my nadz up into tiny pieces tho.
Glad it helped!
I need this for my car!
Bring me your car first Pearlyn!
@TheAluminumCarpenter nice job congratulation of the idea and the filming. I am going to do similar thing for my Van. I wonder what you have used on 1:40 in your film? I have impression on the first view that it was a aluminum welding tool :) Or Was it the Impact Drill? If this was the impact drill what N moment have you setup? I am looking for an idea to lock the screws against unscrewing? Do you have any recommendation?
Very good 👍🏻
🙂
Masterpiece bro
Very nice, indeed! 😃
Thanks ❤
How did you mount it to the vehicle? Was hoping to see that.
I didnt take a good shot at that. But for your info, mounting brackets for these are specific to each individual vehicles.
How do you determine the strength needs and capacities for each project?
hello, did you use 30x30 profile or 40x40 i want to try it our but iam not sure if 30x30 is enough for a roof top tent with 2 persons. Hope you can help me out.
This was 30 series, not 40
Hey, nice build! how do you think what max load on this rack? is it possible to sit or stand on rack? I now trying to decide what to choose 4040 or 3030, thanks :)
Thanks 😀 i never had a chance to test max load. Cos its a customer’s build. But i am sure it boils down to the mounting brackets and not the extrusion. Depending on your vehicle, i still suggest 3030. Cos 40 is already overkill.
What are the alignment tabs in the jar called?
Great idea. How is the sound when driving? I'm concerned the square shape with middle groove makes a whistle or become noisy with wind .
Those holes were covered up. No sound i guess.
how did you connect the rack to the roof here?
These are off the shelf products that customer self sourced. I do not have the link.
Where do you find the drip rail clamps?
What is a drip rail clamp?
Bonjour où je peux acheter ces tubes carré en aluminium ? Je ne trouve pas sur le site the aluminium Carpenter
What did you use for the feet
There are no feet. Just after market products specific for that vehicle. Your vehicle may be different.
What do you call that specific 1x1 Aluminium tubing?
this is aluminum extrusion 3030 series.
Where can i buy those clamps to attach the roofrack?
Yes! I have the same question.
I am unable to answer this. Its provided by the customer. If u find it, please share with all of us here in this comment. 😀
Ali express
what did you use for that rubber strip in the extrusion?
Pvc slot cover
cool
Malaysia how much total material cost?
i do not know. you have to find out from your suppliers.
Can this hold a roof top tent? Thnx
What is a roof top tent? For people?
@@TheAluminumCarpenter Yes, for people.
@@AVGideasJM no, the type of joinery chosen in this roof rack build was meant for ferrying camping gear. To house people, different joinery will have to be used in order to guarantee strength. Despite that, i still need more info from you to have a better idea.
The 3030 constructon for sure. (Shpuld be good for 200Kg.) The clams probably not...
Thanks for the help in explanation
How about the weight of the rack?
Never really weighed it, but manageable by 2 persons to mount.
Total cost?
Probably around usd$300 😀
is that a 10 or a 20?
Its 3030 series.
@TheAluminumCarpenter I just knew about this system recently like days ago. Are the spacing between each rail different in each seriess? There are ready made brackets on the net and I'm afraid it might not fit my 40 series crossbars
@@JadeDea-k3m yes, they are different. and different in more ways than we think. i want to help you but over here there is no way to provide us a picture. please email us from our website. please go to the 'About' section of my channel to find the data.
Expensive.....
Depends on which part of the world.
intro music hurts a lot.