Thanks for the video and I know its an old video but I'm trying to determine if the flame crossover slot is supposed cut into the inside of the burner? My burner is much hotter at the back than the front making it hard to cook on. The slots are cut thru on my burners. THanks in advance.
I have a Blaze 5 burner LTE and can't get both sides of the outside burners to light. I've cleaned the groove on the bottom and that has made the 3 interior burners operate much better. Is the groove on the bottom of the burner designed to carry the flame via the crossover tube? My far left burner has that removed for the infrared burner so the right side won't light. My far right burner won't carry the flame to the right side either. I can light them manually but that's stupid for a $3k grill. Any ideas???
I purchased a 5 burner built in NG grill 3 weeks ago. After my 3rd cook my igniters are giving off no spark. I am getting plenty of gas and can light the burners with a lighter. I cleaned igniters with no resolve. They are just not sparking. Very frustrating for a grill that is only three weeks old and only three cooks in.
I just bought a pro series built in gas grill and when I go to light it, the first two burners light up no problem, then when I try to light the next two, it kicks off the first two I lit. Trying to figure out what the issue is and if my installer hooked it up wrong. Thanks!
Anyone have any ideas as to replacing the pins that hold up the flame tamers? I have the replacement parts however the pins are broken off and flush with the inner wall of the grill. Not sure how to drill them out.
![บุษบา - เมนทอล [Official MV]](http://i.ytimg.com/vi/IGnWPokSEis/mqdefault.jpg)
Thanks for the video and I know its an old video but I'm trying to determine if the flame crossover slot is supposed cut into the inside of the burner? My burner is much hotter at the back than the front making it hard to cook on. The slots are cut thru on my burners. THanks in advance.
I have a Blaze 5 burner LTE and can't get both sides of the outside burners to light. I've cleaned the groove on the bottom and that has made the 3 interior burners operate much better. Is the groove on the bottom of the burner designed to carry the flame via the crossover tube? My far left burner has that removed for the infrared burner so the right side won't light. My far right burner won't carry the flame to the right side either. I can light them manually but that's stupid for a $3k grill. Any ideas???
I purchased a 5 burner built in NG grill 3 weeks ago. After my 3rd cook my igniters are giving off no spark. I am getting plenty of gas and can light the burners with a lighter. I cleaned igniters with no resolve. They are just not sparking. Very frustrating for a grill that is only three weeks old and only three cooks in.
I have the 30 Griddle, for some reason I can’t get both sides of the griddle to burn evenly. I’m using the regulator that came with it. Any ideas?
I just bought a pro series built in gas grill and when I go to light it, the first two burners light up no problem, then when I try to light the next two, it kicks off the first two I lit. Trying to figure out what the issue is and if my installer hooked it up wrong. Thanks!
Anyone have any ideas as to replacing the pins that hold up the flame tamers? I have the replacement parts however the pins are broken off and flush with the inner wall of the grill. Not sure how to drill them out.
How do I fix burners that get too hot? Even on the low setting, the flame is way too hot.
I am so frustrated with my Blaze grill I want to bring it back.... 2K and it has been nothing but problems...... Bought it in April 2022