Hi LRN2DIY...I Thank GOD for you and for your tutorial. I'm a 61 yr old woman. I don't have anyone that I can rely on to help me with home repairs. So I have to rely on tutorials on TH-cam. Your instructions were easy to follow. You didn't make it complicated by using jargons that I didn't know. Again Thank you and GOD BLESS!!!
I did this a couple years ago having never opened up a dryer before. It really is as simple as he makes it look. My dryer wasn't producing any heat, so it was obvious the heating element/components needed replaced.
These older models make it a breeze to get to the heating elements. My Samsung one I bought 4 years ago makes me feel like I need a sword, shield and potion to get to the heating element. Great advice in this video.
Lint traps get coated with a film from fabric softener from time to time. Take it out, run water onto it and note how long it takes for all the water to drip thru. Then wash it with soap and water, try running water onto it again. You may notice it drips thru alot faster !
My dryer is creating heat, but takes several attempts to dry a relatively small load. The lint trap gets cleared with every load and the ventilation seems to be pretty clear through to the outdoors. Would a heating element be the problem? It does tumble and creates a lot of heat...
If you're unlucky enough to own an older stackable washer/dryer, a fourth reason your dryer might not be drying as well as it once did might be that lint has accumulated over time inside the housing around the drum and in the back behind the drum, where the heating elements are. I replaced the rear drum bearing on mine (dryer was squealing like mad) and while I had the drum out I cleaned the interior thoroughly. I probably pulled out enough lint to knit a sweater... not kidding! I put on a new exhaust hose because the old one was badly crimped. Afterward, the dryer dried clothes in maybe half the time it used to. Lots of work when you fix a stackable, but it's worth it.
If it’s the thermostat, that can easily be replaced as well. They don’t cost much and they’re a pretty easy swap, as you saw. And yes, there is a belt that goes from the motor to the drum. Those can slip or break but that typically only affects the drum rotation.
You’re supposed to remove lint from the lint trap every time. That’s why it’s so prominent. Even if air is still flowing, it’s just that much more restricted and less efficient. You are wasting money and time if you don’t clear the lint trap with every load.
Omg,looks so simple! And yet I have a technician come out 3rd time in the past 2 weeks and he is replacing everything but these 2 items and the dryer still not drying the clothes, all comes out damp:( Wish I had found this video before wasting time with a technician who doesn't know how to fix the issue!
My dryer is getting hot. But not drying or collecting lint. The dryer is about 6m old. I've taken the back off to see if it was clogged and it wasn't. So I had the duct worked on and still have the same issue
My dryer was not heating up very good. So I replace the dryer and then went outside to the vent which did not have a cover on it. So, I reached way down into the tubing and found a birds nest with egg. So, I learn an important lesson have a cover and I probably did not need a new dryer!
Help! I old Samsung dryer stopped drying clothes and I replaced it with a new one. The new LG one still doesn't dry clothes, so I had my air vents cleaned. But it's still not drying and I get an error after a while. 😭
This was really nice and clear. Thanks. No need to edit though or maybe post 2 choices? I kind of like to see it in real time, unless a phone call comes in...
I'd recommend wearing gloves while working on a washer or dryer. My first time, I came away with what felt like a dozen paper cuts on my hands and fingers.
I usually use a solar dryer. It’s inexpensive to operate, and it doesn’t shrink clothes, but it is slightly more work. When the weather is wetter than the clothes, I use an indoor version in the garage.
You didn’t do any actual troubleshooting of the components to determine what was wrong. You just bought new parts hoping for the best? And what if that wasn’t the problem? I’d like to know for certain whether parts are bad before actually buying replacements.
He mentioned you could check for continuity on the fuse... and did all the other things before replacing the heating element.... Did you not get the help you wanted by watching this video?? I take it you didn't do anything to fix your problem except complain at someone giving you the solutions
You did no troubleshooting. You never said if it was heating or not, I assume it wasn't . If it's heating but not drying well, it is always going to be an airflow issue. The thermal fuse you replaced was not the problem, because when it fails, the dryer will not start. There is another fuse above the element, called a thermal cutoff, that will cause the dryer to stop heating when it fails. Use a meter and replace whatever does not have continuity.
Has no meter, so he is just guessing. Then he say to disconnect the gas, when he is fixing a dryer with a electric heating element. Two thumbs down. What if you have a circuit board and the relay is bad?
Hi LRN2DIY...I Thank GOD for you and for your tutorial. I'm a 61 yr old woman. I don't have anyone that I can rely on to help me with home repairs. So I have to rely on tutorials on TH-cam. Your instructions were easy to follow. You didn't make it complicated by using jargons that I didn't know. Again Thank you and GOD BLESS!!!
I did this a couple years ago having never opened up a dryer before. It really is as simple as he makes it look. My dryer wasn't producing any heat, so it was obvious the heating element/components needed replaced.
Bro, hands down, this video is well broken down thoroughly… thanks!!!!!
These older models make it a breeze to get to the heating elements. My Samsung one I bought 4 years ago makes me feel like I need a sword, shield and potion to get to the heating element. Great advice in this video.
This how I feel doing the oil change and battery change in my moms hybrid
Awesome money saving project! Well explained!
Lint traps get coated with a film from fabric softener from time to time.
Take it out, run water onto it and note how long it takes for all the water to drip thru.
Then wash it with soap and water, try running water onto it again.
You may notice it drips thru alot faster !
very helpful. thanks for sharing your knowledge.
My dryer is creating heat, but takes several attempts to dry a relatively small load. The lint trap gets cleared with every load and the ventilation seems to be pretty clear through to the outdoors. Would a heating element be the problem? It does tumble and creates a lot of heat...
Outstanding video.❤🎉😊
If you're unlucky enough to own an older stackable washer/dryer, a fourth reason your dryer might not be drying as well as it once did might be that lint has accumulated over time inside the housing around the drum and in the back behind the drum, where the heating elements are. I replaced the rear drum bearing on mine (dryer was squealing like mad) and while I had the drum out I cleaned the interior thoroughly. I probably pulled out enough lint to knit a sweater... not kidding! I put on a new exhaust hose because the old one was badly crimped. Afterward, the dryer dried clothes in maybe half the time it used to. Lots of work when you fix a stackable, but it's worth it.
I thought the same!
What if it's the thermostat? Is there such a thing as a dryer belt? Thanks for this video and thanks in advance for answering my 2 questions.
If it’s the thermostat, that can easily be replaced as well. They don’t cost much and they’re a pretty easy swap, as you saw. And yes, there is a belt that goes from the motor to the drum. Those can slip or break but that typically only affects the drum rotation.
@@LRN2DIY Thanks again. My old dryer more than once needed a dryer belt.
You’re supposed to remove lint from the lint trap every time. That’s why it’s so prominent. Even if air is still flowing, it’s just that much more restricted and less efficient. You are wasting money and time if you don’t clear the lint trap with every load.
what if you test the heating element and thermostats with an ohm meter and they pass...but you still get intermittent heating?
Nice tutorial, thanks. Off-topic: what program do you use to edit the video to cut out some seconds here and there? 👍🏼
Wow, thank you!
Omg,looks so simple! And yet I have a technician come out 3rd time in the past 2 weeks and he is replacing everything but these 2 items and the dryer still not drying the clothes, all comes out damp:( Wish I had found this video before wasting time with a technician who doesn't know how to fix the issue!
Thank you!!!
My dryer is getting hot. But not drying or collecting lint. The dryer is about 6m old. I've taken the back off to see if it was clogged and it wasn't. So I had the duct worked on and still have the same issue
Thank you brother
Thanks. Didn’t know about where h- element was. ( not followed closely) thermostat. Rewind.
I am a woman and this is very helpful information thanks
What part of the dryer are my socks in? We have a similar model lol
My dryer was not heating up very good. So I replace the dryer and then went outside to the vent which did not have a cover on it. So, I reached way down into the tubing and found a birds nest with egg. So, I learn an important lesson have a cover and I probably did not need a new dryer!
Consider the less popular problem... the exhaust vent pipe is getting clogged. Messy fix but often overlooked.
Help! I old Samsung dryer stopped drying clothes and I replaced it with a new one. The new LG one still doesn't dry clothes, so I had my air vents cleaned. But it's still not drying and I get an error after a while. 😭
This was really nice and clear. Thanks. No need to edit though or maybe post 2 choices? I kind of like to see it in real time, unless a phone call comes in...
I'd recommend wearing gloves while working on a washer or dryer. My first time, I came away with what felt like a dozen paper cuts on my hands and fingers.
I’ve never seen a gas dryer in my life and I’ve lived coast to coast. I know it’s mostly a northern thing but it just seems so weird to me.
My in-laws have one and we live in Florida!
What is your model number can't be found anywhere not even by the manufacturer
I usually use a solar dryer. It’s inexpensive to operate, and it doesn’t shrink clothes, but it is slightly more work. When the weather is wetter than the clothes, I use an indoor version in the garage.
😂😂
What did you use to unscrew the panel. Mine has hexagonal screws
You didn’t do any actual troubleshooting of the components to determine what was wrong. You just bought new parts hoping for the best? And what if that wasn’t the problem? I’d like to know for certain whether parts are bad before actually buying replacements.
I'd spend the $25. before calling someone out for over a hundred.
He mentioned you could check for continuity on the fuse... and did all the other things before replacing the heating element.... Did you not get the help you wanted by watching this video?? I take it you didn't do anything to fix your problem except complain at someone giving you the solutions
Just hang your clothes outside ya big baby😂
Our dryer performs poorly. I’m very tempted to give it a try.
I would have tested it before i put it all back together. Just in case there were issues, you wouldnt have to undo all those screws
people don't clean the lint trap every cycle?
Crazy right? I’ve heard horror stories. I don’t think we can go two loads without it filling up.
My lint trap is cleaned after each load.... perhaps those who do not ever clean it should not have dryers...
Yeah, seems crazy that people wouldn’t empty it.
Wish you made this video a month ago before I replaced my dryer 🤣
Ah man!
As for the music? It's put into writing as organized math. THEN THEY PUT IT INTO MOVEMENT. Got it? Then it moves
Disconnecting a gas line is not going to help you when it comes to repairing an electric dryer.
You did no troubleshooting. You never said if it was heating or not, I assume it wasn't . If it's heating but not drying well, it is always going to be an airflow issue. The thermal fuse you replaced was not the problem, because when it fails, the dryer will not start. There is another fuse above the element, called a thermal cutoff, that will cause the dryer to stop heating when it fails. Use a meter and replace whatever does not have continuity.
Has no meter, so he is just guessing. Then he say to disconnect the gas, when he is fixing a dryer with a electric heating element. Two thumbs down.
What if you have a circuit board and the relay is bad?
Can you tell me exactly how to do that? I know you use a volt meter. But I don’t know which settings to use…?