How to Install Aftermarket Fog Lights (Honda CRV 2017-2019)
ฝัง
- เผยแพร่เมื่อ 22 ก.ค. 2024
- I forgot to show the harness connected to the battery but you can see it at 12:37. Red to positive and black to ground to stay consistent with the rest of the connections.
Installing aftermarket fog lights for a Honda CRV 2017-2019, but fog light installation for most cars are similar. I decided to run the fog light independently of the head lights.
Picked up some aftermarket fog lights for $175 CAD + $25 CAD Honda wiring harness; both off eBay. They are an OEM style of the fog lights available on higher trims of the 2017-2020 CRV in Asia and Europe.
Comment below what you think of the fog lights, and also feel free to ask questions there and Ill try my best to answer them
Fog Light Unboxing & Issues: • Unboxing $200 eBay OEM...
Fog Light Install VLOG: • Installing LED Fog Lig...
-----------------------------------------------------------------------------------------
Fender Removal Video: • Honda CRV How to Remov...
-----------------------------------------------------------------------------------------
Items Used:
Some people are asking for a link to the item. Unfortunately, the ebay seller changed their listing and no longer off the multiple colour fog lights with sequential turn signals. However, if you search for "2017 Honda CRV Fog Lights LED" you should be able to find other listings of these lights such as this one: www.ebay.ca/itm/For-Honda-CR-...
Fog light harness for Hondas that I purchased:
www.ebay.ca/itm/Relay-Wiring-...
CANADA:
T-Tap Wire Connectors: amzn.to/2Ho1kMY
Fuse Tester: amzn.to/38Yf6Bj
Soldering Iron: amzn.to/2IMw6jr
USA:
T-Tap Wire Connectors: amzn.to/2IT2mkE
Fuse Tester: amzn.to/3pJWZ86
Soldering Iron: amzn.to/35Pzm6k
-----------------------------------------------------------------------------------------
Instagram:
@_anthonymo
@anishnothoo
Anish's Channel: / @anishnothoo
Special thanks to Greg(ory) who currently does not have IG
-----------------------------------------------------------------------------------------
0:00 Introduction & Wiring Setup
3:00 CRV Specific Installation
5:50 Tapping Into the Turn Signals
8:55 Connecting the Harness to the Fog Lights
11:55 Firewall and Interior Button
15:30 Testing the Fog Lights
16:25 Conclusion
-----------------------------------------------------------------------------------------
Music:
"Eternity"
Instrumental by Homage
• Free Chill Storytellin... - ยานยนต์และพาหนะ
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 7](http://i.ytimg.com/vi/FOIiws4XMGQ/mqdefault.jpg)
Just wanted to let you guys know that I think the relay might have been draining my battery when the car is off since its directly wired to the battery so I re-tapped it into an accessory fuse on the exterior fuse box. If you're not sure how to do this, check out my dashcam video here for the same method of using a fuse tap on an accessory fuse to get power to the lights only when the car is turned on th-cam.com/video/etzweQqOGGc/w-d-xo.html. This example is on the interior fuse box but its the same method for the exterior fuse box
broooo the sequentialsssss make it that much better i LOVE IT
Thanks brother! 🙌🏻
I was really hoping that they were an upgrade to oem. My 2029 Ex lights are not that bright, and I just upgraded the headlights. I really appreciate what you are doing here it looks really cool bu the way. Lots of very helpful information as screw sizes. My upgrades came without any screws. I am having a problem just envisioning how these parts fit together and I am pretty handy. This is serious work, so I am going to just go step by step. I will be removing the bumper. The fuse idea is a great way to go. Thanks again.
2029? Wow. How's the future bud?
Nice!! Thanks for sharing.
I don’t even know how to take the bumper apart. 😂. Nice !!
Nice video brother am gonna install my today I hope everything works for me.
Good luck brother!
For the t tap wire connectors what gauge you used ?
Do you have to adjust The light up and down and How bright is it from the stock one
Can i put light bar instead of crv fog lamp?
Do they have a kit for 2014 crv?
Where did you buy these from? Link?
Cool bro..
Thanks!
Nice install. I got the EX so I'm trying to see if they sell a plug and play version of this led. BTW idk if its just me but the pixels were all messed up on the video? You should add the mirror sequential too i saw them on ebay.
Thanks! I might consider the mirror mod in the future. I think the video quality could be a youtube thing or sometimes the gopro performs really poorly in low light conditions 😅 ill make sure to check that out for future videos if its not a youtube thing 👌🏻
LETS GOOOOO!
LETS GO
Hi,
Do you know by chance if there is a plug-and-play version that I can install on my CR-V EX 2019?
Thanks!
Sorry, I do not have that model so I wouldnt know
Was the interior button for aesthetic purposes? Would it work normally with the normal fog light switch?
He didn’t have OEM fog lights so all the wiring and switch would be new. And yes, you can just tap into your FL wires for power, but you will still need turn signal wire from headlights for seq turn signals
Sorry I might’ve missed this in the video but which ground point did you use?
I just used any nut/fixed bolt in the footwell to the left of the pedals by the interior fuse box. I believe there is only one that was easy to access
Can you do this with out removing the bumper?
I would say its probably possible, but i think removing the bumper will make it way quicker
Where did you get that from bumper ?
OEM part from the dealership
are they very bright night time ?
Honestly, they dont seem to be too much brigher but it could be because my car is lowered and I havent adjusted the beam. I would say it helps with lighting a bit in the sense that its a white light instead of a yellow light, but the lumens are pretty standard of LED blub replacements so I dont know if it would get much brighter than it is
Hey, do these fog lights actually serve the purpose and are bright enough or is more for aesthetics only?
They are just aesthetics for sure. I can barely notice them on the road. If you want fog lights that actually serve the purpose, you would probably have to go for the OEM style ones that are circular and use an actual bulb
@@AnthonyMo forgot to ask, are you able to change out the bulb and these kind of fog lights?
@@JoseHernandez-km1uc It doesnt seem like these can be changed...at least not easily because there is no bulb replacement.
Can I just plug them on the original plug of the car? I can do with the regular lights, I'm not sure I wanna play that much with the wires 😅😅
Yeah you can if the OEM harness fits. I only had to do all this wiring because I didnt have OEM fog lights to begin with (base model). However, you'll still have to tap into the turn signal wire if you want the sequential feature
@@AnthonyMo gotchu, thanks a lot I just got a 2018 Touring and I'm thinking on making some nice stuff, I might do the whole thing but have to rewatch the video couple times. Also I see your crv is lowered, did you use lowering springs? If so, where did you get them?
For that kind of bumper can it fot projector fog?
Should be able to fit any style fog light that fits oem
@@AnthonyMo can i retrofit this kind of led fog because it is weak
what kind of bulb is your low headlight bulb?
H11 Leds
@@AnthonyMo lumens?? Jeje 6000k??
@@thejacobear_93 should be
Is it necessary to remove the fender?
Only if you want to run the wire harness through the fender to the footwell like I did, otherwise you can try to run it through the main firewall
@@AnthonyMo I have a 2018 LX doesn't come with fog lights.. I want to install one.
@@binosh0106I saw just this video. It’s very good. I have a Honda CR-V 2019 LX and I was able to install the regular EX style fog lights aftermarket kit. I had to figure out how to wire everything, connect it to the car battery. Since it’s regular fog light, I didn’t tap into the any wiring for turn light. I didn’t cut the wiring harness to feed through the firewall. I just pushed out the firewall grommet and fed the wire connector through. Then I used a donut grommet to try to cover the hole as much as possible. I used a tap fuse to tap into the car interior fuse box. It all worked great but it was a long day.
How do you can turn the fog lights whit the combination switch?
Could you explain what you mean by combination switch?
@@AnthonyMo the lever in the steering column
@@adalbertodearmas5496 I don't have the model with the steering column switch for a fog light so it would be too complicated for me to add one. If you have one then you can splice into the existing fog light wires. If you do not have one like me, another option is to piggy back the fog light off the head lights but you wouldn't be able to turn them off separately
@@AnthonyMo i found the info and the procedure but it apply for crv 2016 and older ... it is not usefull for us cause the fusebox is not the same