Can you explain why my bolt binds up when trying to use the 9 round magazine. Bolt is unable to be closed and then it is almost impossible to retract the bolt to remove the magazine. Bolt works fine if not using the magazine.
I just received my 250Z 25 cal. It won't feed from either magazine. The bolt will push pellet out of magazine them falls short about 1/4" from fully closing and allowing bolt handle to drop. Then it is almost impossible the retract bolt with out major force applied. The same pellet feed flawlessly from the single shot adapter. Bolt feeds pellets and closes just fine. What is causing this issue?
I just received mine today, went to remove the thread protector and the entire cap of the reservoir is wanting to come off, how tight should that cap be? I have not filled the rifle yet
You should mention that to turn the reg pressure DOWN, the tank pressure needs to be depleted well below the current reg setting, or drained completely. Going UP make no difference. You risk damage to the reg by turning it down while pressurized.....
The 250z will soon be in my arsenal. 👍
Can you explain why my bolt binds up when trying to use the 9 round magazine. Bolt is unable to be closed and then it is almost impossible to retract the bolt to remove the magazine. Bolt works fine if not using the magazine.
I just received my 250Z 25 cal. It won't feed from either magazine. The bolt will push pellet out of magazine them falls short about 1/4" from fully closing and allowing bolt handle to drop. Then it is almost impossible the retract bolt with out major force applied. The same pellet feed flawlessly from the single shot adapter. Bolt feeds pellets and closes just fine. What is causing this issue?
Love it!,Barra1100z. 22 was my 1st pcp and never let me down. Many of groundhogs have been dispatched.
Looks pretty simple!
Not sure I have a castle nut wrench tho haha
I just received mine today, went to remove the thread protector and the entire cap of the reservoir is wanting to come off, how tight should that cap be? I have not filled the rifle yet
is the buffer tube on the 250z a normal thread size or is it proprietary eny help would be nice
Did you ever receive an answer? I'm sure others would be interested also.
Its mil-spec, not sure where i read that but it was somewhere lol
You should mention that to turn the reg pressure DOWN, the tank pressure needs to be depleted well below the current reg setting, or drained completely. Going UP make no difference. You risk damage to the reg by turning it down while pressurized.....
Why is my BARRA not filling?
They didn't tighten bleed screw on top of tank. I had the same issue.
Extremely pathetic QC and CS. They don’t answer phone calls or reply to emails. What a shame as the rifle has big potential.
@ yes so true
Not receiving any help with my rifle issues. I'm thinking of doing a credit card dispute.
This is a shame how you guys sell a product but can’t help your costumers with problem involving your products.