How to Replace Front Brakes 09-10 Pontiac Vibe
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Buy Now!
New Brake Kit from 1AAuto.com 1aau.to/ia/1ABF...
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old front brakes. This video is applicable to the 09, 10 Pontiac Vibe.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/ttq/1AX...
• Phillips Head Screwdriver 1aau.to/ttq/1AX...
• Pry Bar 1aau.to/tcH/1AX...
• 14mm Wrench 1aau.to/tkG/1AX...
• 17mm Wrench 1aau.to/tkG/1AX...
• 14mm Socket 1aau.to/tYh/1AX...
• 21mm Socket 1aau.to/tm2/1AX...
• 1/2 Inch Breaker Bar 1aau.to/teK/1AX...
• Ratchet 1aau.to/tSP/1AX...
• Torque Wrench 1aau.to/tks/1AX...
• Anti-Seize Grease
• Brake Parts Cleaner
• Bungee Cord
• Paper Towels 1aau.to/tgx/1AX...
• Floor Jack 1aau.to/tkI/1AX...
• Jack Stands 1aau.to/tkZ/1AX...
• Large C-Clamp
• Rubber Mallet 1aau.to/tW/1AXA...
• Wire Brush 1aau.to/tbR/1AX...
For More Info visit us at 1aau.to/h/aPk/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I thank God for your videos every time I work on something new
+botson catson Thanks for the feedback!
Caliper bracket bolts 79 ft lbs, caliper bolts 25 ft lbs, wheel lugs 76 ft lbs.
Nice video. I review it every time I fix my breaks. I’ve got an 09 Vibe with the 2.4L engine. The caliper cylinder requires a special tool to twist the cylinder head as it’s pushed in. I can borrow it at my AutoZone store thankfully.
Straightforward and informative - thanks. When pressing the piston back in is it necessary to purge the brake fluid that's been used close to the caliper? Some schools of thought say that this fluid has been compromised by the heating and cooling of the brake assembly.
Thank you Jesus for the helpful videos!
Really missing you check clean grease glide pins. Had four brake jobs in three years, asked my mechanic after the second and third to check and replace if necessary. Turns out my model of car destroys pins and boots. Even at 40k miles for brake jobs is excessive. Pontiac Vibe. Great other than the brakes and drivers seat.
You did not mention to open brake fluid reservoir, before you put C-clamp
+Cemo Maher Thanks for the feedback!
I just changed someone's pads today and forgot. It evidently has some kind of pressure release cap.
It made it to driveway very easily. I also forgot to grease slide pins. I didn't see him do that either so I feel better. I don't do this much any more. It was just a favor. I'm rusty & making those little mistakes.
So, the guide pins are on those last 2 bolts put on correct? I did not see those get greased.
I'm glad tho because I changed someone's pads today and spaced it.
Straight forward wonderful info but you obviously don't live in the rust belt lol nothing is that straight forward in Ohio lol