hi the load-line calibration is better in startad ? , as i understand less is better... me build this processor xeon x5675 motherboard ga-ud3r-x58a rev1 16Gb Ram DDR3 1600 psu 650W 80plus bro gtx 1070
The lower the LLC the better. But it's often better to have a higher LLC and lower voltage, if the voltage delta is big. And it generally is quite sizeable.
I bought an x5650 for $9 and an motherboard for it for $190. I was able to overclock it to 3.8 GHz, but that's as far as she goes without crashing during long gameplay. Still runs games good (especially for the price!!!), but I'm disappointed with the 3.8 (I want at least 4 GHz). If I get an x5670/75/80/90, will I be able to get a better overclock? Thanks for this video man.
That's a great deal price-performance wise! I am 100% sure that your CPU can do 4.2Ghz with decent cooling man. Have you followed my guide? I think the problem lies in RAM OC and RAM related settings, namely the QPIs, try double chwecking does and the secondary settings. Anyway, the best CPU for this socket is the X5675 in my opinion, since every one of them does 4.4Ghz and most do 4.5Ghz!
3.8 is very underwhelming 😒 I can send you my settings for 4.4 on x5650 if you're still running it... Although I have NH D15 keeping it cool. I know from experience that a lesser cooler will struggle to get close to a 4.0.
I would pump up your voltage. I'm running my W3690 on 4.6Ghz on 1.51 voltage. And it has been running for more than 2 years without degrading. I have also an x5675 (i'm experimenting with several cpu's) overclocked to 5Ghz using 1.61v. Yes that is high, but my the cpu seems to be manage it, ands the max temp is arround 80 Celcius. But that is only short peakes. And also at this moment there is no degradation. And even if will be degradaging, the cpu's are very cheap. the x5675 is just about 10 Euro's or 11 Dollars.
Where about does the x5675 hit the wall with qpi link and uncore as I have the x5675 on asus p6x58d-e as it running 3.91ghz with turbo enabled boosting to 4.25ghz @ 1.264v vcore (bios stated 1.27500), 1.26250v qpi/dram core volt
Aren’t the settings shown here working for you? Did you set the QPIs to the lowest possible? Try upping the IMC voltage if nothing works and beware of the Uncore, again
@@ImWateringPSUs i have tried many settings but when i start my pc windows is always freezing. While starting or on desktop. I have 2x 1600mhz and 1x 1333mhz ram. Maybe problem is the ram?
@@ImWateringPSUs Forgot, my bad :) I'm finishing the build, I'll run 3x 140mm + 2x 120mm + 1x200m intake fans, and 2x200m and 1x120mm exhaust fans. What's your thoughts? It's one of those large nzxt black and white towers. The cpu cooler is a single heatsink 6 heat pipes, with 2x140mm fans.
@@ImWateringPSUs got a xeon x5675 cpu and it's currently at 4.4 ghz but i wanted to try to reach 4.5/4.6 to fix some single core performance problems.. temps are fine but for some reason it never quite wanted to be stable on multiple x5675 chips
QPI is important on x58,its not worth running your 6 core xeon or i7 990x at 4.8GTs or lower to get 200Mhz extra on the core,my 990x can still do 4.8Ghz at 1.46vcore with the a little over stock QPI 6.8ish because I used a mix of BCLK and multi that raise the QPI just a little over the stock 6.4GTs an thats after 10 years of serving as a backup PC. Lower the QPI to 4.8 I can get 5.0Ghz but the proformance is lost in real world workloads like gaming. Uncore clocks can have a huge impact as well,I've seen higher gains @ 4.6Ghz with a 3.8Ghz uncore vs 4.8Ghz core with a lower uncore of 3.2Ghz or around there.
From a PC it should be readable ahaha, I’m sorry if the camera angle wasn’t the best, it was one of my first YT videos so the content was good but the filming not so much :p The newer ones are much better!
Can any one tell me how open bios x58 in dell t3500 because when i press dell- f12 it appears different bios . Not like appears in this video. Why ? Any help please
Which settings did you try to with? This is an extensive guide and I'm not just giving out some settings, you should adjust them base on your CPU. I'm sure you can get at least 4.4Ghz with you motherboard and CPU combo by following my guide. 4.6Ghz with high end cooling
@@ImWateringPSUs I'll keep trying buddy, so far I've only reached 4.09 stable, heating I don't think it will be a problem with the 240mm cooler master liquid.
@@ImWateringPSUs i reached 4.4 ghz, i just raised the vcore and the Qpi i left it stressing for 10 minutes with cpu-z and it didn't give blue screen. maybe i will try to reach 4.5, anyway thanks a lot my friend, your tutorial was very helpful.
Hello, I'm writing to you from Argentina. I have a x58 hunazhi with a xeon 5660 and a video card rx550 16 ram ecc can I do OC to this processor. Could you guide me to get the most out of it, I can't do oc to the cpu or the ram memories
![[TH] 2024 PMGC League | Survival Stage วันที่ 1 | PUBG MOBILE Global Championship](http://i.ytimg.com/vi/FVFT-PFwU80/mqdefault.jpg)
hi the load-line calibration is better in startad ?
, as i understand less is better... me build this processor xeon x5675 motherboard ga-ud3r-x58a rev1 16Gb Ram DDR3 1600 psu 650W 80plus bro gtx 1070
The lower the LLC the better. But it's often better to have a higher LLC and lower voltage, if the voltage delta is big. And it generally is quite sizeable.
I bought an x5650 for $9 and an motherboard for it for $190. I was able to overclock it to 3.8 GHz, but that's as far as she goes without crashing during long gameplay. Still runs games good (especially for the price!!!), but I'm disappointed with the 3.8 (I want at least 4 GHz).
If I get an x5670/75/80/90, will I be able to get a better overclock? Thanks for this video man.
That's a great deal price-performance wise! I am 100% sure that your CPU can do 4.2Ghz with decent cooling man. Have you followed my guide? I think the problem lies in RAM OC and RAM related settings, namely the QPIs, try double chwecking does and the secondary settings. Anyway, the best CPU for this socket is the X5675 in my opinion, since every one of them does 4.4Ghz and most do 4.5Ghz!
3.8 is very underwhelming 😒
I can send you my settings for 4.4 on x5650 if you're still running it... Although I have NH D15 keeping it cool. I know from experience that a lesser cooler will struggle to get close to a 4.0.
I personally think that AT LEAST 4Ghz can be achieved on pretty much every one of these xeons tbh
I would pump up your voltage.
I'm running my W3690 on 4.6Ghz on 1.51 voltage.
And it has been running for more than 2 years without degrading.
I have also an x5675 (i'm experimenting with several cpu's) overclocked to 5Ghz using 1.61v.
Yes that is high, but my the cpu seems to be manage it, ands the max temp is arround 80 Celcius.
But that is only short peakes.
And also at this moment there is no degradation.
And even if will be degradaging, the cpu's are very cheap.
the x5675 is just about 10 Euro's or 11 Dollars.
so i did this on the same cpu and a ga-ex58-ds4 and an operating system wouldnt boot (it does post)
Where about does the x5675 hit the wall with qpi link and uncore as I have the x5675 on asus p6x58d-e as it running 3.91ghz with turbo enabled boosting to 4.25ghz @ 1.264v vcore (bios stated 1.27500), 1.26250v qpi/dram core volt
Those are some really nice settings! If you have adequate cooling, I'd push the vCore up to 1.35V easily
wow thats an impressive clock will this work on the asus p6t deluxe?
Yes it will!
@@ImWateringPSUs cool ill have to try it
@@seanobrien7086 Keep us updated!
Some of the power options aren’t in my bios but I’ll see what I can do
@@seanobrien7086 That shouldn't be an issue. At max they'll have different names
Hi, i have gigabyte g1 guerrilla mobo but i can't get stable 4.4ghz on x5660. Can you make a video for daily using stable 4.2+ghz overclock video?
Aren’t the settings shown here working for you? Did you set the QPIs to the lowest possible? Try upping the IMC voltage if nothing works and beware of the Uncore, again
@@ImWateringPSUs i have tried many settings but when i start my pc windows is always freezing. While starting or on desktop. I have 2x 1600mhz and 1x 1333mhz ram. Maybe problem is the ram?
far too high 3.8ghz is best..
Ciao @imwateringpsus ! Do you think i could oc to 4.2 with a decent 6 heatpipes air cooler in a case with decent airflow?
Yes but only if you subscribe! :)
@@ImWateringPSUs Forgot, my bad :)
I'm finishing the build, I'll run 3x 140mm + 2x 120mm + 1x200m intake fans, and 2x200m and 1x120mm exhaust fans. What's your thoughts? It's one of those large nzxt black and white towers.
The cpu cooler is a single heatsink 6 heat pipes, with 2x140mm fans.
@@ImWateringPSUsI didn’t subscribe and my computer exploded
does it work with an intel xeon x5690 on an x58 of the hp z400 workstation?
The method 100% works, but I fear you’d need to either have a modded bios or to use XTU because of the lack of bios settings in the Z400
Dell precision t5500 cam i do on it? Oc?
Cpu temps before oc is 73c .. how can k maintain after oc
Unfortunately the Dell has a locked BIOS
@@ImWateringPSUs Can i unlock bios? From the market or at home? Is it possible to unlock
nice. i got a g1 guerilla here
Sweet man, what CPU are you running and at which clocks?
@@ImWateringPSUs got a xeon x5675 cpu and it's currently at 4.4 ghz but i wanted to try to reach 4.5/4.6 to fix some single core performance problems.. temps are fine but for some reason it never quite wanted to be stable on multiple x5675 chips
@@rayproductionsbackupchanne3862 I'm sure you can get to 4.6Ghz man! Solid OC you have nonetheless ;)
QPI is important on x58,its not worth running your 6 core xeon or i7 990x at 4.8GTs or lower to get 200Mhz extra on the core,my 990x can still do 4.8Ghz at 1.46vcore with the a little over stock QPI 6.8ish because I used a mix of BCLK and multi that raise the QPI just a little over the stock 6.4GTs an thats after 10 years of serving as a backup PC. Lower the QPI to 4.8 I can get 5.0Ghz but the proformance is lost in real world workloads like gaming. Uncore clocks can have a huge impact as well,I've seen higher gains @ 4.6Ghz with a 3.8Ghz uncore vs 4.8Ghz core with a lower uncore of 3.2Ghz or around there.
That's definitely true! But I'd still start as shown in the video to find the max stable frequency: then I'd just tune QPIs and Uncore accordingly
Did you overclock your cpu with hyper treading enabeled?
Just asking bit late my cpu ratio goes to 63.
63 is waaay too high
@@ImWateringPSUs asus board. I have two both go to 63.
how can i read the value on your cpu-z, its too smalllllll
From a PC it should be readable ahaha, I’m sorry if the camera angle wasn’t the best, it was one of my first YT videos so the content was good but the filming not so much :p The newer ones are much better!
Can any one tell me how open bios x58 in dell t3500 because when i press dell- f12 it appears different bios . Not like appears in this video. Why ? Any help please
I think on the dell you might have to hit either Enter, F1 or FN+F1
@@ImWateringPSUs thank you for replying . I appreciate that . I will try and tell you .thanks
Not working with GA-EX58-UD5 and x5690 xC screen blue xC
Which settings did you try to with? This is an extensive guide and I'm not just giving out some settings, you should adjust them base on your CPU. I'm sure you can get at least 4.4Ghz with you motherboard and CPU combo by following my guide. 4.6Ghz with high end cooling
@@ImWateringPSUs I'll keep trying buddy, so far I've only reached 4.09 stable, heating I don't think it will be a problem with the 240mm cooler master liquid.
@@sonek-jw5jc Try to copy the exact settings I used in the guide for the highest frequency, but then set the CPU to 4.4Ghz
@@ImWateringPSUs i reached 4.4 ghz, i just raised the vcore and the Qpi i left it stressing for 10 minutes with cpu-z and it didn't give blue screen. maybe i will try to reach 4.5, anyway thanks a lot my friend, your tutorial was very helpful.
@@sonek-jw5jc I'm glad you managed to make it work in the end! Have a nice day
Noice👍
😂✌️
looks like a x5670 @2.9ghz x22...x5650 is @2.6ghz x20 multi....
The tutorial works for every x58 CPU! For both Xeons and i7, regardless of the model!
Hello, I'm writing to you from Argentina.
I have a x58 hunazhi with a xeon 5660 and a video card rx550 16 ram ecc can I do OC to this processor. Could you guide me to get the most out of it, I can't do oc to the cpu or the ram memories
Just follow the guide! Those huanan motherboards are sometimes locked though, they're not "real" X58!
Wow
:))
Noisy
Nooooiiiissy