LRP Flow Works Team ESC unboxed!
ฝัง
- เผยแพร่เมื่อ 22 ต.ค. 2024
- Here's a look at LRP's top of the line Flow Team Works Electronic Speed Control. LRP is known for their Flow Speedo and winning championships as proven by Steven Hartson this past January at the IFMAR world championships (4wd buggy). This 400amp brushless sensored Speedo pack tons of features and on-board programming for the true racer. An aluminum case and heat sink and included fan will keep temps super low in your 1/10th scale 2wd/4wd vehicle. Motor limit is set to 3.0t (That's FAST!!)
I have this LRP FTW Speedo slotted for my new Team Durango DETC410 and with the help of the the LRP x20 5.5t motor, it will be super quick!
Here's where I got it and some info from LRP:
www.lrp.cc/en/...
www3.towerhobbi...
Here's the link to the USB Bridge:
www.lrp.cc/en/p...
LRP celebrates an impressive comeback with the Flow WorksTeam and Flow Competition high-end brushless speed controls. In two years of hard work LRP did it again: another revolution in brushless technology and a new benchmark in high-performance speed controls is ready to conquer the market.
The new Flow speedos are based on a completely new platform, designed from scratch. They replace the existing three SXX Version 2 speedos. Racers can use the Flow speedos for modified and stock racing, for both classes it offers a multitude of setup options.
Optimised cooling, extremely high power output over the entire RPM range and simple but flexible adjustability are only some of the highlights that make the new LRP Flow speedos stand out. The unique software, a heavy copper 8-layer powerboard and the compact 2-piece machined aluminum housing have been never seen before in a brushless competition speed control. Its construction from thermo-conductive aluminium makes the case highly efficient for cooling. LRP is sure that the success story of the LRP SXX speed controls with their uncountable World, European and National Championship titles will continue with the new LRP Flow. The LRP Flow WorksTeam and Flow Competition are the most powerful LRP brushless speed controls ever. Let the energy flow!
Modified and Stock Racing - All purpose onroad and offroad software for modified and stock classes, incl. boost 0
Multi-mode profile adjustment - 7 fully adjustable parameters for stock and modified: auto brake, feel, torque timing, boost timing, boost angle, boost turbo, cutoff voltage
HD full aluminium case - For lowest core temperature and tough race design
Bulletproof 6V/3A linear BEC
Easysolder U-Tab Design - Heavy copper, multilayer PCB for lowest resistance
X-Brake Pro - New efficient and precise brake software
USB Software Updateability: Benefit from all the latest performance improvements and updates available at www.LRP.cc!
Revolutionary Internal Temp Check System 3 - Allows you to read out the maximum internal temperature for each the speedo and motor
Extra small size - 32x34x21mm for easy installation in all cars
Including plugged high-performance fan
I stand corrected, Rich you never disappoint in Unboxings, New Product info, Upgrades and making scale items. Thanks for all the hard work you put into giving us solid video's
Thanks Johnny for all the great comments! Its people like you that make this all worth it!
Your welcome my friend, you bring much inspiration to rc's
I have it, too. It´s great, very smooth and so easy to program. Hope we will see some running videos soon :-)
Thanks RCHamburg!
Want to see the ESC that 2014 IFMAR World champion, Steven Hartson runs? Check this out!
Glad you gave lrp a try! Really good esc...
Yeah, the specs on this thing are amazing!
Its crazy how small this thing is, 200 amp is nuts :)
Yep! Thanks for watching
Hey u made the choice. That 10scale ESC and sensored is a beast and LRP is my favorite Rc electronics besides novak, anyways hey enjoy
Thanks Socal! They seem to be very nice.
Do you like this esc or the Orion r10 pro more? And what do you run this in? Thanks mike
They're both great ESC's. The racing heritage is awesome with Steven Hartson running the LRP and the Ryan's (Cavalieri and Maifield) running the Orion. The LRP will be making it's debut in the Pro-Line Pro 2 truck for right now
Hey rich are you going to do a build on your new team Durango?
I'm def gonna do build updates and include any issues I ran into on the build
This is regarding the Lpr ix8 esc. I would like to see a video, where you fit the cables step by step. The manual that i have does not show which wire goes where.
I just pulled up the manual for that ESC and it has designation for each wire on the pictures. Obviously +/- are your battery wires and the A/B/C are your motor wires - the motor wires need to sync with your motor to the exact letter vs a sensorless motor, which it doesn't matter which order. Here's a link: www.lrp.cc/en/product/ix8-brushless-speed-control/
Yeah that's the same manual I found ......it only gives the phase amp current which means burst current kind of like a battery pack ....the phase on the competition is spec rated at 223 phase amps but it's a 80amp continuous current .................the work team is 400amp phase I'm assuming it's a 160 to 190 amp continuous but IDK.....RCN videos are extremely helpful thank you for your time..
+S619jensen I think it's safe to say it's between 160-200 continuous. What are you powering? The FWT can power anything 1/10th 2wd and 1/10th 4wd buggies easily with no problem. I've even seen 4wd SCT's being powered by them
+The RCNetwork im running the SCT momba max 1410 but it does not have Blinky mode.....but I'm getting a team associated TC 6.2 so I need a Blinky mode.... And I've always was a LRP fan in the past .....
Hey good choice on esc, I'm a team driver for LRP so of you have any questions just hit me up
Thanks Damian, I may look you up soon!
Damian Van Riper Hi, I have changed the firmware back to 1.1 in the hope of getting reverse. I have redone the initial set up but still no reverse. Any ideas?
:D got the same in my T4 Team C T4 V2 on sand
Nice!
:)
Hey Rich, how do you program that, I have downloaded all I could but it doesn't recognize my esc and later I saw it on the website I doesn't support win8. I have emailed them but no response.
I am assuming that you're in the US. The LRP America office is located on this page with the service email and phone number. Best time to call is weekdays before 4pm: www.lrp-america.com/welcome/ JD is the tech guy you'll want to speak to. I saw also on thier site that Win8 is not supported. You're best bet is to get a hold of another computer at this point or maybe even a buddy's at your track
The RCNetwork thanks for you advise!
The RCNetwork thanks for you advise!
HiDoes it worth buying the usb programming bridge? I heard you mentioning unlocking hidden features? But one guy talked about that timing isn't any good compared with tekin's timing adjustment.. please help and thanks again & always
I think it is.....unless you want to program it via the two buttons and flashing LEDs
Yeah, if you pair it with an X20, there's two additional programming options that only the X20 unlocks
Thanks .. good clear advise . I don't know why some says there's no point of getting one !
Thanks a lot .
7:10 burts , turbo , overclock and full amp
,sadly I use an x12 stock spec, where I am not able to do so
Cool, thanks for the info!
no problem
Can you do a review on the turnigy track star 120a turbo ESC as it is a copy of the r10 pro and I'm wondering how much different it is. Could you also review the track star 540 motors.
I'm not a big Hobby King fan, as I've been burned by them way too many times. Plus, I have the real deal! From what I've heard, they are similar, but Orions are designed in Switzerland and use a bit different software and programming card that the step child turnigy. Also warranty wise, Horizon Hobby in Illinois deals with all warranties for Orion
Best choice I meant
I need some help on the lrp flow competition it rated at 200phase amps and runs 80 amp continuous and 120 amp brief load.......what would be the continuous amp on this esc about 170 to 180 like the takin rsx and the Orion r10.1 esc? I can't get the real specs
+S619jensen Looks like the FWT is about double-ish: www.lrp.cc/fileadmin/lrp_anleitungen/anl_31467_lrp-flow-manual-e.pdf
do u need a fan to use
The fan is optional, but with the 5.5t motor I'll be running, I'll install the fan!
is that ESC for sensor Motors only
I'm sure it can sun a sensorless......but why waste this esc on a sensorless motor?
i bought this speedo and got a locked rotor LED after 2 battery packs. have to send it in to get serviced..
BMOC Yikes! LRP America is located in San Clemente, CA and are super helpful....
The RCNetwork yeah i emailed them and got a reply same day. hope they can fix it if not, replace it for me. hope so!
Yeah, they're cool people there.
got a email today and they are replacing it under warranty. sweet!
i have the similar from NOSRAM brand
Yeah, LRP has lost her way the past several years
I mean I found the specs on the lrp flow competition .....but I can't find the real specs on the lrp flow works team
+S619jensen Check the owners manual here: www.lrp.cc/fileadmin/lrp_anleitungen/anl_31467_lrp-flow-manual-e.pdf
It shows specs of the Comp vs. the FWT.
Did i get you to try this? Hahaha
Possibly! lol I've had my eye on the LRP stuff for a while now. You can't discount all of the World Championships!
Ha! Im sure you will love it! Im a team driver so any questions you have feel free to pm me!
Cool, thanks Mike !
This or a orion r10
r10 160 amp that is.
Not sure, haven't ran the LRP yet.........but I will have a good starting point with the R10-Pro!
Plaease do I am getting a B44.2 in about 3 days so any info ASAP would be great. though I do see he ae guys that aren't sponsored by Orion or other brands running Lrp for esc reedy for motor!!
The B44.2 is a great 4wd buggy! The Team drivers for AE are pretty much locked into Reedy motor and LRP Flow Speedos. That's pretty much what Hartson runs. Cavalieri runs for Team Orion, so he's doing the R10 Pro combo
Then i'll probablly go orion esc reedy 6.0