Dont Trip DH Cybin Review
ฝัง
- เผยแพร่เมื่อ 29 เม.ย. 2023
- PLEASE READ THE MANUFACTURERS COMMENT BELOW! IT IS PINNED! I messed up when I made my comment about the quality of the aluminum. I took for granted that a friend of mine had legit information, and didn't fact check it while editing. I am sincerely sorry.
Nice job on the vid Owen, Thank You. just a couple notes, i use Aircraft Aluminum 6061-T6, definitly not cutting cost on Materials. I also changed the inserts that come stock from WFB to APS 95a for better rebound. Also Riptide made new molds on the Kores and they have a better fit now.
Wow, I haven’t thought about longboarding in years, or touched a board other then my trusty Dinghy I keep in my trunk. Brought me back to the silverfish days, ‘twas a simpler time.
To pop out the insert bushing i just get a little bit of vegetable oil and dab a little in there. I give it a little wiggle, then give the hanger a little pull up the kingpin. When i push it back down it usually pops out first time. Sometimes a lil wiggle is required when pushing the hanger back down. Then i just whip all the oil out and clean.
Great review. Definitely lots of pros and cons to consider with all the adjustment options. I've tried Mollys and Slalocybins briefly. I don't think trucks with insert bushings are for me. Ended up going back to Valkyrie Mk3's. Simple, consistent, and high quality.
Killer review. Interesting to learn all that was to learn about the spherical bearing and your preferred use in your setup. Thanks dude!
I got a set of hakis, would highly recommend using venom inserts. The riptide inserts feel a bit loose and wear a lot faster from my experience
Yes, more visibility for true wheelbase as opposed to board wb. I wish truck companies would specify a lot more of their specs such as height, wheelbase change from the mounting holes, and bushing seat so that we can make better informed purchasing decisions. Height especially I believe is a really important measure of how a truck is going to perform, and lower is better because it is a lot easier to add risers than it is to bore flush mounts into your deck.
I can't even see that bushing seat it's so shallow! I'm an old geezer at this point but my buzzed trucks swallow the entire small diameter of a riptide chubby no problem. I've just been getting back into the gear reviews and stuff mostly for nostalgia but it is WILD to see these modern set ups. I've ridden boards that were like an extra foot longer and trucks that no joke were double the width of some of these modern dh trucks. I can just about recollect P-Swiss talking about running slalom set ups for Maryhill but people thought he was crazy back then. I really wanna make retrospect doc on how the dh scene and the gear has changed the last 20 ish years.
I bought DT Skate, I bought 5 sets of different trucks from Mark, thanks mark, I have since bought 2 more poppies for LDP, I like Zenit boards, great company,
I run the D.H. Cybins currently have been for awhile. Your review is absolutely spot on for how my experience has been with them.
like 191, just discovered you today
Just what I needed. Thank you. Love the downhill254 tshirt
nice vid! super informative!
Another sick video man, you genuinely make unique content that the DH community needs! I’ve recently got some mollys and was wondering if u know how those compare to the dh cybins?
Great review! how do you think the Don't Trip Danger Danes Pro model would compare. Which has a the spherical bushing in the pivot cup and a urethane in the insert bushing.
Hey, I’d love you do a vid explaining the oversteer and understeer stuff and how you adjust that.
Great video...great review. Quick question, do you bore out the hanger side of the bushings when using a spherical bearing in the hanger? I think that may be more of slalom thing, I never knew about it until i got a sk8kings modified Bennett with the spherical in the hanger and they did this. I also have DT Bhanger front slalom truck/Slalocybin rear that came with the bushings already bored out (I think). Probably doing that would make them a little too twitchy for DH, but I was jus wondering if you have tried them like that. It also makes the bushings feel much softer. I have a Haki front/DH cybin rear set up for DH/Freeride but have never tried the sphericals in them, just the Riptide and Venom inserts.
Have you thought about making tier lists?
Watching right now. I'm not really a DT guy, but into LDP. I just got Slalocybins for my top mount pumper, was curious to see how they compared to these. You ever mess with any distance riding?
Sick video! I have had that clunky noise in the baseplate when I lean come and go on my Mollys, and heard it in a friend’s set. I think it was caused by over tightening the angle adjustment dudes but I could be wrong. Have you experienced it much since this video? Cheers