As always, useful informations are in the video description!! /More video about my Colt 1911 A1/ MY NEW AIRSOFT PISTOL (Colt 1911): (review + first chronograph test) th-cam.com/video/FDilkwE1k4c/w-d-xo.html FPS Upgrade on Airsoft Colt 1911 A1 Spring Pistol [Penetration Test and Assembly] th-cam.com/video/jNlzufPQZGw/w-d-xo.html Chronograph Test for Future Colt 1911 A1 HPA Videos (double spring) th-cam.com/video/4cn1U1zUIJU/w-d-xo.html TRIGGER SEAR Upgrade on Airsoft Colt 1911 A1 Spring Pistol th-cam.com/video/MrbooCU-j3g/w-d-xo.html
my airgun is bolt action.. figure the breech is at somewher are 4500 psi (blow airsoft apart but given green gas is just scented propane its 100 psi.. which is why the plastic holds up.. my breech is steel so I get 27 grain pellets up to 1600 fps... and yes I had to register it as a fire arm and get my license
This is one of those vids that is so satisfying to watch over and over. The mods WORK, the mod-er (you!) knows that they're doing, there's no annoying music or extraneous crap in the vid and it's just gun, disassemble, mod, assemble, shoot, show results. PS I hadn't realized you had so many vids on your channel. I clicked on "From Airsoft vs Everything" , and went 'Woah!" lol Now all I gotta do is find a shop here that stocks that Cybergun 1911. Have you found any other brands that also have a steel slide? That seems to be a totally crucial factor. Great stuff! Thanks for sharing! 👍
@@JohnCaleb-f1z I don't really want to torture the inside parts with stronger spring, I don't want to destroy this 1911 because its my favourite springer. With M150 spring, it have a chance something would break. 306fps (/0,20gbb) is still a lot for a springer pistol.
Just a note, spring power does not only depends on the wire diameter (thicker = stronger) but also spring diameter (smaller = stronger), distance between coils (further = better), and spring length/travel distance (smaller = stronger). The M135 spring has considerably thicker wire but its distance between coils is shorter than the original spring. This makes the new m135 spring not giving much better result.
With this spring I can reach around 480fps in my m24. So the small difference in this case is not the fault of the spring. Cylinder air volume is not that much. If I were able to put a m190 spring into the pistol, Im sure fps still would be under 350fps.
@@airsoftvseverythingYou can add rubber spacers to the spring guide and/or the piston to get a little more power and dampen the shock from the stronger spring. Since adding weight to the piston would make it heavier and a little slower, I think it's best to have 2 thin spacers on both the spring guide and the piston.
@@pinkoball4165 Yep. You can lubricate the trigger sears, under the slide, piston rubber + barrel cleaning. And yeah, it just a cheap springer, but its not a lot of time to maintian it for a longer lifetime. (~5min proccess)
Essa 1911 Airsoft... Pode Chegar a 400 FPS Utilizando Uma Mola De 2 mm. Não Sei Quanto Tempo... Os Componentes Internos Suportam Essa Pressão. Mas Ver Um Airsoft Com a Potência De Uma Airgun é Simplesmente Incrível!!!
Consegui Realizar Esse Upgrade... E o Resultado Final Foi Incrível. Com Bbs 0.20 a 1911 Atingiu 1,4 Joule Com Disparos Atingindo 70 Metros De Distância!!! Ela Também Consegue Atravessar Latas De Cerveja Com BBS 0.20 é Quase Surreal Pra Uma Airsoft Spring!!! Passarei a Utilizar Bbs 0.28... Pois a 0.20 Se Tornou Leve Demais Pra Ela!!!
@@airsoftvseverything Não... Mas Fazer Upgrades Em Airsofts é Meu Hobby. Tenho Outras Airsofts Modificadas... E Todas Tendo Pelo Menos o Dobro Da Potência Original. Pois Fazer Bons Disparos a 50 Metros Com Uma Airsoft é Muito Divertido.... Esse é o Fato.
@@Zvaigzne86 If you ask this question, I think, you should cancel this hopup project. I mean, its possible to convert fixed hopup to adjustable hopup at home. (with homemade sollutions) but you cant just buy a hopup unit and put it into the pistol.
@@Zvaigzne86 It would definitely help. (Around 100-150% more range) Anyway, you just need: (the easiest way) - short AEG barrel - an AEG hopup rubber - screewdriver, knife - drill - thread cutter - 1 small crew - some kind of glue 💁
the O-ring modification - am i right in thinking its function is to help press out the flared portion of the plunger thingy against the surrounding cylinder wall?
I have the Black and Silver dual tone version and upgraded it by adding a second spring. My question is. How long would the plastic stuff last if decided to add a stronger spring to it?
I can't tell you this exactly. It will worn out faster. I have trigger sear upgrade video in the description. Check it out and try to make that.. With it, you dont really have to worry about the worn out.
@@hieuvuminh8761 the body and inside parts are plastic, thats why I needed the sear upgrade. I usually using it in videos, and sometimes just for fun at home. Maybe 10 shots/week. I have 8 pistols, hard to choose between them 😁
@@airsoftvseverything Yeah buddy. I saw it five minutes ago. I found it. We have the same gun and tomorrow I am having a live show on instagram where I'll explain in Italian how it works and my personal thoughts if it's worth using in game or not.
Air pump pusher is the one that always break because of it hooks to the trigger with much pressure. Any tips on how to upgrade or improve thaat? My air pump pusher is just made of 3d printing because the original is broken.
1, You cannot compress the spring that much, so the trigger sear will not catch the piston. (Cut 1,5cm down with angle grinder.) 2, No, it will not damage anything. (If the longer spring is usable too in your gun)
@@airsoftvseverything the stock spring of my glock17 is 1MM thickness. 7.5CM length 13MM outer diameter.. Im planning to upgrade to 1.3MM thickness and 8.5CM lenght.. Hoping the new spring will add fps
@@tylerurijah If you check my upgrade videos, every upgrade spring are shorter. You will not be able to cock your gun with that new spring. (m135 sniper spring has 1,3mm wire thickness for reference which is in my colt 1911 a1 pistol)
@@airsoftvseverything best solution is to cut the upgraded spring to the same length of the stock spring. And also good air compression of piston and chamber. Without your upgrade videos i wouldnt be able to upgrade my pistol..
@@tylerurijah Thats why I making these videos, for helping people. First, dont cut anything, just put in and check, sear is able to catch the piston or not. If not, cut 0.5cm down, and check it again. If not, just repeat it, cut 0.5cm again and check. Its a time consuming proccess.
modificar una pistola de spring es sencilla la verdad, si cuentas con resortes compatibles puedes modificar a tu gusto, pero acuerdate que las modificaciones en general se basan en: Potencia Cadencia Alcance Precisión Durabilidad Capacidad estirar el resorte mejora temporalmente la potencia mas no la durabilidad, conseguir un resorte menos fuerte aumenta la cadencia pero puede perder potencia y alcance, conseguir un resorte mas fuerte puede mejorar la potencia y alcance, pero puede afectar la durabilidad a largo plazo, estriar el cañon por interno es muy útil para mejorar su precisión y alcance...acuerdense que las replicas de airsoft en general son de ánima lisa en cuanto a cañon, estriarlo de forma parcial mejora su precisión y alcance y no afecta la durabilidad. Esto lo se ya que tuve una pistola M1911 de la marca Golden Eagle y ha sido una de mis mejores pistolas en partidas, su potencia de 300 FPS con bbs de 0.20 y cañon estriado parecia un sniper de bolsillo, una maravilla de pistola
@@profesorplazas un taladro con una varilla enroscada de diámetro de 6mm, no usen el taladro en si, solo la varilla, girarla despacio y con algo de fuerza, solo puede llegar hasta un 25% del cañon, pero con eso es suficiente para incrementar su precisión, yo hacía eso para corregir la salida de disparo, a mi me funcionó y me dio mejor alcance y precisión, no aplica esta tecnica en replicas de gas, spring de marca o AEG, esto solo se aplica a pistolas, carabinas y escopetas de spring pero de los chinos. Nota: -no estriarlo por completo, el cañon se puede malograr. -el estriado es a medias, ya que la bb necesita algo de presión y algo de anima lisa, estriarla por completo debilita la potencia de la pistola -necesitarás aceite multi usos para lubricar el cañon de vez en cuando eso aumenta la velocidad de salida y de paso evita que se trabe. - siempre hazle una mejora a las miras de hierro a las pistolas de muelle, mejorara significativamente el apuntado, pintarlas con un corrector blanco siempre funciona. Revisa de vez en cuando el cilindro de la pistola, si se desgasta, te verás obligado a reforzarlo, asi prevenimos desgaste y mal funcionamiento de la pistola.
@@Osprey_exe Mil gracias por el consejo... Se puede modificar el hop up, aun si es fijo ? Sé que tampoco se le puede exigir mucho a estas pistolitas chinas, pero probar no cuesta nada ! :)
Is your airsoft A hard plastic or alloy/full metal? So if the airsoft is a full metal won't this brake the gun in a strong/long spring?like the spring on your sniper without cutting it?
This pistol have metal slide, metal barrel and metal spring stop, other parts are made from abs plastic. My pistol is still working fine, so no, Im not afraid. Without cutting, spring will not fit into the gun.
@@johnbottcher_g I used 7mm sniper spring in my spring pistol (in the video) I don't know what your spring AR uses, but if you can measure the outside and inside diameter of your AR spring, maybe I can help which spring would be good for you.
Is there a reason why a very stiff spring alone is not feasible to launch a BB? Is it necessary to convert the spring energy to compressed air energy? Is there some law in physics that limits the speed at which a compressed spring can decompress? I'm imagining a device that is much stronger than a plastic gun housing, but I can't imagine why no one has done this. Do you know the answer?
- How would you put a strong spring into the barrel which is 6mm in diameter? - How would you hold the BB in straight line when you fire the gun? - How would you spin the bb in front of the spring for 50-70meter range? (hopup effect) So yeah, its quite neccessary to convert the spring energy. Its not working only with the spring, that's why noone did this, and noone will do this. (I like your question tho, its great!)
@@airsoftvseverything Thank you for your reply and insight. I have a crude idea that involves holding the bb in the breach of a free sliding barrel with weak magnets. The barrel and the bb will both launch forward as the attached spring decompresses. As the entire assembly stops suddenly, the bb’s inertia will overcome the magnetic resistance and carry it through the barrel. This is one idea that doesn’t account for the hopup effect. I expect it will launch but not very well. I’m going to post a drawing to my channel as I know that my description is inadequate. I was planning on experimenting with this before I asked you. I have confidence that you are right, but I’m curious to try it nonetheless. Thanks again for your reply.
@@MrLBDude Found it. Interesting drawing and "imagination". But I still believe, it will not work as good as you think and planned. Will you ever bulid this? If yes, I really would like to watch. (I see you tagged me on your post, but I didnt get notification)
@@tylerurijahAre you sure piston head seal is bad? Before you put an o-ring on it, please check the nozzle-hopup connection too. Usually, thats an another problematic place in these pistols
hey, i have a spring but polymer m1911 from kwc, is there any chance of making the shots straighter because mine as a fixed hopup and i dont like, is it possible?
@@dagnisn8378 Hi! Try to disassemble the pistol, and check the hopup rubber and try to adjust the rubber a bit. It may just twisted. The other way... if you have good skills, you can buy a short or cheap copper AEG barrel + hopup rubber, and put it in the pistol. Its possible with a few modification.
@@tylerurijah Nope, stock spring inner diameter is 9,3mm. M135 spring inner diameter is 7,8mm. You can modify the original spring guide but I rather made a new one from a bolt.
@@alejarkor I got it on airsoftpro.cz, but its out of stock now. Try to search on: "M135 7mm sniper spring" (VSR10 spring) This is a sniper rifle spring, and you need to cut it 4-7mm shorter than the original spring in your pistol
@@airsoftvseverything Well then whip something up! Show me how to upgrade those sears and put a put a real Glock 19 spring in this thing. Let’s get it up to 500
so-so Accuracy test: 15m th-cam.com/video/d8zDZusIf9A/w-d-xo.htmlsi=kiHuaa1kuADorSMF (I have more accuracy tests on my channel in case you wanna compare this pistol to others)
@@wesak777 Hi! You too! I bought it on catus.sk, but as I see its unavailable now. Easier if you search on the pistol name on the internet and you will find the best shop for you. Pistol name: "Cybergun Colt 1911 A1 HPA" metal slide, spring pistol.
Hi, brother. Something interesting would be the inclusion of a larger barrel. The volume of air produced inside the cylinder tends to be greater than the volume of air the barrel holds. This percentage of air that exceeds the volume of the barrel is expelled after the BBs exit. Incredibly, this extra air volume that is lost has greater compression power. I have a gun like that and I know there's no way to change the barrel, because the hop-up is fixed, but you can thread the outer barrel of the gun and attach a mock suppressor, it will certainly increase the FPS. Because with a larger barrel, the compressed air will be fully utilized.
Will an M140 spring work? I'm just anxious what if it broke but, I'm still confident that my gun can handle it my pistol is m1911 tactics takedown version it has a metal slide also but the cylinder is plastic and some of the parts of my gun is metal alloy, will M140 sping will work?
50-50%, but I think, it will work. But do it on your own risk.. First, you have to reinforce the piston with steel sheet. I have a video link in my pinned comment. Check it, please! Without it, don't try the M140 upgrade. (If your trigger sear is plastic, reinforcement is needed too..)
I did upgrade my trigger though and I'm currently waiting for my spring to arrive HEHEHEHEh I'm not really familiar with this brand or the company but it says marui M1911A it's made from tokyo
Hi, thank you for this tutorial. Do you think some plastic may wear out faster since you are using a stiffer spring? I'm plaining to do the same with my M92 from KWC and my Cybergun MP40, but before I will do the sear upgrade as your another video.
Hi. Yes. The end of the pistol (spring stop) may break down with the stronger spring if its made out of plastic. Piston and the piston catcher are the weakest place without upgrade, so if you make the upgrade, I don't think, anything can go wrong with a bit stronger spring.
Nice and interesting videos you're making! But shouldn't have the 135 spring given considerably more power? 140 m/s should be around 2 joules, so 135 m/s should be around there as well, shouldn't it?
Thanks! Its a good question. Firstly, it isn't a full size m135 spring (in lenght). Furthermore, pistol have small cylinder size. Airsoft sniper replicas have 6-7 times bigger cylinder volume than this pistol.
I'm from Europe. I don't know shops in your region. But I think, you cant buy these kind of pistols in your country, I say this, because already few of my viewers asked /and complained/ about these pistols are not available in Asia)
I Have Special Combat Colt BB Gun, But It Shoots Metal BBs And Its Witth The CO2 Tank, But I Guess You Have The Tank To Because With Only Spring ID ont Know If It Would Hit Them Shots Like That, But The Spring Looked Really Hard Wich Is Good. Overall , Good Video, Can You Do Video On My Gun? Its A Mettal Alloy One, Not Plastttic One, I Had The Plastic One, But I Gave It To My Friend And He Lost It Somehow, Now I Bought The Special Combat 1911 Colt.
@@krisraps You have 4,5mm bb gun which shoots metal bbs. What you can see in the video, it's a 6mm airsoft gun which shoots plastic bbs. Yours and mine are not in the same category. You can't use it on airsoft fileds, I can.
I wanna know what country is that airsoft made from because it has a different mechanism inside comparing to the once im using made from Thailand or Taiwan or China im not sure... Tell me where is that made from Thank you...
I will sell 2j asg gun 460fps with 5 co2 capsules In very good condition(Heckler Koch HK45 GNB) also quick note pls dont do Videos that show like after 2 months do just instead cant wait to see
You weren't even shooting the can with tha gun in the shot you can see the plastic bb come from two different places above the gun on first shot 1.16 below on second shot 1.19 thanks for wasting my time.
Are you serious? What you saw is the bb bouncing back with every shots from the can. (Bouncing upwards, and bouncing downwards) Bro, this is not a fake channel with fake upgrades 💁
@@Greenbear39 I checked your time stamps, those are "bb ricochets" from the can. Anyway, I have a lot of video proofs, my Colt 1911 (spring pistol) is above 300fps with the tuning spring. You too!
If you from europe, try this. (you need to cut it) airsoftpro.cz/en/gun-parts-upgrade/sniper-rifles-parts/springs-for-rifles/7mm-upgrade-pruzina-pro-pusky-m140-460-fps-detail
![FPS Upgrade on Airsoft Colt 1911 A1 Spring Pistol [Penetration Test and Assembly]](http://i.ytimg.com/vi/jNlzufPQZGw/mqdefault.jpg)
As always, useful informations are in the video description!!
/More video about my Colt 1911 A1/
MY NEW AIRSOFT PISTOL (Colt 1911):
(review + first chronograph test)
th-cam.com/video/FDilkwE1k4c/w-d-xo.html
FPS Upgrade on Airsoft Colt 1911 A1 Spring Pistol [Penetration Test and Assembly]
th-cam.com/video/jNlzufPQZGw/w-d-xo.html
Chronograph Test for Future Colt 1911 A1 HPA Videos (double spring)
th-cam.com/video/4cn1U1zUIJU/w-d-xo.html
TRIGGER SEAR Upgrade on Airsoft Colt 1911 A1 Spring Pistol
th-cam.com/video/MrbooCU-j3g/w-d-xo.html
I'm taking note on the O-ring upgrade, I knew those pistons never really pushed that hard against the walls of the chamber.
my airgun is bolt action.. figure the breech is at somewher are 4500 psi (blow airsoft apart but given green gas is just scented propane its 100 psi.. which is why the plastic holds up.. my breech is steel so I get 27 grain pellets up to 1600 fps... and yes I had to register it as a fire arm and get my license
where can i find this oring
@@gango5040 any hardware store
I did this with my 5 dollar spring loaded gun and now its so powerfull and accurate broo
@@justmitaka4039 Enjoy it, mate!
thanks dude i put a O ring in my Spring type Berreta M9 and it shoots so much further
Good air seal is important! :) Im glad, my video helped you.
@@airsoftvseverything the only problem is that the slide locks back whenever i load, but thats ok
@@ImClimbingA_Tree whats your pistol brand?
@@airsoftvseverything HFC Abs plastic metal insides Berreta M9
Where can you buy O ring?
@3:04 i tried this and it has a leaking in the nozzle tip - hop up connection. I cant find a solution to this problem here in youtube
you can buy really small o-rings, and you can glue to the end of the nozzle as an extension. It may solve your problem.
@@airsoftvseverything ive tried this but still there is leaking
This is one of those vids that is so satisfying to watch over and over. The mods WORK, the mod-er (you!) knows that they're doing, there's no annoying music or extraneous crap in the vid and it's just gun, disassemble, mod, assemble, shoot, show results. PS I hadn't realized you had so many vids on your channel. I clicked on "From Airsoft vs Everything" , and went 'Woah!" lol Now all I gotta do is find a shop here that stocks that Cybergun 1911. Have you found any other brands that also have a steel slide? That seems to be a totally crucial factor. Great stuff! Thanks for sharing! 👍
Thanks mate! :)
I have more than 400 airsoft videos on my channel.
Yeah, some "Well 1911" have metal slide too. (springer)
Just bought 6mm steel bbs for mine hope they work well havent seen any videos about them with this gun
You will be dissappointed, pistol is not strong enough for the steel bbs. Too heavy. Steel bbs are "good" at least 680fps or above
What if...
You use the m135 spring and add the smaller spring inside it so it becomes more powerfull
@@JohnCaleb-f1z or what if I just swap the m135 spring to a m150?
@@airsoftvseverythingyeah how bout that?
@@JohnCaleb-f1z I don't really want to torture the inside parts with stronger spring, I don't want to destroy this 1911 because its my favourite springer.
With M150 spring, it have a chance something would break. 306fps (/0,20gbb) is still a lot for a springer pistol.
@@airsoftvseverything oh alright then it's your choice tho I cant control you
@@JohnCaleb-f1z At some point, I have to stop the upgrading experiments. I need a working gun, not a broken one 🙂
Keep up the good work sir
Thank you! 🙂
Does it increase the accuracy?
@@ugerst No, increasing fps don't increase accuracy.
Accuracy is the job of the hopup system. Pistol have fixed hopup.
Just a note, spring power does not only depends on the wire diameter (thicker = stronger) but also spring diameter (smaller = stronger), distance between coils (further = better), and spring length/travel distance (smaller = stronger). The M135 spring has considerably thicker wire but its distance between coils is shorter than the original spring. This makes the new m135 spring not giving much better result.
With this spring I can reach around 480fps in my m24. So the small difference in this case is not the fault of the spring. Cylinder air volume is not that much. If I were able to put a m190 spring into the pistol, Im sure fps still would be under 350fps.
@@airsoftvseverythingYou can add rubber spacers to the spring guide and/or the piston to get a little more power and dampen the shock from the stronger spring. Since adding weight to the piston would make it heavier and a little slower, I think it's best to have 2 thin spacers on both the spring guide and the piston.
@@ashnguyen2950 sadly, I cant add more things, theres no more space in the cylinder. I will not be able to cock the gun if I add something to it.
Can you ubrade au walther ppq spring ? Full métal
"Full metal" is just a thing, inside is not metal, its a poor quality plastic... so, I would say, yes, but not much.
Where possibile ti buy thise soring for gun 135m/sec?
airsoftpro.cz/en/gun-parts-upgrade/sniper-rifles-parts/springs-for-rifles/7mm-upgrade-pruzina-pro-pusky-m140-460-fps-detail
Do I need to maintain a spring pistol like this? Like greasing and all.
@@pinkoball4165 Yep. You can lubricate the trigger sears, under the slide, piston rubber + barrel cleaning.
And yeah, it just a cheap springer, but its not a lot of time to maintian it for a longer lifetime. (~5min proccess)
Metal piston..??
No, its plastic
Essa 1911 Airsoft... Pode Chegar a 400 FPS Utilizando Uma Mola De 2 mm.
Não Sei Quanto Tempo... Os Componentes Internos Suportam Essa Pressão.
Mas Ver Um Airsoft Com a Potência De Uma Airgun é Simplesmente Incrível!!!
400fps is not possible
Consegui Realizar Esse Upgrade... E o Resultado Final Foi Incrível.
Com Bbs 0.20 a 1911 Atingiu 1,4 Joule Com Disparos Atingindo 70 Metros De Distância!!!
Ela Também Consegue Atravessar Latas De Cerveja Com BBS 0.20 é Quase Surreal Pra Uma Airsoft Spring!!!
Passarei a Utilizar Bbs 0.28... Pois a 0.20 Se Tornou Leve Demais Pra Ela!!!
@@Steven.G.Rogers Could you make a short video and link it here?
@@airsoftvseverything Não... Mas Fazer Upgrades Em Airsofts é Meu Hobby.
Tenho Outras Airsofts Modificadas... E Todas Tendo Pelo Menos o Dobro Da Potência Original.
Pois Fazer Bons Disparos a 50 Metros Com Uma Airsoft é Muito Divertido.... Esse é o Fato.
what do you think, is it possible to put on a hopup, onto a spring pistol?
@@Zvaigzne86 Yes, its 100% possible.
(if you have the right tools)
How do i know what hopup to get?
@@Zvaigzne86 If you ask this question, I think, you should cancel this hopup project.
I mean, its possible to convert fixed hopup to adjustable hopup at home. (with homemade sollutions) but you cant just buy a hopup unit and put it into the pistol.
Ah XD, was just thinking how much would it help, for a low powered pistol. Thank you for the reply though!
@@Zvaigzne86 It would definitely help. (Around 100-150% more range)
Anyway, you just need: (the easiest way)
- short AEG barrel
- an AEG hopup rubber
- screewdriver, knife
- drill
- thread cutter
- 1 small crew
- some kind of glue
💁
M135 spring is that 1.5mm thickness?
1,3mm wire thickness
The piston housing of your pistol is fixed into the barrel?. Wow ..here in asia we dontnhave that . barrel and piston are apart...
No, I can disassembe it. Thats an older and cheaper system what your pistol have in your country.
@@airsoftvseverything yeah old and cheap system here of pistols. The piston chamber is the one that pushes/loads the bbs to the hop..
@@tylerurijah Yes, I have that kind of spring pistol 13 years ago 😄
@@airsoftvseverything is it still working till now?
@@tylerurijah no, piston catcher broke down.
K35 can upgrade m135 spring?
not really, full plastic
I bought k35 metal alloy so i can put m135 spring? Or i will change the piston hook to metal?
You definitely need to upgrade your piston
the O-ring modification - am i right in thinking its function is to help press out the flared portion of the plunger thingy against the surrounding cylinder wall?
Right.
nice colt but if u upgrade u need white colt black grip like glock bb
@@motoraptorvlog4985 Thanks! With white grip it will gain +40fps? 😁
I have the Black and Silver dual tone version and upgraded it by adding a second spring.
My question is.
How long would the plastic stuff last if decided to add a stronger spring to it?
I can't tell you this exactly. It will worn out faster. I have trigger sear upgrade video in the description. Check it out and try to make that.. With it, you dont really have to worry about the worn out.
How much it is?
~30 Euro
@@airsoftvseverything with shipping to Indonesia and tax how much it is?
@@muhammadfiqriindrasentana7991 good question
@@airsoftvseverything how to send it and tax? Have you ever been sale to other country?
@@muhammadfiqriindrasentana7991 Im not a seller
Why dont you make a tutorial on how to upgrade the glock q1?
Because, I dont have glock q1 💁 Here, its not available.
what a shame. does this colt has any metal part ?
like metal piston or something?
@@hieuvuminh8761 barrel, upper slide and spring stop is metal, others are plastic.
@@airsoftvseverything so the whole bolt and body are just plastic. and yet they could last a m135 spring ?, do you use the gun often ?
@@hieuvuminh8761 the body and inside parts are plastic, thats why I needed the sear upgrade. I usually using it in videos, and sometimes just for fun at home. Maybe 10 shots/week. I have 8 pistols, hard to choose between them 😁
Shopee link please
www.catus-airsoft.eu/airsoft-pistol-manualna-colt-1911-a1-hpa-kovovy-zaver-cybergun/silver
Have you upgraded the lower pin of the piston by reinforcing it with a piece of metal right?
Yes, I upgraded it.
I have video on my channel about it.
@@airsoftvseverything Yeah buddy. I saw it five minutes ago. I found it. We have the same gun and tomorrow I am having a live show on instagram where I'll explain in Italian how it works and my personal thoughts if it's worth using in game or not.
I don't think, this pistol is good for playing. Rather background fun/shooting. But in some kind of gamestyle, it can be good.
Thinking about upgrading ad well and probably gonna give it to a friend
Please, be careful when upgrading!
Can the cylinder with a foam to cushion the impact handle M150 spring?
It can but it will not last long because thats a really soft foam.
Anyway, M150 is too much in a spring gun.
This upgrade works on any type of spring guns right?
After you make the "trigger sear upgrade", yes.
(link is in the video description)
Air pump pusher is the one that always break because of it hooks to the trigger with much pressure. Any tips on how to upgrade or improve thaat? My air pump pusher is just made of 3d printing because the original is broken.
@@SCP-09669Z Please, check this video. It will answer your question. (hopefully)
th-cam.com/video/MrbooCU-j3g/w-d-xo.html
What if the upgraded spring is longer about 1.5cm in length compard to the stock/original spring?. Will it break or cause damage to the piston?
1,
You cannot compress the spring that much, so the trigger sear will not catch the piston.
(Cut 1,5cm down with angle grinder.)
2,
No, it will not damage anything.
(If the longer spring is usable too in your gun)
@@airsoftvseverything the stock spring of my glock17 is 1MM thickness. 7.5CM length 13MM outer diameter.. Im planning to upgrade to 1.3MM thickness and 8.5CM lenght.. Hoping the new spring will add fps
@@tylerurijah If you check my upgrade videos, every upgrade spring are shorter.
You will not be able to cock your gun with that new spring.
(m135 sniper spring has 1,3mm wire thickness for reference which is in my colt 1911 a1 pistol)
@@airsoftvseverything best solution is to cut the upgraded spring to the same length of the stock spring. And also good air compression of piston and chamber. Without your upgrade videos i wouldnt be able to upgrade my pistol..
@@tylerurijah Thats why I making these videos, for helping people.
First, dont cut anything, just put in and check, sear is able to catch the piston or not. If not, cut 0.5cm down, and check it again. If not, just repeat it, cut 0.5cm again and check. Its a time consuming proccess.
Do i need any aditional upgrades to have a heavy spring?
Yep, trigger sear reinforcement is recommended.
You can find that link in my pinned comment, or in the video description.
modificar una pistola de spring es sencilla la verdad, si cuentas con resortes compatibles puedes modificar a tu gusto, pero acuerdate que las modificaciones en general se basan en:
Potencia
Cadencia
Alcance
Precisión
Durabilidad
Capacidad
estirar el resorte mejora temporalmente la potencia mas no la durabilidad, conseguir un resorte menos fuerte aumenta la cadencia pero puede perder potencia y alcance, conseguir un resorte mas fuerte puede mejorar la potencia y alcance, pero puede afectar la durabilidad a largo plazo, estriar el cañon por interno es muy útil para mejorar su precisión y alcance...acuerdense que las replicas de airsoft en general son de ánima lisa en cuanto a cañon, estriarlo de forma parcial mejora su precisión y alcance y no afecta la durabilidad. Esto lo se ya que tuve una pistola M1911 de la marca Golden Eagle y ha sido una de mis mejores pistolas en partidas, su potencia de 300 FPS con bbs de 0.20 y cañon estriado parecia un sniper de bolsillo, una maravilla de pistola
Cómo estrías el cañón por dentro ?
@@profesorplazas un taladro con una varilla enroscada de diámetro de 6mm, no usen el taladro en si, solo la varilla, girarla despacio y con algo de fuerza, solo puede llegar hasta un 25% del cañon, pero con eso es suficiente para incrementar su precisión, yo hacía eso para corregir la salida de disparo, a mi me funcionó y me dio mejor alcance y precisión, no aplica esta tecnica en replicas de gas, spring de marca o AEG, esto solo se aplica a pistolas, carabinas y escopetas de spring pero de los chinos.
Nota:
-no estriarlo por completo, el cañon se puede malograr.
-el estriado es a medias, ya que la bb necesita algo de presión y algo de anima lisa, estriarla por completo debilita la potencia de la pistola
-necesitarás aceite multi usos para lubricar el cañon de vez en cuando eso aumenta la velocidad de salida y de paso evita que se trabe.
- siempre hazle una mejora a las miras de hierro a las pistolas de muelle, mejorara significativamente el apuntado, pintarlas con un corrector blanco siempre funciona.
Revisa de vez en cuando el cilindro de la pistola, si se desgasta, te verás obligado a reforzarlo, asi prevenimos desgaste y mal funcionamiento de la pistola.
@@Osprey_exe Mil gracias por el consejo... Se puede modificar el hop up, aun si es fijo ? Sé que tampoco se le puede exigir mucho a estas pistolitas chinas, pero probar no cuesta nada ! :)
hello congratulations, where is it possible to find the spring in question
Hi! Thanks!
Just write in google "m135 airsoft sniper spring". This is the easiest way to find the best shop.
Is your airsoft A hard plastic or alloy/full metal?
So if the airsoft is a full metal won't this brake the gun in a strong/long spring?like the spring on your sniper without cutting it?
This pistol have metal slide, metal barrel and metal spring stop, other parts are made from abs plastic. My pistol is still working fine, so no, Im not afraid.
Without cutting, spring will not fit into the gun.
Hey, do you know the diameter of the inside of the piston and the lenght of the original spring ?
Hi! No, sorry. But I can measure for you both, but you need to wait until thursday if its ok.
Thanks for the reply, but dont bother taking yours apart just for that, I'll measure it myself when I'll receive mine 👍
@@ghostmarksman235I can't find the original spring, but it was around 76mm long.
Piston inside diameter: 12mm
will this all work on a 0.177 gun
This is an airsoft gun, but you can upgrade pellet guns too with double springs.
Wow 360 fps bro...🎉🎉🎉..
did you cut the length of the m135 spring so it can fit?
Exactly.
I have an spring AR, do you think this m135 spring will help?
Depends on the internal parts quality (+plastic thickness)
Trigger sear upgrade definitely important.
If spring coils are similar, it can work.
@@airsoftvseverything it an aeg spring?
@@johnbottcher_g I used 7mm sniper spring in my spring pistol (in the video)
I don't know what your spring AR uses, but if you can measure the outside and inside diameter of your AR spring, maybe I can help which spring would be good for you.
Is there a reason why a very stiff spring alone is not feasible to launch a BB? Is it necessary to convert the spring energy to compressed air energy? Is there some law in physics that limits the speed at which a compressed spring can decompress? I'm imagining a device that is much stronger than a plastic gun housing, but I can't imagine why no one has done this. Do you know the answer?
- How would you put a strong spring into the barrel which is 6mm in diameter?
- How would you hold the BB in straight line when you fire the gun?
- How would you spin the bb in front of the spring for 50-70meter range? (hopup effect)
So yeah, its quite neccessary to convert the spring energy. Its not working only with the spring, that's why noone did this, and noone will do this.
(I like your question tho, its great!)
@@airsoftvseverything Thank you for your reply and insight. I have a crude idea that involves holding the bb in the breach of a free sliding barrel with weak magnets. The barrel and the bb will both launch forward as the attached spring decompresses. As the entire assembly stops suddenly, the bb’s inertia will overcome the magnetic resistance and carry it through the barrel. This is one idea that doesn’t account for the hopup effect. I expect it will launch but not very well. I’m going to post a drawing to my channel as I know that my description is inadequate. I was planning on experimenting with this before I asked you. I have confidence that you are right, but I’m curious to try it nonetheless. Thanks again for your reply.
@@MrLBDude I would like to see your drawing and how you imagine this whole thing. Please, write me if you did it.
@@airsoftvseverything the drawing is in my TH-cam channel under the heading “community”. I thought I tagged you but I probably don’t understand how.
@@MrLBDude Found it. Interesting drawing and "imagination". But I still believe, it will not work as good as you think and planned. Will you ever bulid this? If yes, I really would like to watch.
(I see you tagged me on your post, but I didnt get notification)
Did you upgrade the piston and piston housing of your 1911 pistol? An also did you change the rubber(air seal on the tip of piston) ?
I just put the steel sheets on them for reinforecement. I only placed an o-ring on the tip of the piston, if you saw the video. No other changes.
and also imma put o-ring on the tip of the piston coz the compression is bad without o-ring.
@@tylerurijahAre you sure piston head seal is bad? Before you put an o-ring on it, please check the nozzle-hopup connection too. Usually, thats an another problematic place in these pistols
@@airsoftvseverything yes the piston seal is bad. Coz when i cover the nozzle tip and push the piston it doesnt compress at all..
@@tylerurijah ok
May i know the wire diameter or gauge of original spring from your pistol? And also the wire gauge size or diameter of new spring from sniper? Thanks
Hi!
Original spring wire diameter: ~1,15mm
New (tuning) spring wire diameter: ~1,4mm
Ciao ho danneggiato il fermo per la molla di questa pistola… sapete dove posso acquistare dei pezzi di ricambio?? Grazie per la risposta
You can't. Sorry for the late reply
hey, i have a spring but polymer m1911 from kwc, is there any chance of making the shots straighter because mine as a fixed hopup and i dont like, is it possible?
@@dagnisn8378 Hi! Try to disassemble the pistol, and check the hopup rubber and try to adjust the rubber a bit. It may just twisted.
The other way... if you have good skills, you can buy a short or cheap copper AEG barrel + hopup rubber, and put it in the pistol. Its possible with a few modification.
Hindi nababa ung hook ng piston boss pano ma repair or baka may missing parts
Dont understand it.. :/
Did you cut the m135 spring?
yes, I did
@@airsoftvseverything thank you for your response. Im planning to ugrade my spring type pistol coz it only have 200 fps.
@@tylerurijah Np!. But please note, you can easily break your pistol with a stronger spring. I upgraded the trigger sears too.
@@airsoftvseverything is the m135 spring have same inner diameter with the stock spring of your 1911?
@@tylerurijah Nope, stock spring inner diameter is 9,3mm.
M135 spring inner diameter is 7,8mm.
You can modify the original spring guide but I rather made a new one from a bolt.
Where can i buy new springs?
@@alejarkor I got it on airsoftpro.cz, but its out of stock now.
Try to search on: "M135 7mm sniper spring" (VSR10 spring)
This is a sniper rifle spring, and you need to cut it 4-7mm shorter than the original spring in your pistol
Can you make a spring pistol semi auto ?
Basically, AEP pistols are semi auto guns (with automatic function)
Nice. Do you think you can get the FPS above 350. If you beefed it up in all the right places? lol
Haha if yes your next question will be "above 400"? 😄 Anyway, I don't think so. 350fps is too much for this little cylinder + piston.
@@airsoftvseverything lol. Well, do you think this thing is strong enough to take out a rat?
@@HyperionBadger Not really. My guess is at least 400fps needed to kill a rat (from really close range)
@@airsoftvseverything Well then whip something up! Show me how to upgrade those sears and put a put a real Glock 19 spring in this thing. Let’s get it up to 500
@@HyperionBadger under 700fps I will not start to upgrade this pistol 😒😄
is it accurate? doesnt it make hop up useless?
so-so
Accuracy test: 15m
th-cam.com/video/d8zDZusIf9A/w-d-xo.htmlsi=kiHuaa1kuADorSMF
(I have more accuracy tests on my channel in case you wanna compare this pistol to others)
Do u have a link for the spring?
Cause the m135 spring I have is about 17cm long
@@philipps.7760 As you see in the thumbnail picture, my m135 spring was 20-25cm long too under the pistol.
You need to cut it.
@@airsoftvseverything thank you
@@philipps.7760 Np!
@airsoftvseverything I realized that my spring is too thick so it doesn't fit in the piston. What can I do about that?
hi, where i can buy that colt ? thanks, have a nice day !
@@wesak777 Hi! You too! I bought it on catus.sk, but as I see its unavailable now.
Easier if you search on the pistol name on the internet and you will find the best shop for you.
Pistol name: "Cybergun Colt 1911 A1 HPA" metal slide, spring pistol.
Hi, brother. Something interesting would be the inclusion of a larger barrel. The volume of air produced inside the cylinder tends to be greater than the volume of air the barrel holds. This percentage of air that exceeds the volume of the barrel is expelled after the BBs exit. Incredibly, this extra air volume that is lost has greater compression power. I have a gun like that and I know there's no way to change the barrel, because the hop-up is fixed, but you can thread the outer barrel of the gun and attach a mock suppressor, it will certainly increase the FPS. Because with a larger barrel, the compressed air will be fully utilized.
Hi! :) I know what you mean but that's a lot of "work" for a small FPS increase. (I think)
Will an M140 spring work? I'm just anxious what if it broke but, I'm still confident that my gun can handle it my pistol is m1911 tactics takedown version it has a metal slide also but the cylinder is plastic and some of the parts of my gun is metal alloy, will M140 sping will work?
50-50%, but I think, it will work. But do it on your own risk..
First, you have to reinforce the piston with steel sheet. I have a video link in my pinned comment. Check it, please! Without it, don't try the M140 upgrade.
(If your trigger sear is plastic, reinforcement is needed too..)
I did upgrade my trigger though and I'm currently waiting for my spring to arrive HEHEHEHEh I'm not really familiar with this brand or the company but it says marui M1911A it's made from tokyo
I'll update you anytime soon thank you for your videos keep it up your solid fan from Philippines 🇵🇭
Thank you! Did the spring arrive?
Plastic or metal bb gun ?
Airsoft pistol, so it's using 6mm plastic bbs
where can i find the oring
any hardware store
Hi, thank you for this tutorial. Do you think some plastic may wear out faster since you are using a stiffer spring? I'm plaining to do the same with my M92 from KWC and my Cybergun MP40, but before I will do the sear upgrade as your another video.
Hi. Yes. The end of the pistol (spring stop) may break down with the stronger spring if its made out of plastic.
Piston and the piston catcher are the weakest place without upgrade, so if you make the upgrade, I don't think, anything can go wrong with a bit stronger spring.
Nice and interesting videos you're making! But shouldn't have the 135 spring given considerably more power? 140 m/s should be around 2 joules, so 135 m/s should be around there as well, shouldn't it?
Thanks!
Its a good question.
Firstly, it isn't a full size m135 spring (in lenght). Furthermore, pistol have small cylinder size. Airsoft sniper replicas have 6-7 times bigger cylinder volume than this pistol.
@@airsoftvseverything Oh. Dang, that's a huge difference
Saan ba mabibili ganyan na airsoft . Wala man yan dito sa pilipinas
I'm from Europe. I don't know shops in your region. But I think, you cant buy these kind of pistols in your country, I say this, because already few of my viewers asked /and complained/ about these pistols are not available in Asia)
@@airsoftvseverything walang ganyan na airsoft dito sa pilipinas gas blowback lng meron dito
How much this spring type
@@JosephPiamonte-dg2wr ~40 €
Can i use 1.4mm thickness sniper spring? Btw what length m135 ?
Yes, you can.
7-8mm shorter than original, if you mean the lenght after the cut.
@@airsoftvseverything thanks for respond 😁
I Have Special Combat Colt BB Gun, But It Shoots Metal BBs And Its Witth The CO2 Tank, But I Guess You Have The Tank To Because With Only Spring ID ont Know If It Would Hit Them Shots Like That, But The Spring Looked Really Hard Wich Is Good.
Overall , Good Video, Can You Do Video On My Gun? Its A Mettal Alloy One, Not Plastttic One, I Had The Plastic One, But I Gave It To My Friend And He Lost It Somehow, Now I Bought The Special Combat 1911 Colt.
@@krisraps You have 4,5mm bb gun which shoots metal bbs. What you can see in the video, it's a 6mm airsoft gun which shoots plastic bbs.
Yours and mine are not in the same category. You can't use it on airsoft fileds, I can.
Diketawain mamba p377 ini mah 😂
Thats a cheap plastic pistol haha.
Na a upgrade din ba ang K35DA?
@@worth_tea3530 I don't have/know about that pistol, sorry.
I have a glock 18, spring version..but its looks like real Glock..
What brand?
@@airsoftvseverything Q1
How to order sir from philippines
@@noelcarillo7794 I don't know, sorry. I'm from Europe.
Put a steel bb in it and I’ll be more impressed.
@@cyberlizardcouk th-cam.com/video/InjfoO2UM-s/w-d-xo.html
I did, but not worth it. Low fps, low Joule..
@@cyberlizardcouk Under 670-680fps(/20g bb), 0,90g steel bbs are not doing great.
😮
@@afitkurniawan7499 ? :)
I want to buy this gun bro plzz provide the link dont just like the comment reply me plzz
@@SudhaBramhankar airsoftestartit.com/en/airsoft-guns/spring-guns/cybergun/cybergun-1911-a1-hpa-metal-slide.html?srsltid=AfmBOooan2-iYlo44ALzC8r0hmveopc-x2PXDyxYh52c1lhk2msu2iHL
@@airsoftvseverything bro India me deliver nhi ho rhhh😭 kya karuu
I wanna know what country is that airsoft made from because it has a different mechanism inside comparing to the once im using made from Thailand or Taiwan or China im not sure... Tell me where is that made from Thank you...
@@joemyt3287 I already answered your question yesterday.
Czech beer🇨🇿
I will sell 2j asg gun 460fps with 5 co2 capsules In very good condition(Heckler Koch HK45 GNB) also quick note pls dont do Videos that show like after 2 months do just instead cant wait to see
haha.. be patient 😄
You weren't even shooting the can with tha gun in the shot you can see the plastic bb come from two different places above the gun on first shot 1.16 below on second shot 1.19 thanks for wasting my time.
Are you serious? What you saw is the bb bouncing back with every shots from the can. (Bouncing upwards, and bouncing downwards)
Bro, this is not a fake channel with fake upgrades 💁
It's in slow motion I didn't shoot the video I even gave the time stamp 1.16 - 120 I'm not blind it's all good the mod does work have a great day
@@Greenbear39 I checked your time stamps, those are "bb ricochets" from the can. Anyway, I have a lot of video proofs, my Colt 1911 (spring pistol) is above 300fps with the tuning spring.
You too!
Its too bad i cant find exact diameters of the spring. Do you know them, or know where to find them?
If you from europe, try this. (you need to cut it)
airsoftpro.cz/en/gun-parts-upgrade/sniper-rifles-parts/springs-for-rifles/7mm-upgrade-pruzina-pro-pusky-m140-460-fps-detail
@@airsoftvseverything Thank you, found the proper spring. Now the spring guide part...😅
@@amisauto4360 Just cut it 5-6mm shorter than the original spring + upgarde the trigger sears and thats all.
Upgrade video in the pinned comment.
Hi bro, do you have facebook ? Can you help me something about airsoft pistol ... Please.
I dont have facebook for this channel. I have Gmail if thats good.
@@airsoftvseverything ok bro, can i have your gmail, little can help me about airsoft gun . thank
@@phihung39 sure
airsoftvseverything94@gmail.com
Where possibile ti buy thise soring for gun 135m/sec?
I bought it on airsoftpro.cz , then I cut them.
(7mm M135 sniper spring)
Does the new spring break the gun after excessive use?
No.