Tip for anyone struggling. Heat tf out the back if it's still hard. Also be very mindful of all the connectors. Make sure they snap in but DO NOT force them . They should snap in with little pressure
I have the same issue in network, and all articals I sow they mentioned this is one of the possible reasons. Mey also the network cable , So, I came here to ask if the charging board is related to the network receiver somehow?
Use a suction up. If you can slightly pop on edge just a little you can use a razor, or pick and get under it. once under, you can use a Qtip with alcohol to work around it slowly. This will also preserve the adhesive for the most part
Your video helped me repair mine thanks!
I'm happy to hear that!
Thanks this video just saved me 2 weeks
Tip for anyone struggling. Heat tf out the back if it's still hard. Also be very mindful of all the connectors. Make sure they snap in but DO NOT force them . They should snap in with little pressure
How to order the piece and how to know it matches my device
Is there any certain number or serial for the piece
What device do you have?
The one used in this video can be purchased here amzn.to/417b6tr
Regarding the cover, do I need to glue anything after you finish everything?
I didn't and haven't had any issues, still working great, but it would be best if you did.
@@LMFTechStudios Bro, today the new USB port arrived, I set everything up correctly, but it's not charging. What could be another reason?
Hard to say. I would triple check that everything is properly connected but it could also mean that the part might also be defective.
@@LMFTechStudios What do you think , maybe a faulty Flex Cable? 🤔
Does this solve the mobile network connectivity issues?
I never had problems with mine; I live in Florida and been in several states and internationally (Brazil), and no complaints about the network
I have the same issue in network, and all articals I sow they mentioned this is one of the possible reasons.
Mey also the network cable ,
So, I came here to ask if the charging board is related to the network receiver somehow?
@@DawoodYawansehcis i change the flex cable and problem was solved
Olá amigo pode me ajudar
Em como conseguiu solucionar o problema de rede? @@khaizuranzulkiffle
Thank you , this helped me out of a bind
@@jeffcraft4479 awesome, glad to hear.
Use a suction up. If you can slightly pop on edge just a little you can use a razor, or pick and get under it. once under, you can use a Qtip with alcohol to work around it slowly. This will also preserve the adhesive for the most part
What size screw bit did you use to remove the screwss?
1.5 Phillips Head Screwdriveramzn.to/44MppU21.5 Phillips Head Screwdriver
I used a buch of the thinnest guitar picks from a variety bag and they worked great. Keeping them bitches in my ifixit case
for sure! the guitar ones are great.
Once you get one corner up you can use a playing card to help break the seal of the glue.
Is Super Charging still working? (And also Fast Charging)
Yes to both 👍
Tip: use a utility knife blade to open the back
No issues with sim card?
No issues at all. Cell phone has been working great 👍
@@LMFTechStudios worked like a charm. Thank you
Is the phone still IP68 waterproof
I don't think so since I didn't put a new seal, but I have it in a case so I'm not too worried about it.
How long did this take you in total?
Can't remember exactly how long, probably about 40 min, but know that I know what to do, 20 min should be enough time to get it done.
*Promo SM* ☹️
?