Convert
ฝัง
- เผยแพร่เมื่อ 2 ม.ค. 2024
- Hello friends, today in this video I have shown you
how to make a 220v AC to 3v-6v-9v-12v-24v-36v
-48v-60v-98v-110v-120v.DC driver circuit,
How to make 220v to 1.5v-3v-6v-9v-12v-15v-24v multi output converter,
Convert #220v ac to 3v,6v,9v,12v,24v,36v,48v,60v,98v,110v,120v DC Led driver,
DC converter without transformer Please note, this circuit is not isolated from mains so don’t touch any open wire in this circuit when the circuit is plugged in.It will be dengerous for you if you have not any knowledge about electronics and electrical engineering।
If you want to increase the brightness of the led use 30W,40W & high led and 47uf ceramic capacitor in place of 15uf. This capacitor must be rated 400v or above.
Thank you very much for watching
Have a great day ❣️
Friends if the video is really helpful please Like Share 🙏 please don't forget to Subscribe the channel.
Thank You...
*************Ultimate Electronics************* - วิทยาศาสตร์และเทคโนโลยี
I'm impressed: The first guy using shrink tubes and safety hints on screen. Its a dangerous circuit and not for beginner. Change the 100ohm 2watts to a cement 5watt 120ohm resistor would be a good improvement.
Oh! Thanks for good information ❤️
That must be fun building that I'm surprised that the resistor didn't get hot when trying the big LED strip many happy returns
Thanks for watching
Vai kohob valo and My important vidio❤❤❤❤❤❤❤❤❤❤
THANK YOU SIR
Thangks
That 100k resister is getting blacker and blacker 🙄
Thank you for sharing this 🙂
Thank you
La resistencia que va. Con el condensador en serie . Al positivo se calienta .cambia por una menos valor y mas vatiaje
Thanks for watching
अच्छा लगा 😅
Thank you
👍👍👍
Thank you
Bhai is se battery bhi charge kar sakte hai kya
Kar sakte ho lekin isme shock lag sakta ha charge karte samoy khula chor Dena hai or isme charge hone me time jada lagta hai bohut jald 220v ac se battery charger vi banaunga thank you bro
هل يمكن أن نتعرض للصعق من المخرج Dc
Sir this circuit is not isolated so it is possible to get electric shock
@@WaY2DiY
هل يمكن استخدامها كجهاز اختبار الليد... testr leds
к концу не длительных экспериментов резистор который на плюсовом красном проводе припаян уже заметно подгорел и начал обугливаться, а что с ним станет при длительном использовании такого драйвера?
Thanks for watching sir you can avoid the Resistor the circuit runs smoothly
buat suplay kipas 12v DC kira2 aman nggak kak
Yes sir you can use it for 12 volt fan but the circuit is not isolated be careful with proper cover the circuit
Nesecito lista de materiale
Enviar por esta via
Thanks for watching
Circuit Diagram Please..! 😊
Please see the full video every thing is clear to make circuit diagran
Part ki value show karna chahiye
Show Kiya video me dekhiye sir thanks for watching
Почему подгорел резистор на 100 Ом?
No sir due to resistivity of the resistance it is heat during flow of current so the resistance generates some heat but it is normal
3 volt .to 250 volt led light testar Ka jorurat jai .
THANKS FOR WATCHING
OK SIR I WILL TRY OR BEST TO MAKE 3V TO 250V LED DRIVER
The 100 ohm resistor seems to have burned out while testing the 3v LED
Don't worry it is working
12v mother
Thanks for watching
First of all it is not 22 ohm its 2.2ohm resistor
Good Thanks for watching plz see the full video
100 ohm burned
Don't worry sir avoid this 100 Ohms without 100 ohms circuit will run smoothly but you can also used 10/22 ohms 1w resistor