I have already made it and it is working.. But if I kept the connection running for more than 30 second both resistors 220 ohm were high temperature although they were 2 watt power. Please explain
Output voltage and courrent is depending on the output capacitor voltage. if you put 10uf 400v, you get 400v at 10mA. if you use 1000uf at 2500V, you get 1A 2500V. If you apply car battery at the output, you get 220Vac on the input; it is so powerful that you can run an hot glue factory with this. This circuit is a revolution of the atom theories🤣
A c से ३ से १२० v Dc to ठीक है एम्पियर कितने से कितने तक बनाता है इससे १२ v की बैटरी चार्ज कि जा सकती है क्या इससे करेंट भी लगता है या नही ये भी बताना चाहिए
Bro I've already made this type of cercuit. Ac input current does not constant. When i check through multimeter it show approximately 230 upto 250v but dc output voltage has show 333v which is unbelievable. How is it possible? I've use componets thats are :- 1. 225j 450v pf capacitor 2. 470k ohm 1/2 watt resistor 3. IN4007 Diode 4. 4.7uf 450v Electrode Capacitor 5. 07d511k mov 6. 86ohm 1watt fuseabel resistor 7. 470k ohm 1/2watt resistor
It seems like the person is saying that they appreciate the helpfulness of the project and are grateful for it. They also mention a link to a video and end by saying "thanks." th-cam.com/video/7y9J0tzHtN8/w-d-xo.htmlsi=FqsEg74DDvMyp4aU
خیلی متشکرم بابت این ویدیواموزنده سپاس از شما تشکر❤❤❤👍🙏
I have already made it and it is working.. But if I kept the connection running for more than 30 second both resistors 220 ohm were high temperature although they were 2 watt power. Please explain
ดีมากเลยครับ😊😊
which makes its auto voltage to change?
Output voltage and courrent is depending on the output capacitor voltage. if you put 10uf 400v, you get 400v at 10mA. if you use 1000uf at 2500V, you get 1A 2500V. If you apply car battery at the output, you get 220Vac on the input; it is so powerful that you can run an hot glue factory with this. This circuit is a revolution of the atom theories🤣
A c से ३ से १२० v Dc to ठीक है
एम्पियर कितने से कितने तक बनाता है इससे १२ v की बैटरी चार्ज कि जा सकती है क्या
इससे करेंट भी लगता है या नही ये भी बताना चाहिए
Will it give high or low current
Creative video, keep it up,thank you :)
❤❤❤❤❤❤❤
Does this circuit work for 110V? Thanks for your reply.
Yes
yes but only once. for a few microseconds.
Is capacitor voltage 400v used for its circuit ?
Yes I have used 400 volt capacitor but you can also use according to output or use 120 volt capacitor is better.
Qur voltaje y q corriente queda en ka salida y si por error se invierte quema los led
105 j ki jagha kya 474J use ker sajte hai??? Please tell me.
Yes
Hello, can a 12v 0.50A cooling fan be operated for a long time with this circuit?
Yes , but use 12v zenor diode output side.
sir mujhe RGB led 15 ja 20 ke aas pas chala ne he lambe samay tak kya iseko use kru please reply
Yes series main use krain or jini lagani hn voltage plus krky otny voltage k ziner diode laga dain
@@ECircuits sir 15 ja fir 16 lagani hai app sabhi likh do component please
sir please reply
You only showed the series of two single 12v led, it’s mean 24v DC. How can I connect to ten pieces of 12v DC led (12v DC 30 watts)
Parallel
el capacitor polyester es de 400 o es de 250 ¿¿¿¿¿
You can use any capacitor 400v or 250v .
can it be used to charge the battery ?
@@Akuanakalim-7v no
10 यु एफ 450 होल्ट कां कॅपॅसीटर ले सकते है क्या सरजी प्लिज रिप्लाय देना
Aa carkit thi LED tub lait ful saragti nthi dim sarage6 kevi rite ful sarage te batavo
What is the velu of reji n cap
Details given in video
How many volts the limit output is?
220v dc
@@ECircuitsSuccesfully be yours. Keep healthy, keep happy, keep more creation❤
Bro u have not sho 120v power light in testing time so how i will faith in this project. So please again show the video perfectly
Okay
❤❤❤👍🙏🙏🙏🙏🙏
Board Mey keysey lagey
I don't believe this is safe nor functional . What voltage does a voltmeter read?
This is not safe. Do not touch any part of the circuit. I do not check the volts on the multimeter.
Bro I've already made this type of cercuit. Ac input current does not constant. When i check through multimeter it show approximately 230 upto 250v but dc output voltage has show 333v which is unbelievable. How is it possible?
I've use componets thats are :-
1. 225j 450v pf capacitor
2. 470k ohm 1/2 watt resistor
3. IN4007 Diode
4. 4.7uf 450v Electrode Capacitor
5. 07d511k mov
6. 86ohm 1watt fuseabel resistor
7. 470k ohm 1/2watt resistor
how many capacitor voltage?
400volts
Forditas magyar nyelvre 2:19 2:26
Back ground music is very bad
Okay dear
Berapa nilai wat untuk220ohm?
2watt
RESISTANCE KA WATT NEHI BATAYA
2w sy 5w
this is so very dangerous, never do in this way
Another fake.
where is 3v output? 6v output? 9v output? 12v output? ...
I have run 4 volt, 9 volt and 12 volt LEDs with it. It is an auto driver so it will automatically step down the voltage depending on the LED voltage
@@ECircuits the resistor value is fxed , how the the cicruit step down the voltage automatically ?
It seems like the person is saying that they appreciate the helpfulness of the project and are grateful for it. They also mention a link to a video and end by saying "thanks." th-cam.com/video/7y9J0tzHtN8/w-d-xo.htmlsi=FqsEg74DDvMyp4aU
sir mujhe RGB led 15 ja 20 ke aas pas chala ne he lambe samay tak kya iseko use kru please reply
sir mujhe RGB led 15 ja 20 ke aas pas chala ne he lambe samay tak kya iseko use kru please reply
sir mujhe RGB led 15 ja 20 ke aas pas chala ne he lambe samay tak kya iseko use kru please reply