Thank you. I have an older Farm Pro but your description was enough to guide me through what I needed. Under the seat my 2003 2425 the plate is three bolts to get through to the filter and the drain plug is on the other side of the case. Good to know I can get parts from you!
Richard Schaffling yes the drains are on the same under the rear end the are two of them one on each side it takes a 15/16 or a 1 inch wrench to remove
What kind of dependability have you experienced with the Jinma tractors? I’ve seen quite a few locally in Wis that are advertised as have new head gasket, starter or rebuilt/new engine or clutch and only listed as having a couple hundred hours
These tractors are very dependable IF the owner properly maintains and takes care of the tractor. if you adhere to our recommended maintenance schedule these tractors usually outlive their owners. The main issues that arise with these machines could have easily been prevented.
Please call us at 866-363-8193. We need to know details of what tractor you have etc. Please don't leave a reply here only call with your information. Thanks!
Nana like your videos I like doing business with you guys you guys are awesome when I call you to order the parts you have them in stock and get them to me right away I really appreciate that
I'm trying to drain my oil but there's two bolts underneath that look like they could be right but according to this, they are back far enough for the hydraulic fluid. Where is my diesel oil going and where's the plug? I've got the manuals saying change it every 100/500/1500 hours with absolutely no diagram where they are. I've pulled off so many wrong bolts, this thing is going to fall apart.
If you are trying to drain your engine oil, you need to be under your engine because the oil pan is directly under the block. Look for a big bolt and that is your oil plug. If you have any additional questions please call us at Keno Tractors Toll Free 866-363-8193.
If you have a 200 series tractor the power steering fluid is drawn out of the hydraulic reservoir. if you have a 300 or 400 series tractor there is a separate tank for the power steering located directly by the radiator. This tank requires H46 hydraulic fluid just like the rest of the hydraulics on the tractor.
Thank you. I have an older Farm Pro but your description was enough to guide me through what I needed. Under the seat my 2003 2425 the plate is three bolts to get through to the filter and the drain plug is on the other side of the case. Good to know I can get parts from you!
Pretty cool that you took the time to do this video!
I have a 354 tractor canr get the hijaclick to lift
I cant find parts for mine
I have a farm pro 2420 are the drains the same and what is your web site thank you
The drains should be identical to the Jinma. Our website is kenotractors.com feel free to contact us at 866-363-8193!
Richard Schaffling yes the drains are on the same under the rear end the are two of them one on each side it takes a 15/16 or a 1 inch wrench to remove
Can someone tell me the location of #1 cylinder on Jinma tractor with YD380D diesel engine. Would be greatly appreciated.
#1 cylinder is closest to the engine fan.
What kind of dependability have you experienced with the Jinma tractors? I’ve seen quite a few locally in Wis that are advertised as have new head gasket, starter or rebuilt/new engine or clutch and only listed as having a couple hundred hours
These tractors are very dependable IF the owner properly maintains and takes care of the tractor. if you adhere to our recommended maintenance schedule these tractors usually outlive their owners. The main issues that arise with these machines could have easily been prevented.
@@KenoTractors can I get parts for my Agra cat tractor 🚜 from u guys?
I am looking a complete hydraulic. Lift leaver
Please call us at 866-363-8193. We need to know details of what tractor you have etc. Please don't leave a reply here only call with your information. Thanks!
@1:55 "and the oil is what? fifty three"?
The necessary hydraulic oil is HW46 and the engine oil is 15w-40
Hello i have the same tractor i have a blown steering box but i cant find a way to remove the steering wheel shaft can i call your # for a solution?
Yes! Give us a call at 866-363-8193 and we will do everything possible to assist you!
is the Jinma the same as a KAMA tractor?
Bună ziua .Pot sa comand piese de la Dv pt jinma 204 yds 380 ? Va mulțumesc!
Da, avem piese pentru Jinma Y380. Simțiți-vă liber să ne trimiteți un e-mail la parts@kenotractors.com și vă putem ajuta.
Nana like your videos I like doing business with you guys you guys are awesome when I call you to order the parts you have them in stock and get them to me right away I really appreciate that
Fantastic! im glad we were able to help you out!
How to change a hydraulic pump
I'm trying to drain my oil but there's two bolts underneath that look like they could be right but according to this, they are back far enough for the hydraulic fluid. Where is my diesel oil going and where's the plug? I've got the manuals saying change it every 100/500/1500 hours with absolutely no diagram where they are. I've pulled off so many wrong bolts, this thing is going to fall apart.
If you are trying to drain your engine oil, you need to be under your engine because the oil pan is directly under the block. Look for a big bolt and that is your oil plug. If you have any additional questions please call us at Keno Tractors Toll Free 866-363-8193.
Got, it , thanks@@KenoTractors
Where's the filter in a 254 nor trac1999 hydraulic
Hey where do you put the power steering fluid??
If you have a 200 series tractor the power steering fluid is drawn out of the hydraulic reservoir. if you have a 300 or 400 series tractor there is a separate tank for the power steering located directly by the radiator. This tank requires H46 hydraulic fluid just like the rest of the hydraulics on the tractor.
Need a quieter place to do this !!!
I wish the guy banging during the video would have some consideration for the woman that trying to speak over the racket.
This is a very busy shop! We cant often put the entire shop on hold for a video, our newer videos we have tried to reduce the outside noise levels!