Both headphone jacks are broken on mine now. I just ordered the part. It's just a small board that plugs in. At least I know what I'm getting myself into. Thanks!
Maaaaaaaaate thank you thank you thank you ! Broke an upfader due to excessive DnB so watched this and thought “yeah I can do that…” actually replaced both upfaders in the end. First time opening up pretty much anything and soldering first time in about 20 years. Went like a dream wouldn’t have even tried it without this vid. Not sure I like soldering, a bit nerve-wracking😂 Just had first mix and everything firing. Thank you 🙏
How much would it cost for for 2 pitch fader replacements and labor? As my left side pitch fader is dodgy and keeps jumping when set to 0.0 And the pitch faders to buy are £27.99 each on ebay for my model (the unit in this video) pioneer XDJ-RR
I'm no professional, but the whole job took me around an hour, it wasn't too difficult with the service manual, but I'm sure you can find a local pioneer repair technician.
Hi, could you please help me and my daughter? She has the same problem with these decks. They need new faders. We've watched your video and know what to do to take them out, but we are stuck with one thing. Could you tell us please how you release and reinsert the ribbon cables. As this is the only thing we don't know how to do. We thought you needed a special tool to do this, but with your video being time-lapsed we couldn't tell how you did it. Could you also tell me the site you got the schematic diagram from please. Would really appreciate your help. Kind regards Shaun
Hey, I just googled xdj rr service manual, it's been a few years sorry I don't know exactly where it was from. No special tools for ribbon cables although I wouldn't recommend anyone take on this work unless they are willing to accept voiding warranty and potentially causing more damage to equipment.
I remember back old days when I changed light turns signal on Renault Megane. I have to disassemble half a car just to change that damn light! I never buy Renault again and never ever!
Afraid not, sorry man. Try Google for the service manual and see if anything is mentioned, sounds like the main board or power board is fried though if nothing turns on at all. Best looking for a repair shop near you to take it apart and diagnose the problems
You can find it in the service manual, sorry I don't know it off the top of my head for every model 😅 quick Google of your model and "service manual ", you should be able to find it 👍👍
Both headphone jacks are broken on mine now. I just ordered the part. It's just a small board that plugs in. At least I know what I'm getting myself into. Thanks!
Nice one! Take your time with the dismantling. Good luck! 🔥
Maaaaaaaaate thank you thank you thank you !
Broke an upfader due to excessive DnB so watched this and thought “yeah I can do that…” actually replaced both upfaders in the end.
First time opening up pretty much anything and soldering first time in about 20 years. Went like a dream wouldn’t have even tried it without this vid.
Not sure I like soldering, a bit nerve-wracking😂
Just had first mix and everything firing. Thank you 🙏
Awesome!!! I'm really happy I helped in some way! 🔥🤘🔥
This was my First time dismantling an XDJ unit. Let me know your experiences below!
How much would it cost for for 2 pitch fader replacements and labor? As my left side pitch fader is dodgy and keeps jumping when set to 0.0
And the pitch faders to buy are £27.99 each on ebay for my model (the unit in this video) pioneer XDJ-RR
I'm no professional, but the whole job took me around an hour, it wasn't too difficult with the service manual, but I'm sure you can find a local pioneer repair technician.
Hi, could you please help me and my daughter? She has the same problem with these decks. They need new faders.
We've watched your video and know what to do to take them out, but we are stuck with one thing.
Could you tell us please how you release and reinsert the ribbon cables. As this is the only thing we don't know how to do. We thought you needed a special tool to do this, but with your video being time-lapsed we couldn't tell how you did it.
Could you also tell me the site you got the schematic diagram from please.
Would really appreciate your help.
Kind regards Shaun
Hey, I just googled xdj rr service manual, it's been a few years sorry I don't know exactly where it was from. No special tools for ribbon cables although I wouldn't recommend anyone take on this work unless they are willing to accept voiding warranty and potentially causing more damage to equipment.
Nice timelapse! I'm thinking of trying this but where can I find the faders? I couldn't find them online.
Yo yo!! I used "NB spares" eBay and official site! Good luck
I have a aux cord that broke off in the aux port I wanna change it out do you know if it’s soldered or if it’s a plug in
I remember back old days when I changed light turns signal on Renault Megane. I have to disassemble half a car just to change that damn light! I never buy Renault again and never ever!
My controller is dead XDJR1. Nothing is working or switching on . Can you assist
Afraid not, sorry man. Try Google for the service manual and see if anything is mentioned, sounds like the main board or power board is fried though if nothing turns on at all. Best looking for a repair shop near you to take it apart and diagnose the problems
If you tell me how to do the testing mode, thanks in advanced.
You can find it in the service manual, sorry I don't know it off the top of my head for every model 😅 quick Google of your model and "service manual ", you should be able to find it 👍👍
Where did you order your upfaders ?
www.nbspares.co.uk/
How much would you charge for such job?