ฝัง
- เผยแพร่เมื่อ 21 ก.ค. 2024
- 2001 Nissan X trail QR25 Timing Chain Replacement
P0340 Camshaft Position Sensor A circuit.
*What Happen Timing Chain Stretch*
Once a timing chain is stretched and has lost its integrity, the chain may skip a gear and lose the necessary coordination leading to an engine misfire. Repeated misfires could indicate a timing chain issue and should be investigated. There is a rattling sound.
Timing Chain Kit:amzn.to/3gCNwzI
Tensioner Pulley:amzn.to/3AO62w0
Engine Valve Cover & Gasket:amzn.to/3XwpHKJ
Alternator:amzn.to/3UcsHJl
Drive Fan Belt:amzn.to/3u6Kib0
Hi
If you are looking for help with your Automotive Repairs, Automobile Installations, Mechanical Repair or Adjustment, please head over to carfix for information on it
Please drop your comments and subscribe if you like my videos. Thanks for all the support.
Disclaimer
We are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not carfix - ยานยนต์และพาหนะ
I have to comment just how professional you were, in doing such a great job, and educating thousands of people who will not be scared to tackle a job like this! Greetings from Australia.
Thanks mate
thanks for this specific and professional video!
Honestly,mmmmm the mechanic is very good,to me A big hand to him.
A very nicely put together Video in all aspects.
Well done
Very explicit and detailed video, good job 👍
Excellent video, thanks
Thanks for video. Job coming up.
A great video! Very informative. Many thanks for doing this. 👍👍👍
Thanks
Great job brother I also like doing my own work in the garage. Once done good for another 250 thou KLM saved $1200 in labour who cares if it takes weekend satisfaction!!!👍
Terima kasih bos sangat membantu
Is thera way to put back ascentric gear for the oilpump cover on Nissan Qr 25 engine or do i need to take off the cover again...looks like i made a big mistake and have to take off the mounting bracket the is a pain in the ass
Nice, thanks dude 🤘🏼🤘🏼
Rtv bond sealant too much. Falling inside engine. Will mix in oil and get stuck in oil lines.
Torque specs? For all the nuts how did u figure that out or was it tighten best u can with hand
Thx for the Details in your Video, tomorrow i will do it to my xtrail after 133.000km run. I'll write you again if my ixi is runnig again. Thank you and have a great time by doing sutch Detail video's...
Is it running again?
@@marvinvickers4806
The engine Is running very good, but now the gaspump under the backseat don't work, next searching for parts and work on the car...
Thx
great video, at what KM should you get the timing chain replaced? Or typically what mileage should it be replaced? I'm buying a 2008-2009 model 2.0 diesel and can't see much online Nissan say 300,000 KM but I'm guessing around the 220-250K KM mark?
Ooh my god,thanks very much
Thank you
So the chain already jumped on gear and even did create a bunch of metal chavings, yet the engine is still running afterwards? I like this.
How can I replace oil pump
Very nice done, thank you 🙂
I just move intake camshaft 1 tooth backward and it's solved the problem.
Upper plastic chain tension maintainer removed at 4.10 and put at 16.40 with the wrong site in
I notice you removed the exhaust in order to get into swamp part oil did you remove the frame where the engine mount sit also??
No need to remove frame just exhaust front part only
Nice video. I have same problem 😀
But I'm not sure if you have powered engine oil but otherwise good job done
Thank you sir...i ask you about timing chain later.
I have a unit Nissan extrail QR20 engine.job overhauling.. right now..but that.timing chain. Is not marking yellow 🟡... Maybe i dicide replacement part...i need your opinion... good evening sir..
Did you have to use any special tools to get this done and how long did it take?
No Any special tool
8 hours
Hello, I have Nissan Xtrail T30 with the following problem. Start the engine when it is cold. Drive some time until the engine reach temperature and become warm. Turn off the engine and try to start it. The engine does not start. After waiting about 2 hours, the engine starts. We checked for faults, the gas injection, all sensors etc and cannot find the reason. Do you think the defect may be in the timing chain? It is not original and the distance passed is 50000 km.
First change crank and cam angle sensor
If not go to timing chain
Cold start timing chain ⛓️ not stretch getting worm it stretched
I had the same problem. It was the Cam Angle Sensor. Remember to replace both the Crank / Cam Angle Sensor together as new.
In our case, it was the FlowMeter
❤
Should use gaskets over goop, just makes more work next time around cleaning all the crap off.
I thought the problem is CKP sensor circuit? Your given concern is different from what you are fixing. The problem you are fixing is mouse and misfire apparently.
Noise I mean.***
he is demonstrating through crank sensor adjusment what would happen if the timing chain is stretched and caused the cranck shaft position to advance one notch and affecting the engine and hence the apparent sensor problem. which means the problem is not the sensor but the timing chain has stretched. he is right. in a way he is solving both the sensor and timing chain 'problem' in one go! genius.
I don't think you set your balancer correctly
I was about to say the same thing..
They definitely did not get the balancer timing correct, only the mark.
if you flip the small chain around, then you will notice it will line up with the timing mark for the balancer, and the mark is very visible.
12:18 the balancer timing is wrong here.
You missed the balancer mark on the balancer, if you flip the chain around then it will be corrected.