Rebuilding/Fixing Instrument Cluster Infiniti QX56 Nissan Armada Titan Speedometer & Test Mode
ฝัง
- เผยแพร่เมื่อ 12 ก.ค. 2020
- This video shows you how to get into test mode so you can test/reset your instrument cluster. It also shows you how I was able to fix some issues with my cluster. It has been over a month and these are still fixed, so this can work, but I cannot guarantee anything.
Step Motor
www.ebay.com/i/381848418648?c...
Here are some of the things I use daily when working on cars:
amzn.to/37jyVEM --- OBD II Scanner
amzn.to/37jySJ6 --- Oil Life Reset Tool
amzn.to/3wovipJ --- Microfiber Towels
amzn.to/3OV8Ahh --- Heavy Duty Jumper Pack
amzn.to/3kIKwQE --- Pocket Sized Jumper Pack
amzn.to/3s9RmDa --- 12v Battery Charger - ยานยนต์และพาหนะ
I've had my cluster tested and they said it was good but it still does not light up or work just the security light have any suggestions
My gauges don't work, somewhat lights up and the whole thing flickers and goes out completely 🤯
is it the same for the QX56 2006 model
Hey bro did make video ressoldier the board or where I can find the video
Thanks
Thanks man! This helped me a ton ( :
١
Up here in
Hi do you think it's possible to change the led from the horrible orange to shiny white LEDs? Also great video 😁👍
You’d have to buy them and solder them in. Or maybe you could remove the orange tint on the lights? Not sure, just ideas.
😢😢🎉 2:54 😂
I tried this on my 07 Nissan Sentra. Didn't fare well... 😭
I have infinity 2005 qx56 the speed meter is not working it’s on 140 always 😔
Send it out to get fixed
Did you ever get it fixed ?
I can hear the HVAC actuator. 😂
A customer brought his qx 56 and the RPM is at redline. Even when car is off. So when driving it goes past the redline and keeps going all the way to the zero 🤔
Yeah I think it needs reset. It thinks the baseline is at the redline instead of zero. You may have to open it up and manually reset it?
@@karrskars I fixed it thanks
So the problem comes back. When you rev it like 3 times in a row it twitches and then gets stuck. I’m thinking to change the stepper motor
I have that same issue did you end up figuring it out?
@@ammar_sall7644 yes I changed the stepper motor
I held mine down for over a minute and it never went into test mode
I noticed your oil pressure guage is pegged all the way si is mine, any idea how to fix that guage.
Thnx