You said it bro that truck would have been a HUGE waste of time and money... that wire diagram shows the pro approach to this project these guys are legit
Having done a few complete wiring jobs on street rods before you could order a harness online or through the mail I have tremendous respect for what Doug and Steve are doing, and for the effort going into building the machine in general. I think it is safe to say this is going to be one of the defining projects in the life of SXSBLOG. When I think back on where you guys were just a couple short years ago, looking at this and where you are now is a testament to your hard work and dedication. It is so much more than just a machine, it is a clear statement that speaks to how far you have come, as a team. You guys have pulled together and worked to build your brand and your audience, and in doing so you created your place in the industry, and filled it. I can see other milestone projects like 2JZ coming along every now and then, but I really believe this one will be the looked back as the first all out effort by the group. I think the future is bright for your guys, I hope some day when you come west and hit some of the other spots aside from Glamis, you can announce in advance where you are going to be so that some of your followers (me, in particular LOL) can perhaps share a ride and a campfire with you guys. Keep it up, guys, at this point I think the future is whatever you want it to be.
Words can not express how much I respect this build. This is super duper clean and I can see the attention to detail. I've built 2 rock bouncers in my day. It didnt have anywhere close to the amount of wiring going on here but the amount I had was hair pulling tedious. Much respect to Doug and company for their attention to detail.
An Audio and lighting set up would send this thing into a level even higher than it already is. The amount of research done to do this is a feat in its self! Great work guys!
All I heard was Anti lag and a trans brake on a SxS. So stoked to see this thing launch on dirt and pavement!! I also wish Steve liked being on camera more.
Those Butterfield boys are impressive. Very diligent and methodical. Awesome work guys! Very interesting to see how someone works through setting all this up
Ya need to get AEM on board as a sponsor and take that thing to SEMA!!! Highly impressive build!!! Big Shout Out to the state of Michigan, Wayne County Detroit here!!!!
So when you do get the 2jz build done please call out that guy that has that Ls3 350 small block rzr from hawk engineering out he thinks his is the most awesome utv out there it’s making 600hp obviously the 2jz is going to make 1000 hp but that would be a epic call out race
It’s ridiculous how much work goes into a build from scratch, but watching it never gets boring. Now I know how to build a 1,000 HP Turbo 2JZ UTV from only a bare frame. I’m going to get right on it immediately... as soon as I save $20,000 dollars at least.
I thought I accomplished something when I wired the ceiling fans in my home! LOL AMAZING work guys! I can't believe how involved that is...and that is just the wires.... not the programming end of it! Nice work!
This thing is looking beastly!! just one tip, Look at an or wiring schematic from a supra with the 2jz in it and find the shielded runs in the harness and replicate that so you don't end up with interference later on and be scratching your head trying to figure out the problem. Computers don't like line noise. and trying to trace it down and be a royal pain in the arse!! looking awsome though. this is gonna be the JP wheelie beast!!
Wow this thing is gonna be bad ass for sure...Great content guys, I really enjoy your channel and how well you explain your builds. Very educational and entertaining
I truly enjoy this channel. You guys are hilarious, and seem to be genuine and honest about everything you post or upload. Cant wait to see the 2JP RIP. Wonder if it's going to be faster than the race unit? Lol Idea for an upcoming video: I'd like to hear each of you guy's backstories. What did/do all of you fine gentlemen do before the channel? Thank yall again!
WOW me and everyone watching just can’t wait. Guys my anxiety is through the roof with this it’s crazy I’m sitting here watching this video for the 3rd time with a huge smile on my face the whole time. Even the talking and showing you what we did video’s are so informative that I am just glued to my iPad. Great job thanks sooooooo much for doing this you guys are awesome. Take care and stay safe fellas.👍👍👍👍
Wow... just wow. Doug you are amazing and Steve. Blow my mind every time with your knowledge. One question though.... how do you think Cleet and James will take it when you beat Ruby???
I love the content and click on every video whether I have time to watch the whole thing or not. You guys do a great job but should consider adding a few 10-15 minute videos in there for us busy folk.
I really enjoy watching you guys to relax and just take in some awesome stuff.. Doug is the most calm collected well explained YT ‘dood’ going.. Great work boys Can NOT wait till this beast is alive!! 🤙🏻
You should plan a roll out party and invite all those who have helped with the build. One of a kind machine deserves a one of a kind party. After it is tested for bugs of course. What excitement that would be.
Love these videos and would totally love to see more technical writing videos to glean some of Doug's knowledge. I find them REALLY fascinating and helpful.
This Video deserves two Heck Yeah Dudes! Everyone’s getting as antsy as all of you guys are. Love the technical info. Can’t wait to see it rip. Who’s gonna get the awesome responsibility to pack those 934’s full of CV grease😄? Keep it up guys, great job.
Everytime I watch one of your videos I go to give u a thumbs up, and I see some thumbs down and I ask my self what the heck is the matter with you people, if you dont like 30 min of doug and the sxs crew well there something wrong with u. Love watching you guys build this ground breaking sxs! This is history in the making
Not to take away from you abilities in anyway; I hope everything electric works. That would be fun job pulling any problem areas apart. I hope you have a wiring diagram, other than on the dry erase board. Best of luck with this.
Love this project. Looking great. Please consider some type of shield or jacket over the turbo. I've personally seen bearing failures cause impeller touchdown and pieces of exploded turbos going through hoods and fenders. Looks like the driver would be in the line of fire if such a failure happened.
You guys need to cover the nut pouch in the seat cause anyone that straps in and stages that thing on a strip is gonna have to have a relief in the seat cause it's gonna take a huge pair.
What is going to suck is when you go to start it and you chase it down a week later to find you just forgot to plug something in. Lol. Wiring is the worst!
![Kart one arena MSA junior - 21/12/2024 [3]](http://i.ytimg.com/vi/ze53sgFeciI/mqdefault.jpg)
Really digging the “sky’s the limit” type of build. Found a project that really shows off your talents! Way better than a slow monster truck!👍👍👍
Couldn't agree with this more. THIS is where you guys should put 1000% of your future efforts.
You said it bro that truck would have been a HUGE waste of time and money... that wire diagram shows the pro approach to this project these guys are legit
Imagine this with a monster truck 😎
SXSBlog.com NO!!!!!
Dang man Doug is just a wealth of humble knowledge... HECK YEA 2JP!!!
Overall.... Smart dude.
SXSBlog.com you’re not wrong
Having done a few complete wiring jobs on street rods before you could order a harness online or through the mail I have tremendous respect for what Doug and Steve are doing, and for the effort going into building the machine in general. I think it is safe to say this is going to be one of the defining projects in the life of SXSBLOG.
When I think back on where you guys were just a couple short years ago, looking at this and where you are now is a testament to your hard work and dedication. It is so much more than just a machine, it is a clear statement that speaks to how far you have come, as a team.
You guys have pulled together and worked to build your brand and your audience, and in doing so you created your place in the industry, and filled it.
I can see other milestone projects like 2JZ coming along every now and then, but I really believe this one will be the looked back as the first all out effort by the group. I think the future is bright for your guys, I hope some day when you come west and hit some of the other spots aside from Glamis, you can announce in advance where you are going to be so that some of your followers (me, in particular LOL) can perhaps share a ride and a campfire with you guys.
Keep it up, guys, at this point I think the future is whatever you want it to be.
Thank you for the kind words
That beast will brake the Internet when it is all done. Congrats 👏
Wouldn't be mad about that.
@@SXSBlog definitely not
SXSBlog.com have y’all tried starting it yet
Will you ever make another video on it
People like Doug are hard to come by. When you find a Doug, you keep Doug around forever.
Words can not express how much I respect this build. This is super duper clean and I can see the attention to detail. I've built 2 rock bouncers in my day. It didnt have anywhere close to the amount of wiring going on here but the amount I had was hair pulling tedious. Much respect to Doug and company for their attention to detail.
“We’re gonna be able to just beat it, and she’s gonna take it, and it’s gonna be a life experience”. 🤘🏽🤘🏽👍🏼 Doug is a beauty
Hahaha when you type it out or sounds pretty bad.
@@SXSBlog it sounds thrilling 😉
Kudos to steve,nice to see him at the new shop helping out.
I think the 2JP is the most exciting build yet. Keep up the good work and be safe and have fun.
This project deserves way more views! Everyone share the heck out of it
An Audio and lighting set up would send this thing into a level even higher than it already is. The amount of research done to do this is a feat in its self! Great work guys!
#RACECAR No radio 😎
Need to do a “where’s Waldo” for the big sous head lol seems like it’s always somewhere different
Haha that's a great idea!
Only the real ones will remember the 1k swapped wildcat 💪🏽
Lololololol best video ever
Link or it didn’t happen.
This build is gunna be all over social media once it’s completed. Gunna be sick
It’s the last 10% of a project that always takes the longest and is the most tedious. I’m glad y’all are just cranking it out this build looks amazing
All I heard was Anti lag and a trans brake on a SxS. So stoked to see this thing launch on dirt and pavement!! I also wish Steve liked being on camera more.
Been here since the beginning and it's crazy how far you guys have come.👍
Wow, You guys are building an absolute show stopper!
Talent, Talent, Talent.
Those Butterfield boys are impressive. Very diligent and methodical. Awesome work guys! Very interesting to see how someone works through setting all this up
Ya need to get AEM on board as a sponsor and take that thing to SEMA!!! Highly impressive build!!! Big Shout Out to the state of Michigan, Wayne County Detroit here!!!!
So when you do get the 2jz build done please call out that guy that has that Ls3 350 small block rzr from hawk engineering out he thinks his is the most awesome utv out there it’s making 600hp obviously the 2jz is going to make 1000 hp but that would be a epic call out race
His is built for the mud not a drag strip
Ls3 and 350 small block are not the same thing what so ever but good try a ls3 is 376 ci not 350
@@joeyschultz3774 i'm pretty sure they're talking about the EVO build; th-cam.com/video/mOx3Ghp3x-s/w-d-xo.html
Scott Talasko ohhh ok, there’s a guy who built a lifted rzr and solid axle swapped it and put a twin turbo LS in it so I didn’t know
Hunter Melton I didn’t wanna comment that, thanks for being that guy and not me😂
The clear cam timing cover is pretty cool at 6:16
Amazing work, Doug.. Seriously impressive craftsmanship. Very thoughtful and well done. Wow. Applause to you my friend.
Doug and James from cleetus McFarland really are the mad scientists behind there respective channels awesome to watch
I don’t know what Doug said but I like it👍
Pretty much how we live our lives 😆😆 lol
It’s ridiculous how much work goes into a build from scratch, but watching it never gets boring. Now I know how to build a 1,000 HP Turbo 2JZ UTV from only a bare frame. I’m going to get right on it immediately... as soon as I save $20,000 dollars at least.
You guys are doing an amazing job on the 2JZ project. Love following along.
I thought I accomplished something when I wired the ceiling fans in my home! LOL AMAZING work guys! I can't believe how involved that is...and that is just the wires.... not the programming end of it! Nice work!
Doug is seriously something else. Amazing dude👌🏻
This thing is looking beastly!! just one tip, Look at an or wiring schematic from a supra with the 2jz in it and find the shielded runs in the harness and replicate that so you don't end up with interference later on and be scratching your head trying to figure out the problem. Computers don't like line noise. and trying to trace it down and be a royal pain in the arse!! looking awsome though. this is gonna be the JP wheelie beast!!
Thank you guys!!! Finally 2 JPZ content!!! Loving it you guys are killing it. Gonna be a ripper.
WOW, the amount of detail is outstanding. The thought process that Doug does is awesome, wealth of knowledge!!
Looking good, also appreciate how you guys keep small loose parts on the shelf directly above the scrap bin, self cleaning shelves
If we ever have an earthquake we'll be gaining some storage lol
Fantastic, always closer to run.
Love the update on the "2JP"
That upper timing belt cover is really dope.
Breath of fresh air in troubled times. Thank you, SXSBlog.com! Excellent.
Wow this thing is gonna be bad ass for sure...Great content guys, I really enjoy your channel and how well you explain your builds. Very educational and entertaining
Thank you, glad you are enjoying it!
I love Dougs attention to detail. It’s amazing what he can do when he’s not put on a crazy timeline👍🏻 Great Job guys!
What happened to Steve’s nitrous X3?? We want to see that build!
Last I heard he was having issues dialing in the factory o2 sensors or map sensor....some damn sensor
Great Great stuff and thank you to you guys for giving us great contact 👍👍👍
Sous is perfectly creeping over Doug's shoulder at the scrap bin. Funny as hell
Steve and Doug's beautiful mind can take this thing into orbit
Keep up the good work fellas. Love the channel. Been watching since the wildcat days.
Thanks for sticking around, bud!
Soooooo close to running! Everything is coming together super cleanly and looks great dudes! Cant wait to see this beast shredd brothers!
Dougie just killin the game!!
Steve and Doug are underrated. Smart dudes with awesome ideas
Doug blows my mind. He is a genius.
nice to see a quality wiring job, looking good!
Super excited to see this machine running!
Outstanding job battle bros👊🏼👊🏼👊🏼
I truly enjoy this channel. You guys are hilarious, and seem to be genuine and honest about everything you post or upload.
Cant wait to see the 2JP RIP.
Wonder if it's going to be faster than the race unit? Lol
Idea for an upcoming video:
I'd like to hear each of you guy's backstories. What did/do all of you fine gentlemen do before the channel?
Thank yall again!
Doug has some patience!!! Very knowledgeable guy this build really shows his skill set!!!
Let’s not forget Doug did a rs1 xp turbo motor swap in the down time waiting for parts for this thing lol
2JZ NO SHIT! YO U GUYS FUCKIN KILLED IT! BEAUTIFUL SETUP!
Love this project! You guys are a group of capable individuals who are really showing your talents through one hell of a build! Props to you gents!
Exactly what I’ve been waiting for, can’t wait till it’s done guys. Love it❤️
WOW me and everyone watching just can’t wait. Guys my anxiety is through the roof with this it’s crazy I’m sitting here watching this video for the 3rd time with a huge smile on my face the whole time. Even the talking and showing you what we did video’s are so informative that I am just glued to my iPad. Great job thanks sooooooo much for doing this you guys are awesome. Take care and stay safe fellas.👍👍👍👍
cant wait for the fire up video!!!
These releases are somehow tied to my use of TH-cam, your correlation is spot on for me.
Glad to hear it!
Very excited to see this thing run!
Wow... just wow. Doug you are amazing and Steve. Blow my mind every time with your knowledge. One question though.... how do you think Cleet and James will take it when you beat Ruby???
Very clean guys. Happy to see the growth. Keep up the killer work!
Can’t wait for it to be done and guys keep up the hard work and great content
I love the content and click on every video whether I have time to watch the whole thing or not. You guys do a great job but should consider adding a few 10-15 minute videos in there for us busy folk.
Great video I like watching this content. If you could do a little bit on programming the ECU and how it talks to the Aem
I really enjoy watching you guys to relax and just take in some awesome stuff..
Doug is the most calm collected well explained YT ‘dood’ going.. Great work boys
Can NOT wait till this beast is alive!! 🤙🏻
Wowza! What a wild build! This thing will rip!
Good job boys the time and effort put into the harness will definitely be worth it when its all finished up 👍
Top notch work fellas!!! 🙌🙌 time to build a replica Rc 🤘😁🤘
I’ve been waiting for this! Doug the mad scientist
Was about to go ride at red top trails in MN...new blog posted. Stopped loading up to watch this before we go!!! Can’t wait to see this machine rip!
You guys should take that thing to the salt flats on your next glamis trip!
Those CV joints might even be "Rick proof"
Rick, "challenge accepted"
With the service work you guy's do now, a power probe master kit 4 would go a long way in that shop!
Looking forward to see how this buggy goes and sounds .godbless
You should plan a roll out party and invite all those who have helped with the build. One of a kind machine deserves a one of a kind party. After it is tested for bugs of course. What excitement that would be.
Love these videos and would totally love to see more technical writing videos to glean some of Doug's knowledge. I find them REALLY fascinating and helpful.
2jp about to be smoking everything
Can’t wait to see this thing rip!!! It’s going to be epic. 🤙🏽🤙🏽🤙🏽
This Video deserves two Heck Yeah Dudes! Everyone’s getting as antsy as all of you guys are. Love the technical info. Can’t wait to see it rip. Who’s gonna get the awesome responsibility to pack those 934’s full of CV grease😄? Keep it up guys, great job.
They live their lives a quarter mile at a time...for those 10 seconds or less they are free 🤣🤣
#tunanocrust
@@SXSBlog you got it!!! LMAO
You guys should go to Cleetus’s burnout rivals if you can make it with 2JP that would be so dope
Looking forward to it guys!
Love the content you guys are doing awesome, Doug you should look into Techflex braided sleeving solutions. It’s cool guy wire loom.
Everytime I watch one of your videos I go to give u a thumbs up, and I see some thumbs down and I ask my self what the heck is the matter with you people, if you dont like 30 min of doug and the sxs crew well there something wrong with u. Love watching you guys build this ground breaking sxs! This is history in the making
This is so awesome can't believe it's almost reality, a 2JZ SXS!
Not to take away from you abilities in anyway; I hope everything electric works. That would be fun job pulling any problem areas apart. I hope you have a wiring diagram, other than on the dry erase board. Best of luck with this.
Good morning everybody! YEE YEE BLOG NATION!
Progress makes perfect keep up the work guys she’s gonna be a ripper 🔥🔥🔥🔥🔥💯💯💯💯💪💪💪💪💪
Love this project. Looking great. Please consider some type of shield or jacket over the turbo. I've personally seen bearing failures cause impeller touchdown and pieces of exploded turbos going through hoods and fenders. Looks like the driver would be in the line of fire if such a failure happened.
going to be cleannn
Awesome project guys! Great attention to detail!
Picked up a couple stickers for my tribute cabinet. Only the best make it to the cabinet...Congrats dudes LOL!!!
i have been watching you guys since the day doug bought his YXZ. have watched every video keep it up!!!!
Wiring has always a nightmare. But it is still cool seeing all this put together. It will be nice in that thing "burning right."
You have master skills to be able too build a machine like that.
Great work guy's.
God bless.
I think he meant a life "or death" experience to drive! That thing is awesome and scary and amazing!
I hear SXSblog is talking about a giveaway of the beer fridge that includes a Sous bending over picture for it 😂
You guys need to cover the nut pouch in the seat cause anyone that straps in and stages that thing on a strip is gonna have to have a relief in the seat cause it's gonna take a huge pair.
Haha great suggestion.
What is going to suck is when you go to start it and you chase it down a week later to find you just forgot to plug something in. Lol. Wiring is the worst!