How to use self-leveling on large floor areas

แชร์
ฝัง

ความคิดเห็น • 304

  • @AdrianWareBPP-Poet
    @AdrianWareBPP-Poet 6 ปีที่แล้ว +8

    I remember when I use to work with self leveler. I can definitely say I mastered it and was getting paid wonderfully. it's easy to mix and install, I love it

    • @chapothakid5080
      @chapothakid5080 3 ปีที่แล้ว +1

      I've done this a few times but Idk how to price it correctly.. would u be so kind as to give me some pointers on that please?

    • @AdrianWareBPP-Poet
      @AdrianWareBPP-Poet 3 ปีที่แล้ว +1

      @@chapothakid5080 The best way to charge for self leveler is to charge by the foot. But you have to keep in mind that it is way more expensive than regular concrete so you might want to charge some where around $11per sq ft.

    • @chapothakid5080
      @chapothakid5080 3 ปีที่แล้ว +1

      Thanks for responding... I usually charge for the labor and have them buy the material..

    • @HyperInflation2020
      @HyperInflation2020 3 ปีที่แล้ว

      @@chapothakid5080 It's easy. Charge a lot.

    • @williampurvis3927
      @williampurvis3927 2 ปีที่แล้ว

      With that information if I accept about 20 similar job descriptions, I just might make up for bid mistake,s of the past.it appears effortless.very deciving. Thanks a million.it has now become a direct challenge! Takein no prisoners!

  • @Robguru
    @Robguru 7 ปีที่แล้ว +10

    It's also a good practice to use cleats or spiked shoes and use 1/4 in foam strips along the walls to allow for expansion/contraction especially in areas where more leveler is being used.

    • @MarcelHVAC
      @MarcelHVAC 5 ปีที่แล้ว +1

      Go metric sonny boy

    • @levthelion
      @levthelion 4 ปีที่แล้ว +1

      You're saying concrete expands and contracts like wood?

    • @arcraider937
      @arcraider937 2 ปีที่แล้ว

      They make special rollers for this application , it even helps remove air bubbles.

  • @markmcc78
    @markmcc78 9 ปีที่แล้ว +7

    Awesome videos! I love the little dumping bucket for the mud.

    • @PolmasterTile
      @PolmasterTile  9 ปีที่แล้ว +1

      +Mark McCormick Thanks Mark.

    • @AROM0410
      @AROM0410 7 ปีที่แล้ว +1

      Polmaster Construction & Tile Ltd.

    • @garnetyang2258
      @garnetyang2258 7 ปีที่แล้ว +2

      where do you buy the dumping bucket?? man, I googled it, cannot find it anywhere, :) thanks

    • @PolmasterTile
      @PolmasterTile  7 ปีที่แล้ว +5

      Garnet Yang go to www.ardexamericas.com/en-us/Products/Pumps/Pages/ROVER-Rolling-Barrel-Cart.aspx

    • @garnetyang2258
      @garnetyang2258 7 ปีที่แล้ว +1

      thanks mate!

  • @AngliaDecor
    @AngliaDecor 5 ปีที่แล้ว +2

    Great job Polmaster! Why are there so many negative comments, TH-cam is full of hate.

    • @marcopoulin1897
      @marcopoulin1897 5 ปีที่แล้ว

      Anglia Decor Ltd - Painting Contractor right when you dont know what you doing as him🤘

  • @JayZoop
    @JayZoop 3 ปีที่แล้ว +11

    Thanks for the basic demo. I've seen professionals take it farther with laser level, depth tri-pods, and spiked rollers to break surface tension and make it all smooth as glass.

    • @misiokinsale
      @misiokinsale 3 ปีที่แล้ว

      Spike roller is not for breaking any tension.

    • @JayZoop
      @JayZoop 3 ปีที่แล้ว +3

      @@misiokinsale It lets air bubbles out, and it flattens the leveling compound out, especially where the two pours meet that are of different consistencies.

  • @alexmurdoch4952
    @alexmurdoch4952 6 ปีที่แล้ว +46

    Glad I got to watch you fill water for a full minute lol

  • @doowm270
    @doowm270 6 ปีที่แล้ว +59

    Should have shown dry finished floor at the end.

    • @ahmedvincent8026
      @ahmedvincent8026 3 ปีที่แล้ว

      @Eric Hugh yea, have been watching on InstaFlixxer for years myself :)

  • @lashooter8100
    @lashooter8100 6 ปีที่แล้ว +2

    I use old baseball cleats for walking in the self leveler..much better than spike and more comfortable too

  • @LeroyJenkins-nn5go
    @LeroyJenkins-nn5go 2 หลายเดือนก่อน

    Looks like you mixed it with extra water from the way it flowed. Is that Mapei Level Plus like they sell at Lowes? I’m getting ready to pour some for the first time

  • @williwonka5106
    @williwonka5106 6 ปีที่แล้ว +1

    I will be using the Mapei to fix the FAIL I did yesterday with the Quickcrete product. I might have to chisel the old stuff off. What a PITA! Any suggestions?

  • @rayfullerton8360
    @rayfullerton8360 4 ปีที่แล้ว

    youtube good place to see the difference in way people do it different this guy was self taught used have the tools a person in this trade would but perfect for the do it yourselfer

  • @faisaltakrouri9857
    @faisaltakrouri9857 3 ปีที่แล้ว

    I like this Bucket .. what
    its brand name please ??

  • @Psychlist1972
    @Psychlist1972 8 ปีที่แล้ว +2

    Surprised you went right up to the drywall. No moisture issues with that?

    • @PolmasterTile
      @PolmasterTile  8 ปีที่แล้ว +7

      Drywall is 1/2"-13mm from the floor and self level cement in 1 hour is dry/hard...is no time to absorb from the floor.Thickness in this floor was 3/8" to 1/2" 10-13mm

  • @josephanthony2199
    @josephanthony2199 5 ปีที่แล้ว +1

    This is the kind of work that I do. I'm thinking about starting to make videos of what I do and how I do it. I mic and pour self leveling after grinding the floors. All I need to do is start videoing what I do. Who would watch it?

  • @PRArya-hj4pb
    @PRArya-hj4pb 8 ปีที่แล้ว +3

    Excellent work with your company and they are all set for the use of the product.

  • @renecaron6409
    @renecaron6409 3 ปีที่แล้ว +6

    Never, ever, revisit an area you have poured more than 10 minutes earlier. It will have begun to set. Mix freshly wet areas with freshly wet areas only.

  • @peterlafayette5304
    @peterlafayette5304 7 ปีที่แล้ว +2

    I need to try that. Thanks.

  • @franciscotorres6760
    @franciscotorres6760 9 ปีที่แล้ว +77

    The video is amazing but I would've prefer for you to talk and explain steps and tips

  • @southparklion
    @southparklion 6 ปีที่แล้ว +3

    I want to level an area that would involve covering the bottom bit of drywall with leveler. If I trim off that drywall, there would be minimal overlap with the bottom sill plate of the wall. Should I go ahead and cut off the drywall or try to cover it with something like redgard so that there is a moisture barrier between the concrete and the dryall? Thx..

    • @MAGAMAN
      @MAGAMAN ปีที่แล้ว +2

      Don't cover the drywall. You want the drywall off of the floor a bit so that if there is ever a spill or minor leak, it doesn't soak up into the drywall.

  • @Dsilvaib
    @Dsilvaib 7 ปีที่แล้ว

    I want to level my basement floors and was wondering what I should do if I don't have dry wall up yet? Also do you have any suggestions on how I should clean and prime the floor if I don't have a drain?

  • @999stryker
    @999stryker 5 ปีที่แล้ว +9

    shouldn't you put a damn around the wall to keep the cement from going under the wall?

  • @CytheriaXylia
    @CytheriaXylia 5 ปีที่แล้ว +2

    Anyone have any advice for concrete floors that have an absurd amount of bumps and almost craters in them? Like its ridiculous and I have no idea what I'm going to do.

    • @Chris-mx4jb
      @Chris-mx4jb 5 ปีที่แล้ว

      call in a professional flooring company to fix it

  • @tonygibbs9821
    @tonygibbs9821 7 ปีที่แล้ว +2

    27 bags to cover 40sqm!!!!!
    How small were the bags?

    • @PolmasterTile
      @PolmasterTile  7 ปีที่แล้ว

      Habib Khushi 1 bag 22.7 kg or 50 lbs

  • @spedc
    @spedc 6 ปีที่แล้ว +9

    Yeah, a little verbalization would help. What tools are you using? What ratio of water to powder are you using? You know, kinda important stuff.

  • @michaelgordy6283
    @michaelgordy6283 6 ปีที่แล้ว +10

    Hi. Great video!!! I'm doing 2 rooms basically 14' x 14'. It's bare concrete and is pretty level. If anything between 1/8" - 1/4" out. I putting vinyl floor planks as my floor. Would I start with the low spots first? Or would it just be better to do a skim coat and it will fill the low spots as I spread it with the spiked roller I have? I also went ahead and got the shoes as well. Any input would be very helpful!!! Thanks again. Enjoyed the video!!!

    • @thomasflynn6307
      @thomasflynn6307 2 ปีที่แล้ว

      Yea I raised a floor up to level instead of going for flat you should be able to skim flat is much more important then level I wish I was told this wasted much time and money looking for a level floor when I just need ed flat

  • @marcfavell
    @marcfavell 6 ปีที่แล้ว +1

    How much money per barrel and what is the thickness limit of the product?

  • @quityourwaaaaaa
    @quityourwaaaaaa 6 ปีที่แล้ว +1

    what is the name of that drum dolly you are using? it looks really handy.

  • @TsquareTalk
    @TsquareTalk 6 ปีที่แล้ว +4

    Great Video im about to have to do my floor next week. This helps

  • @loneranger8293
    @loneranger8293 8 ปีที่แล้ว +2

    Great video.I noticed you never used any screed system for leveling? How level was it from one side to another in regards to any tolerance? I am doing my basement and will use screed same width of each room using level baseboards so in theory I will get a complete profile for level. How do you remove old carpet glue and how do you grind out humps?

    • @PolmasterTile
      @PolmasterTile  8 ปีที่แล้ว +5

      You can use screed system for leveling only when is 2 inches or 5cm thick.Screed does not have any bonding component (latex). You have to use ceramic tile adhesive to combine together the old concrete (with carpet glue) and screed.
      This floor was out of level from 0" to 1/2" or 13mm we use Primer-L and self-leveling component Novaplan-2 from Mapei.

    • @PolmasterTile
      @PolmasterTile  8 ปีที่แล้ว +4

      This video may give you some idea how to do Drypack cement please pay attention how we use adhesive for bonding to the old concreteth-cam.com/video/trMJzSRc33s/w-d-xo.html

    • @markmiller2263
      @markmiller2263 7 ปีที่แล้ว +2

      Lone Ranger look it up, you ARE using TH-cam.

    • @professorkaos2781
      @professorkaos2781 6 ปีที่แล้ว

      Dry pack can be used from 0 to 2 inches maximum? Isn't that the specs for most ? Not 2 inches minimum but 2 inches maximum??? Am I wrong here because I have seen floors levelled with Dry pack from 1 inch to 0 many times. Even the flex tile brand uses 1 " as a guide to determine the sqft per bag. Your thoughts?

    • @shaun1okeechobee
      @shaun1okeechobee 6 ปีที่แล้ว

      Professor Kaos I use thinset with 1/4" v notch to bond my dry pack. I also use type M mortar it can be applied from 1/16 to 6". If you use a brand that makes tile products such as Mapei, Jamo, Laticrete,etc.... then yes max is 2". I never use those products not because they're no good. I save a lot of money buying 80lb bags vs 50lb also $5.85 vs $9-13. I run my screeds with dry pack then next day I fill in with type M but I mix it wet like cement. I use a 3/8" square notch to apply thinset then type M on top. I have found this way to work so well for me. I did a carport and we tiled it. They drive on it. Type M mortar has a 2500lb psi which is over kill for inside a house. Im sure others would disagree. I have been in the flooring industry for 27 years thats how I was taught. Good luck

  • @rb.867
    @rb.867 6 ปีที่แล้ว +1

    Looks great
    I have a floor in the back of my house that is concrete and they didnt even try to level it, I put plywood over it and it creaks and bows and i hate it. I want this done but dont know of anyone around here that does that type of work.

    • @rb.867
      @rb.867 6 ปีที่แล้ว +1

      pensacola

  • @edwardjnarrojr3135
    @edwardjnarrojr3135 2 ปีที่แล้ว

    Missed the adhesive perimeter base strip.

  • @diponmalakar232
    @diponmalakar232 2 ปีที่แล้ว

    I have been doing this for 7 years

  • @dave5833
    @dave5833 3 ปีที่แล้ว

    Might have thought about spiked shoes??

  • @RIEGNingBlo00oD
    @RIEGNingBlo00oD 6 ปีที่แล้ว +1

    Will this stuff leak through my living room floor in to my basement? I will be pouring this on wood

    • @markcarroll4280
      @markcarroll4280 6 ปีที่แล้ว +1

      Yes it will. Use plyboard instead

    • @chrismarsh1109
      @chrismarsh1109 4 ปีที่แล้ว +1

      😂😂😂😂😂😂😂

    • @tilerman
      @tilerman 4 ปีที่แล้ว +1

      I was working on a very expensive plush office building in Central London a couple of years back and the contractors poured about 40 bags of levelling compound onto the main entrance hall floor. What they didn't do and should have done was seal around the edges. The result. Unknowingly the compound poured through a quite narrow gap straight into the electricity cupboard in the basement room below. The building was big and had a lot of fuse boards etc. £32,000 in damages as the offices couldn't function and the whole room needed complete rewiring. A lot of damage.

    • @randybobandy9828
      @randybobandy9828 4 ปีที่แล้ว

      Dear God you shouldn't attempt this if you are asking these questions.

  • @nivilli5229
    @nivilli5229 4 ปีที่แล้ว +6

    Really a very nice video... But the next time with the right nail shoes to get even better results

    • @acidforsavages8563
      @acidforsavages8563 4 ปีที่แล้ว +1

      What do you mean? Do you have different solutions?

    • @nivilli5229
      @nivilli5229 4 ปีที่แล้ว

      @@acidforsavages8563 I think so, but Checkt it out...
      www.nivilli.com

    • @randybobandy9828
      @randybobandy9828 4 ปีที่แล้ว

      Nail shoes would k dnt have changed a thing. He might have saved a few oz of product from getting stuck on his boots, that's it.

  • @er.habibkhan7297
    @er.habibkhan7297 2 ปีที่แล้ว

    How much courage of 25Kg 1 bag ?

  • @Technologyadvisor1
    @Technologyadvisor1 6 ปีที่แล้ว

    Hello I have laid leveling compound on a garage floor but I have not used enough and the compound I have put down needs to be raised a few mm as I have not used enough. Can I top it up? it has only been put down 24 hours but I need the level to be level with some concrete that goes round the sides of the garage. please help

  • @victoruche3370
    @victoruche3370 4 ปีที่แล้ว +1

    Can epoxy be applied after the self leveling?

    • @jhalleck
      @jhalleck 2 ปีที่แล้ว

      Yes. Confirm with the product you plan on using that the self-leveler is approved for epoxy top coatings.
      Many are but some are not.

  • @Danny-ju2ip
    @Danny-ju2ip 3 ปีที่แล้ว

    What is the name of the cement and can you put this down on a basement floor ?

  • @jorgealmada4473
    @jorgealmada4473 6 ปีที่แล้ว

    I have a 5,000 square foot 2nd floor to do with 1 inch of material, do you have a video with a pump & a larger mixing

  • @linandy1
    @linandy1 3 ปีที่แล้ว +1

    this looks like alot of work.... i want the easy button !

  • @tinavarnadoe1410
    @tinavarnadoe1410 6 ปีที่แล้ว

    I'm trying to learn how to rip up carpet. then see if the floor is even an learn how to fill in the uneven.to put down large tile big square ones.help me I need step by step

  • @brendanjamison1
    @brendanjamison1 7 ปีที่แล้ว

    Considering leveling out old house concrete basement floor that slopes to a drain. I'd like to raise the drain up and make the entire floor level, so if there's a problem I would just squeegee water to the drain. Slope is roughly 2-3" difference from wall to drain.. Would this method still work with that slope?

    • @PolmasterTile
      @PolmasterTile  7 ปีที่แล้ว

      Brendan Jamison you still can have gradual slope to the drain if you start self levelling away from the drain... but not by the drain.

    • @Chris-mx4jb
      @Chris-mx4jb 5 ปีที่แล้ว

      no for many reasons. you need to fix that with plywood and sleepers

  • @brianwild4640
    @brianwild4640 3 ปีที่แล้ว

    I screed 40m2 to 60m2 on my own with baseboards/skirting boards fitted and I splash less than that

  • @JorgeRamos-ix1jm
    @JorgeRamos-ix1jm 4 ปีที่แล้ว +1

    How expensive was it to do that job. I found self leveling material very expensive but there aren't many choices. Thank you.

    • @danielboard7097
      @danielboard7097 4 ปีที่แล้ว +3

      Jorge Ramos self levelling latex is expensive but more forgiving then normal latex screed Ardex being one of the best also don’t do it like this all wrong..
      floor must be primed use spiked shoes not wellies and use a spiky roller to help the flow and to smooth out any trowel marks

    • @randybobandy9828
      @randybobandy9828 4 ปีที่แล้ว

      That was about $800 in material based on my local hardware store pricing.

    • @randybobandy9828
      @randybobandy9828 4 ปีที่แล้ว +1

      @@danielboard7097 you don't need spiked shoes. They are helpful but as long as you smooth out your shoe marks on your way off the concrete you will be fine.

    • @danielboard7097
      @danielboard7097 4 ปีที่แล้ว +1

      @@randybobandy9828 true but spiked shoes aren’t as messy and it also looks more professional in my opinion

  • @shaun1okeechobee
    @shaun1okeechobee 6 ปีที่แล้ว

    Was this pour for a vct install or some sort of vinyl. I have never seen it done that way if it was getting tile. I like that method for just capping the floor minimally.

  • @gabrielgonzales8163
    @gabrielgonzales8163 5 ปีที่แล้ว +2

    buenos vodeos
    construccion
    work #1

  • @tatkinsful
    @tatkinsful 5 ปีที่แล้ว

    I have concrete floors in our Masonic Lodge that are painted. Poured in the 40's in 8x8 squares. Several have sunk and more than a half inch in many places, will this still work to re level & paint ? What would the cost be ?

    • @AngliaDecor
      @AngliaDecor 5 ปีที่แล้ว

      Try a resin floor to level it Tony, more robust. Kiln dried sand is added to the resin to fill low areas before top coat over all.

  • @brettjones9545
    @brettjones9545 4 ปีที่แล้ว

    Spiked roller????? So dont get air bubbles when dry depending on floor

  • @skyace888
    @skyace888 4 ปีที่แล้ว

    Do you recut the sawed control joints in the concrete slab?

    • @jhalleck
      @jhalleck 2 ปีที่แล้ว +1

      All control joints in the old slab should be honored and recut. Otherwise the leveler will crack.
      You may also want to fill the crack with spray foam so the water in mix and leveler does not fill the old control joints.

    • @skyace888
      @skyace888 2 ปีที่แล้ว

      @@jhalleck Even if using a product like Ditra?

  • @LaAshleighKae
    @LaAshleighKae 7 ปีที่แล้ว

    Holy moly... how long did it take you to clean the existing grout joints?

  • @thomaslindell5448
    @thomaslindell5448 6 ปีที่แล้ว +35

    Does the leveling compound work on that butt crack

    • @mr.wizeguy8995
      @mr.wizeguy8995 6 ปีที่แล้ว +10

      It need to be fiber reinforced or otherwise it will crack again.

    • @zuwenaw
      @zuwenaw 5 ปีที่แล้ว +6

      HAHAHA!! I spit my juice out.

    • @s3rv3r3rror8
      @s3rv3r3rror8 5 ปีที่แล้ว

      some cracks can not be filled.....or at least shouldn't. But you know some "guys" are too curious!

    • @michaelwhite6110
      @michaelwhite6110 5 ปีที่แล้ว +1

      as soon as i saw this guys butt crack i went straight to the comments🤣🤣🤣🤣. i wasnt disapointed!

    • @c.m.2747
      @c.m.2747 4 ปีที่แล้ว

      Mr. Wizeguy 😂😂😂😂

  • @Jdebest50
    @Jdebest50 6 ปีที่แล้ว

    how much does one bag cost?

  • @1stzard
    @1stzard 5 ปีที่แล้ว +2

    So basically you fix bad contractors work?

  • @billybraasch9256
    @billybraasch9256 9 ปีที่แล้ว +4

    what product are you using?

    • @PolmasterTile
      @PolmasterTile  9 ปีที่แล้ว +4

      Novaplan2 and Primer L from Mapei

  • @chrissheehan2755
    @chrissheehan2755 5 ปีที่แล้ว +8

    27 bags for 40m2 try putting less water in mix that's nuts !!

    • @kevinbonilla6488
      @kevinbonilla6488 5 ปีที่แล้ว +1

      Suppost to be 5 quart water 1 50 lbs bag

  • @Matt93se
    @Matt93se 7 ปีที่แล้ว

    Would this be suitable for use in a garage/workshop where I would be using floorjacks & jackstands? My garage floor is uneven and I'd like to level it out. Thanks!

    • @PolmasterTile
      @PolmasterTile  7 ปีที่แล้ว

      Matt93se Yes ...but remember Self Leveling Cement runs like water make sure there is no huge slope everything will run in one direction to the lowest spot until it's filled up

    • @Matt93se
      @Matt93se 7 ปีที่แล้ว

      Got that part covered, thanks. I just wanted to make sure the cured strength was up to the task of dealing with floor jacks and heavy metal!

    • @PolmasterTile
      @PolmasterTile  7 ปีที่แล้ว

      Matt93se go to th-cam.com/users/shared?ci=O9PxzzXcr0M for more information

  • @javierisco8589
    @javierisco8589 5 ปีที่แล้ว

    El autonivelante no se jala solo se golpea para que solo se vaya acomodando.

  • @rphightechflooring.
    @rphightechflooring. 4 ปีที่แล้ว

    Excellent work.
    I am working epoxy flooring and concrete polishing work in India.

  • @davidkilpatrick3689
    @davidkilpatrick3689 6 ปีที่แล้ว +1

    Any cracks should be covered with crack isolation membrane first

  • @MJ-ll4bd
    @MJ-ll4bd 8 ปีที่แล้ว +2

    is your product available in UAE

    • @PolmasterTile
      @PolmasterTile  8 ปีที่แล้ว +2

      Levelling cement is made by Mapei

    • @abduu911
      @abduu911 6 ปีที่แล้ว +1

      Conmix ltd. in uae

  • @stevierug8733
    @stevierug8733 4 ปีที่แล้ว +8

    I’ve been doing this for over 30 years and never had to step all over it yet. Unless I left my phone on the worktop 🤪

  • @gregorravnikar1972
    @gregorravnikar1972 6 ปีที่แล้ว

    You should use spikes,and you add waaay tooo much water...see the bright areas

  • @danielb4640
    @danielb4640 7 ปีที่แล้ว

    grate video, how much would you charge for that job? cheers

  • @jpr2644
    @jpr2644 7 ปีที่แล้ว

    What is ment by flow time

  • @CoupeAudi1990
    @CoupeAudi1990 ปีที่แล้ว

    First time seeing while leveling so tiny floor dude using special shoes for it :D You can level without standing in that wet cement.

  • @jameschesterton
    @jameschesterton 3 ปีที่แล้ว

    That's a lot of kit, screed and time for 40m2

  • @aaxxcdd
    @aaxxcdd 7 ปีที่แล้ว +47

    The music was unbearable. Had to turn it off and couldn't focus on the video

  • @thomaseddy2674
    @thomaseddy2674 8 ปีที่แล้ว +2

    wondering if i could do 240 sq ft with 5 gal buckets?

    • @PolmasterTile
      @PolmasterTile  8 ปีที่แล้ว +1

      You not saying how thick you needs to do. If you want to brush similar to paint/primer ,yes you could do it.Did you notice on the video this is very liquid run by itself like a water everywhere where is lower spot

  • @AndrewsMotorWorks
    @AndrewsMotorWorks 6 ปีที่แล้ว

    Is that Kye Kelly?

  • @AJSnow-StayFrosty
    @AJSnow-StayFrosty 6 ปีที่แล้ว

    I could use some help the tool that he is using to spread it whats that called

  • @barbwleklinski6490
    @barbwleklinski6490 8 ปีที่แล้ว +3

    TEC. Skill set leveling concrete

  • @ronhughley6510
    @ronhughley6510 6 ปีที่แล้ว

    Last self level compound I seen was more like runny batter. That looked like water almost

  • @Zharsergey
    @Zharsergey 4 ปีที่แล้ว +1

    What's the approx cost per sq ft on a job like this?

  • @paulmryglod4802
    @paulmryglod4802 7 ปีที่แล้ว

    how would the job turn out without the self leveling?

  • @wilwiljames1
    @wilwiljames1 5 ปีที่แล้ว

    The vid stated 27 bags but didn't tell the weight of the bags, can you give that info?

    • @Chris-mx4jb
      @Chris-mx4jb 5 ปีที่แล้ว +1

      50 pound

    • @randybobandy9828
      @randybobandy9828 4 ปีที่แล้ว

      Do you not know videos have a description section and that question you asked was answered in that section?

    • @wilwiljames1
      @wilwiljames1 4 ปีที่แล้ว

      @@randybobandy9828 that question was asked a year ago, answered a year ago and you still failed to answer the question

  • @gregcoomer1775
    @gregcoomer1775 8 ปีที่แล้ว

    Sorry for my ignorance but are the bags 20kg? I need to do 16m2 at a thickness of at worse around 16mm (is this doable) and I'm trying to work out how many bags I need.

    • @PolmasterTile
      @PolmasterTile  8 ปีที่แล้ว +3

      I wouldn't buy more than 8 bags.... do not forget the primer.You always can go on top of it.

  • @amikhailovsky4772
    @amikhailovsky4772 8 ปีที่แล้ว

    Great video! What compound did you use? How long is the flow and workable time?

    • @PolmasterTile
      @PolmasterTile  8 ปีที่แล้ว +1

      We use Mapei ; first Primer L after 25 min.Novaplan 2. Flow time for 5-10 min.Workable time is 30 min. You can walk on it in 2-3 hours .

    • @Reliable1102Intel
      @Reliable1102Intel 5 ปีที่แล้ว

      I have a concrete floor that could use this product in a residential garage. What kind of sustained work loads can this product endure? Will it crack under stress from floor jacks and jack stands etc?

  • @yobrogoodwht3566
    @yobrogoodwht3566 7 ปีที่แล้ว

    Listen, my friend, I've done the same thing but have faced a problem that the survival of dust does not go away. I am confused how to install the plastic tiles adhesive. Please advise me.

    • @PolmasterTile
      @PolmasterTile  7 ปีที่แล้ว +1

      yo bro good wht is Reapply the same primer which you use... before self-leveling is pouring on that floor.

    • @yobrogoodwht3566
      @yobrogoodwht3566 7 ปีที่แล้ว

      you are so nice , thanks for your reply.

    • @dustyflair
      @dustyflair 7 ปีที่แล้ว

      Figures two idiots would know what each other was saying.

    • @yobrogoodwht3566
      @yobrogoodwht3566 7 ปีที่แล้ว +1

      Figure the idiot that got his nose stuck in something he has nothing to do with it.

  • @cheryllynn8451
    @cheryllynn8451 5 ปีที่แล้ว

    Would this work to repair a basement floor where someone just dumped concrete on over dirt, and left it full of crevices, holes, globs?

  • @mohammedmalallah2517
    @mohammedmalallah2517 6 ปีที่แล้ว

    wheel Mobile Drum Carrier were I found it

  • @gaewing
    @gaewing 8 ปีที่แล้ว +3

    Curious where to by the bucket with wheels? part number?

  • @davejones4740
    @davejones4740 6 ปีที่แล้ว

    I would always use wheels to do last drop of levelling compound, saves damage to back .

  • @twisterwiper
    @twisterwiper 3 ปีที่แล้ว

    I tried it myself last night. Unfortunately I didn’t get the result I expected. I poured it and spread it out using a toothed trowel. I ended up with the same unevenness as before, just with a thicker floor now 😞
    I applied about 2-3 mm. What went wrong?

    • @almusti
      @almusti 3 ปีที่แล้ว

      Had you sealed the floor? The existing floor may have sucked the moisture out causing the the compound you poured to go off too quick. Otherwise, your mix may not have been runny enough - not enough water.

    • @twisterwiper
      @twisterwiper 3 ปีที่แล้ว

      @@almusti Yes I did seal it before. It probably was not runny enough although I did mix it to specifications.

  • @acejohnstonmafiawars
    @acejohnstonmafiawars 3 ปีที่แล้ว +2

    The consistency of the self-leveling underlay being used looks VERY watery. Batter is usually thicker. Looks like he needs a longer set up time to work the product but result may be compromised if more water was added to the mix than called for. Using a squeegee like that would normally reveal high points as it's pulled across the surface, but the soup prevents that from happening. Well, floor is getting significantly raised up. 27 bags worth... that's a lot of product. Also, primer usually is applied with a soft push broom on concrete, not a roller. Not saying the work isn't good, just that there are some items in the video that can use further explanation.

    • @jhalleck
      @jhalleck 2 ปีที่แล้ว

      Most primers can be applied with roller if the surface is smooth.
      Rough concrete might require a broom to work the primer into the floor. Rough floors can require two coats to get a proper penetration to keep water being from being pulled from the leveler.

  • @kylekilgo6295
    @kylekilgo6295 3 ปีที่แล้ว

    Where does one get the barrel and dolly like you used?

  • @pscjavvy08
    @pscjavvy08 8 ปีที่แล้ว +2

    I forgot to primer before adding self leveling. Can I still primer after?
    I want to do an acetone base grey stain.
    New concrete already poured.
    Thanks for your comment...great job btw!

    • @PolmasterTile
      @PolmasterTile  8 ปีที่แล้ว +1

      Now... you can ad the primer only if you want to do one more layer of self levelling.Otherwise is not necessary

    • @Sendmeyourplans
      @Sendmeyourplans 7 ปีที่แล้ว

      pscjavvy08 you might as well demo what you already poured because your floor will pop it had nothing to bond to.

    • @hardset-vi3ze
      @hardset-vi3ze 6 ปีที่แล้ว

      Primer the existing clean concrete substraight FIRST....TRY READING THE DIRECTIONS OF THE LEVELING COMPOUND!!!!

  • @bingobongo9203
    @bingobongo9203 8 ปีที่แล้ว +7

    if you watch the first min you have seen the whole vid

  • @sunnyliu6254
    @sunnyliu6254 6 ปีที่แล้ว +1

    Welcome to my home visit concrete laser screed videos .
    Laser screed has Laser guidance,Auger dispersing concrete,and then Vibrating and Consolidating concrete the mass.
    Flatter floors , Less manual effort , Greater accuracy, Faster placement

  • @HockeyCraig
    @HockeyCraig 4 ปีที่แล้ว +2

    tell the camera guy to put down the camera and help you out.

  • @MTLUK
    @MTLUK 4 ปีที่แล้ว

    Where's the latex roller

  • @garykumar3915
    @garykumar3915 7 ปีที่แล้ว +28

    He made a mess. no spike shoes

  • @FarukAli-fu1ug
    @FarukAli-fu1ug 5 ปีที่แล้ว

    Why do u need to level self leveling compound!!!???!??

  • @manonamountain
    @manonamountain 5 ปีที่แล้ว +1

    'Self levelling compound' is a bit of a misnomer.The only true way it works, is by finding the highest point in an
    area to be levelled, then wet pouring immediately after it has been mixed/agitated, until it reaches the aforementioned
    highest point. All that trowelling is a complete waste of time. You never see anyone putting a straight edge or
    spirit level on the floor in these videos, as they won't be perfectly flat or level.

    • @randybobandy9828
      @randybobandy9828 4 ปีที่แล้ว

      These products work just fine. Ofcourse you start at the highest point in the room. The products name isn't a misnomer, it does exactly what it says it does.

    • @manonamountain
      @manonamountain 4 ปีที่แล้ว

      @@randybobandy9828 Well i disagree, because i've seen loads of it down and it's just as bad as it was beforehand. It most certainly does not level things out by itself.

    • @randybobandy9828
      @randybobandy9828 4 ปีที่แล้ว

      @@manonamountain no you obviously have to move the product around where it needs to go but the product doesn't say it automatically levels a floor. It is called a self leveling concrete meaning it levels itself out where every you pour it.

  • @monalizak-t7r
    @monalizak-t7r 7 ปีที่แล้ว +1

    I used this self leveling in a small room and it works great..but you can't go over it more then three times as it sets fast its like a resen ...the only down part is the price at $30 a bag whoo...that's 27 bags for that floor your talking $800 ish..but I only needed two bags luckily..
    Just make sure you ratio in exact.
    Good luck.

    • @phillipcrum3933
      @phillipcrum3933 6 ปีที่แล้ว

      Thanks for the detailed feedback.

  • @wadeanderson4372
    @wadeanderson4372 2 ปีที่แล้ว +1

    why is there soo many videos on TH-cam of self doing leveling?? Why make it too stressful? Just get two others and it will be pleasant work. One cooks, one is a runner and other is an applicator. I been there and done that and leveling is not worth doing alone.. just my take ;D

  • @UnexpectedlyRandomOfficial
    @UnexpectedlyRandomOfficial 2 ปีที่แล้ว

    Forbidden Frosty..... XD

  • @christianagravante9745
    @christianagravante9745 4 ปีที่แล้ว

    It's as if you're the only one who understands how to mix it. And it would be good if you explain carefully for tips.

  • @edwardcharles9764
    @edwardcharles9764 6 ปีที่แล้ว +16

    Thumbs down. Tells me nothing I might as well just have a radio on for the music!

    • @randybobandy9828
      @randybobandy9828 4 ปีที่แล้ว

      Are you illiterate? Why are there always autistic people like you on every video with music complaining about the music?

  • @bolzicco
    @bolzicco 6 ปีที่แล้ว

    Looks like Improve Canada