How To Level A Floor | Self-Leveler Tips For DIY Beginners

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 มิ.ย. 2024
  • Self Leveler Used - homedepot.sjv.io/Y9vR9e
    Small Pink Foam Roll - homedepot.sjv.io/eK5111
    Large Mixer (For Drill) - amzlink.to/az0CPHtsIWfF1
    Great Stuff Foam - amzlink.to/az0EbYBIAAj2Z
    Emily (‪@YouCanDIYHome‬ ) will walk you through the process of leveling a bathroom floor ensuring you have a solid base for your tile or vinyl plank floor. Along the way, she will give you a few tips to ensure you have a successful project which is approachable my most DIYers. Leveling your floor will help ensure the rest of your project is much easier and will help you get the end results you want on your DIY projects.
    Free Home Maintenance Checklist:
    everydayhomerepairs.com/home-...
    DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 68

  • @EverydayHomeRepairs
    @EverydayHomeRepairs  6 หลายเดือนก่อน +4

    Check out the rest of Emily’s videos here: www.youtube.com/@YouCanDIYHome

    • @itzNickyJayBeats
      @itzNickyJayBeats 6 หลายเดือนก่อน +1

      Great video Emily!

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน

      Thank you so much! @@itzNickyJayBeats

    • @adm6785
      @adm6785 3 หลายเดือนก่อน +1

      The link isn't working for me. Is it still up?

    • @EverydayHomeRepairs
      @EverydayHomeRepairs  3 หลายเดือนก่อน +1

      @@adm6785 Emily's Channel (You Can DIY): www.youtube.com/@YouCanDIYHome

  • @HannahMattox
    @HannahMattox 6 หลายเดือนก่อน +9

    A fellow lady home-diy-er! 😍 Rock that quick set, sister!

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน +1

      😀🙌🏼🙌🏼🙌🏼

  • @kateneal5137
    @kateneal5137 6 หลายเดือนก่อน +3

    I like that you show the consistency of the level or.

  • @blueline308
    @blueline308 6 หลายเดือนก่อน +6

    She needs to be in every one of your videos

  • @TheExcellentLaborer
    @TheExcellentLaborer 6 หลายเดือนก่อน +2

    Excellent tutorial! 👏

  • @name.terrie
    @name.terrie 6 หลายเดือนก่อน +1

    Thanks so much for sharing this information! You're ahhhhhmazing!

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน +1

      Thank you Terrie!

  • @kommoncents5853
    @kommoncents5853 6 หลายเดือนก่อน +6

    Good video well explained. It's much easier to remove that spray foam with an oscillating tool than a knife.

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน

      Good idea! I tend to make things harder than they need to be :)

  • @MrSloanmeister
    @MrSloanmeister 6 หลายเดือนก่อน +1

    👍💯 Very Informative, Thanks For The Step By Step. Great Job!

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน +1

      Happy to make it! Thanks for watching and commenting!

  • @fredmontgomery9436
    @fredmontgomery9436 6 หลายเดือนก่อน +1

    Excellent video! Please be in more videos!

  • @johnbrill1183
    @johnbrill1183 6 หลายเดือนก่อน +1

    Great video!

  • @johnrustic
    @johnrustic 6 หลายเดือนก่อน +3

    Very good video and kudos to not having plumber's crack lol.

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน

      I edited that out. :)

  • @ferdbirdthenerd
    @ferdbirdthenerd หลายเดือนก่อน

    This was awesome

  • @AnthonyIsToeKnee
    @AnthonyIsToeKnee 6 หลายเดือนก่อน +1

    Great information, i just subbed to her channel.

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน +1

      Thank you so much!

  • @sherlok48
    @sherlok48 4 วันที่ผ่านมา

    I wonder what kind of primer should be used. Are these primer same as the painting primer?

  • @dansarfert3585
    @dansarfert3585 6 หลายเดือนก่อน +1

    Scott's channel is doing great to get Jennifer Garner to do a video for him!
    j/k - Just checked out your channel Emily, subbed, and will check out more content soon!

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน

      Thank you for subscribing, I appreciate you!

  • @bbraat
    @bbraat 14 วันที่ผ่านมา

    It took so long to mix the self-leveler that it was setting before I was pouring.
    I tried then to apply it like spackle but it was rock hard in minutes.
    Is there any way to keep it in liquid form during the mixing?

  • @christianlewis7985
    @christianlewis7985 6 หลายเดือนก่อน +6

    FYI - troweling or using a “spiky roller” is actually critical to self levelers. Directly after the mix, surface tension builds up, so breaking the surface tension after a pour allows for greater flow and leveling.
    It’s on the instructions on the bag

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน +1

      Good point- I’ve always used a trowel or squeegee. I usually just do small bathrooms. Now they have spiked rollers for cheap on amazon. Back when I started many years ago, I could afford to buy a spiked roller (they were pricey and I couldn’t justify a tool I didn’t use a lot) I’ve even seen people use a paint roller attachment without the roller on it, just to break everything up. I’d definitely just order a spiked roller if doing a bit space.

  • @BathroomRemodelingTeacher
    @BathroomRemodelingTeacher 6 หลายเดือนก่อน +1

    🔥🔥🔥

  • @dean9498
    @dean9498 5 หลายเดือนก่อน

    We use dura rock instead of osb. If we're pouring over an inch thick.

  • @Wooster77
    @Wooster77 6 หลายเดือนก่อน +1

    Do you need to cover the entire room with the leveler, or only the dip (if the edges can be identified)?

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน +1

      You can absolutely just do a section. Some people put screws in the floor in the dip and then screw the heights of the screw up to how deep they need to pour so they know how deep to go in each area. Or they make markers with foam board or some other product to know how deep to go in a divet.

    • @Wooster77
      @Wooster77 6 หลายเดือนก่อน +2

      @@YouCanDIYHome using screws to mark heights is a great idea. Thanks.

  • @1LonePuma
    @1LonePuma 6 หลายเดือนก่อน +3

    Well done, and thank you; however, the land lord may not approve my doing this job, even I can, he might want to watch your video, it will give him confidence to maybe let me do it...
    Thanks again mam, tips hat. 🤠

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน

      Maybe he will! Some landlords are happy to have tenants do projects, doesn’t hurt to ask!

  • @Xzavieur
    @Xzavieur 6 หลายเดือนก่อน

    if you ever remove that tub wont that destroy the tile job being below the threshold of the tile that much?

    • @YouCanDIYHome
      @YouCanDIYHome 3 หลายเดือนก่อน

      It's a pretty solid tub. I can't imagine a situation where I would remove the tub but not replace the floor tile. You could definitely pour leveler prior to setting the tub if you preferred to do the whole floor. I always feel better keeping the weight of a house down, it just makes me feel better. I know that sounds weird and it doesn't matter.

  • @Turb0Yoda
    @Turb0Yoda 6 หลายเดือนก่อน +2

    Damn Scott, I didn’t think you’d grow that much hair in between your uploads 😂

  • @mjwint
    @mjwint 6 หลายเดือนก่อน +1

    Be sure to cover all holes, I missed a few nail holes and going a pile of self-leveler on work in the basement shop under the first floor area I was leveling.

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน

      Yes! It can be catastrophic if you miss one!

    • @dean9498
      @dean9498 5 หลายเดือนก่อน

      A piece of paper drywall tape can be pushed into the wet leveler to seal up the hole while your pouring. Preventing the leveler from flowing through the hole.

  • @jackjohansson10
    @jackjohansson10 3 หลายเดือนก่อน

    I can help

  • @JCWren
    @JCWren 6 หลายเดือนก่อน +5

    And not a single Wago was used.

    • @sarspants
      @sarspants 6 หลายเดือนก่อน +1

      A Wago two-two-one lever nut?

  • @jesusgjchuza6491
    @jesusgjchuza6491 6 หลายเดือนก่อน +1

    😎🤝

  • @mastergoblin7205
    @mastergoblin7205 6 หลายเดือนก่อน +2

    dear Lord. Have you just nailed a bended board without any glue?
    someone will be up for a surprise in 10 years

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน +1

      Adding glue is definitely a great idea. And always screwed, never nailed. The helix of the screw is going to give a great grab. The shank of the nails would for sure allow for slippage over time. I have similar jobs many years old that are screwed down and still going great 😀But yes, definitely wouldn’t recommended nailing if you’re not glueing.

  • @weekendwarrior3420
    @weekendwarrior3420 6 หลายเดือนก่อน

    Put half of the powder in, mix a bit, put the rest. That's much easier.

  • @TheKingOfInappropriateComments
    @TheKingOfInappropriateComments 6 หลายเดือนก่อน +1

    Scott's wife? Used to an introduction on this channel.

  • @Kil7witch84
    @Kil7witch84 6 หลายเดือนก่อน +1

    Couple of pro's over here!

    • @todd2456
      @todd2456 6 หลายเดือนก่อน +1

      Apostrophes don't make nouns plural. :)

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน

      Thanks for watching and taking the time to comment!

  • @Rusty-Shackleford69
    @Rusty-Shackleford69 5 หลายเดือนก่อน

    How to create a higher non level floor!😂😅😊

  • @peterpowers4851
    @peterpowers4851 6 หลายเดือนก่อน +1

    Is this his wife?

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน +7

      Hi! Nope, I’m a contractor from a small town in Wyoming :)

    • @peterpowers4851
      @peterpowers4851 6 หลายเดือนก่อน +2

      @@YouCanDIYHome oh nice! Just subscribed to your channel :)

  • @demophys4883
    @demophys4883 6 หลายเดือนก่อน +2

    I think it would be wise for you to wear a mask. There was a lot of nasty dust when you poured the bag into the water bucket.

  • @njc41980
    @njc41980 หลายเดือนก่อน

    Yikes. No. If you're using scraps of OSB, caulk, foam, and tape to create a level floor, you're doing it wrong.

  • @alpha42069
    @alpha42069 6 หลายเดือนก่อน +1

    that spray foam looks uggglyyy

    • @YouCanDIYHome
      @YouCanDIYHome 6 หลายเดือนก่อน +1

      There are lots of other options for dams. This is usually the easiest and I was uncoupling and also tiling over so any weird gaps were filled with thinset. They actually make stick down boarders you can buy, but I don’t think it’s worth the extra expense for me