How you can identify the latest variation of 1zzfe with the upgraded pistons that don't burn oil. I want to swap engine and want to buy the new version that don't burn oil
Hi Peter thanks for all your helpful videos. I have a 99 Corolla with the oil consumption problem. Would I be able to fix this problem with replacing just the rings or should I replace the pistons also
I think my car has a problem and needs these changed. I'm going to try some of oil leak stopper first, but if it doesn't work then I'm just going to drive the thing into the junkyard and walk home.
@@geoffreygrant9525 Sold it for $800 along with the engine issue. Got a police report months later that it was never registered and was found abandoned.
my car has a misfire on 4 and i cant tell if its the head gasket or the cheap piston rings they put in the 2009. runs rough and makes noise... new spark plugs and coil didnt fix it at all.
Peter Finn my tuck is emitting kind of white smoke.. Can i get some help please? -when at idle... The smoke comes out only at high rpm.. And the truck starts as a charm without any smoke -when driving, the smoke comes out after changing gear and accelerating then smoke emission stop when the truck goes smoothly -the smoke also comes when driving as if uphills and then stops on flat roads Any suggestions on what could be the problem please?
And if you put new rings on a old piston your not fixing the problem at all get new piston hone the cylinders measure the bore of the block check the gap of the piston rings and then assemble everything but always check piston to wall clearance ring gap and bore size !
@@TheRafy127 yeah I talked to a machine shop they said the same thing you just did. Some guys just post videos for views and leave out the discouraging extra stuff. I'll be doing my engine after hoan and measuring to go up a size possibly if needed.
Cleanliness is very important when working with engines
Keeping those gritty carbon in piston skirt is a sure way to run into problems later on
Great point!
Thanks Peter , all the best
once again great video. i see your english is getting better ;)
Hi and Thanks. Your comments have improved my English skills. :-)
Very informative video. Thank you very much.
You are welcome!
This is like car repair ASMR
Thanks and noted 👍
Hi Peter, so the oil ring doesn’t matter which side facing up??
Right
Sir we are asking for a torquing bolt chart for example when you are assembling a Toyota Corolla engine 5A FE
Ok
Thank you for the video. Berrymans Chem Dip would make quick work of all that built on grim.
Great point!
Very educative thanks. Pls how can I get highly quality pistol and ring.
From dealer
To be onest need more focus and more light
But good video sir
Noted 👍
Great nice to learn from you thank u.
Thanks for watching!
Hi mr peter can you tell me what clearanc number... of piston ring 2e engine Black ⚫️ machine... Piston rings clearance toyota e11 2E engine
2002 Toyota Camry 2.4 4cyl. Can I replace rings only and is it a fairly easy repair? Thank you and Cheers....
Yes. Only rings is Ok
Can you remove piston ring under chassis by removing oil pan without taking out the whole engine in audi a4 b7 2.0tfsi
HI
I think you need to remove the engine of your Audi. Audi is bytheway great car.
does the new oil ring have bigger holes?
No
How you can identify the latest variation of 1zzfe with the upgraded pistons that don't burn oil. I want to swap engine and want to buy the new version that don't burn oil
Thanks for comment 😀👍
Some said rings cannot be replaced on a corolla d4d diesel engine 1.4 2015 gor compression. How far true is that?
Thanks 👍
Hi Peter thanks for all your helpful videos. I have a 99 Corolla with the oil consumption problem. Would I be able to fix this problem with replacing just the rings or should I replace the pistons also
Hi George and thank you. Rings. Take care and smile. 😀
Rings only
I think my car has a problem and needs these changed. I'm going to try some of oil leak stopper first, but if it doesn't work then I'm just going to drive the thing into the junkyard and walk home.
Did you ever take it to the junkyard?
@@geoffreygrant9525 Sold it for $800 along with the engine issue. Got a police report months later that it was never registered and was found abandoned.
Did u have to hoan out the bore before u put in the piston
No. But hoan is Ok too. :-)
What's the name of this product of the rings?
Nippon piston ring
hi mate, is this 1zz engine or similar ?
Hello my friend iGarage.
It's similar.
Have a nice weekend.👍
ماهو افضل زيت للكورلا 1995 ممكن صوره
Noted 👍
my car has a misfire on 4 and i cant tell if its the head gasket or the cheap piston rings they put in the 2009. runs rough and makes noise... new spark plugs and coil didnt fix it at all.
Thanks for comment 😀👍
1azfe/fse uses the same piston rings? I was told the 1az fse oil ring separator is smaller than the 1az fe. Is this true?
That is correct
Hi buddy, I wonder is this same for 1995 1.3L corolla engine? engine family 2E
Same idea
Peter does this work for a 1994
Yes, also in 1994.
Did u gap the top 2 rings?
Yes
How much will cost to change this piston ring in a shop?
About 1000 US$
Can i know the symptoms of bad piston rings please?
Yes: poor oil quality, long oil replace periods and no oil filter replace, no air filter replace
Peter Finn my tuck is emitting kind of white smoke.. Can i get some help please?
-when at idle... The smoke comes out only at high rpm.. And the truck starts as a charm without any smoke
-when driving, the smoke comes out after changing gear and accelerating then smoke emission stop when the truck goes smoothly
-the smoke also comes when driving as if uphills and then stops on flat roads
Any suggestions on what could be the problem please?
Thanks
Welcome
مرحبا كيف حالك لديه گورلا 1995 تصرف وقود مع ذالك غيرت بخاخات بلكات كلاص بانزين فيت بم
Noted 👍
He dint even check the piston gap or the bore how the f!@ck he knows that the pistons rings have the right mm of gap !!
And if you put new rings on a old piston your not fixing the problem at all get new piston hone the cylinders measure the bore of the block check the gap of the piston rings and then assemble everything but always check piston to wall clearance ring gap and bore size !
@@TheRafy127 yeah I talked to a machine shop they said the same thing you just did. Some guys just post videos for views and leave out the discouraging extra stuff. I'll be doing my engine after hoan and measuring to go up a size possibly if needed.
Thank You 👍
First ring Ibi what
Thanks for info 👍😀
This piston looks like 1zz engine
Great info. 😀👍
You are not clean in work
You are right.
ممكن رابط حساب الفيس بوك بتاعك
Noted 👍