Fix Hoverboard Blinking 9 Times - Its Not What You Think!
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- Learn what it means when a hoverboard motherboard blinks 9 times. We also uncover other motherboard error codes in this video such as when a hoverboard logic board blinks 5 times and 4 times.
W E B S I T E
www.StreetSaw.com
C O U P O N 5% O F F
TH-cam5
S O C I A L N E T W O R K S
Google+: goo.gl/aQ48iT
Facebook: / streetsawhove. .
Twitter: / streetsawusa
Instagram / streetsaw
Pinterest: / streetsaw
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
![ตีสิบเดย์ [FULL] | เปิดใจ "อาจารย์ เบียร์ ฅนตื่นธรรม" นักสนทนาธรรมสายดุดัน!](http://i.ytimg.com/vi/vqaBI_mnoDk/mqdefault.jpg)
If you have a red flashing light on one side and it wont move and Recalibrate doesn't fix it... Check all plugs and wires are getting good connection (Especially the 5 wire sockets). If they are and it still don't move then it probly has a blown output fet on the side thats red. They're easy to change.. MAKE SURE BATTERY IS UNPLUGGED!! Measure the Mosfets, 6 on a heatsink per side(GDS)... Usually only 1 or 2 short... DMM to Diode, Neg on Center pin (Drain), Gate approx +1.5v, Source approx .5v. YST7575C crosses to RU6888R 68v 88a TO220 *** For the 12 Fet Mainboard Model, one bank of Fets controls one drive wheel. Do a continuity test to figure out what bank controls what side.. Each bank of Fets, are broken into pairs per thick drive wheel wire (YGB)..
Correct. I had a ground wire out of the four that go inside of wheel motor. I solder ground back on and hoovwrboard worked without having to balance it
Hello! I have a similar issue, BUT the LED flash 7 times. Do you know what this means?
I got a problem with my hoverboard should the tires are not moving but it is charged and we bought it off someone and we opened it to see the problem and there was one red cord not plugged in does that mean anything can the wheels lock up and if they do how do I fix them?????
Brittney Couch wich one? Is it a big plug with 5 electric tiny sticks inside the plug?
Brittney Couch or is it green?
Can you put bigger tyres to the wheels?
Maybe you can help me... My hoverboard doesn't move on one side and a red flashing light blinks on that side and beeps repeatedly. After charging completely, the side that doesn't move and blinks red worked for about a half a second before going dead on that side and blinking again. also (on the same side) the blue light on the front acts as though it has a short in it, as it will come on and kind of flicker in and out? i took the cover off one side and checked all the connections. Everything was fine. However, on the side I'm having issues with, there's a single screw i can not remove to save my life, and the cover on that side is nearly impossible to pull off to even get a glimpse at what it looks like inside. I've tried looking this issue up online and I've come up with nothing but advice for re-calibrating, which I've tried and it won't even seem to do that. I'm at a loss. Do you have any idea what the issue may be?
Hi Cassandra, What type of hoverboard do you have and would it be possible to get a video of this happening. You can share it with us via chat on our website at streetsaw.com
can you help me how to connect Arduino with hoover board wiring diagram and code for Arduino for speed control
I also have a super rare problem with mine, it was wrecked and i repaired it. So everything was okay until i noticed that my battery indicator was not flashing red before it died, it only shows that the battery is active
Same with mine
hello I'm from Brazil. when this light flashes twice. what does it mean ? I've researched. and it's not right I await a response.
Halo. I have a Hoverboard. Scooter. When I turn on, press the move button to move and stand and not to move unless I turn it back on. Teach me what to do. What is the solution to fix it. I am from the Republic of Iraq and subscribers to your TH-cam channel.

my hoverboard is blinking the red light twice, do you know what does it mean??
+rialsaan2 Which light on the hoverboard is blinking twice?
i need the firmware for hoverboard please my mail is bedowow6@gmail.com
I have a hoverboard Skymaster 11 double wheels, the board turns on and after a while it stops working, I disconnect plug from batery to electronics. I take multimetr, and there is a shortcut on the electronics. I take schorcut plus with the minus in electronics plug, i take multimetr and i do not have schortcut , after connecting electronic devices it works again, what could be wrong?
I need some help. My sons hoverboard just has beeping and blinking green lights when try to turn on. I can't find anything around this happening. Any ideas
What is the name of this hover board
I have a question how do you take off the plastic cover on the future saw is just un screwing it from the body I want to get it painted
+E99Y.O Yes, it is quite simple to remove the plastic panels by using a regular philips head screwdriver.
StreetSaw Hoverboards thank you very much
Plz share your contact numbet plz.
where does those wires hes holding at 1:40 go my brother disconnected it and doesnt know where it goes and now it blinks a red light and wont move ive tried recalibrating it but it seems that its because of that red and black wire
Ramon Diaz its the wire that connects with the on and off button
I just read 9 times meanins you opened the hoverboard upside down
hallo i have the same problem but bilnken 2 timer red in the motherbord plz help
I got new sensors for mine. And installed them and it doesn't move still. And I haven't tried this. Thanks hopefully it works
my hoverboard is blinks many time and also creating noise can you please asst me what to do?
When my hoverboar mainboard little speaker make long beep sound what does it mean ? It long beep always and not turn off. Battery and indicator led lights are green.
If the hoverboard will not turn off, you need to replace the motherboard with a brand new one. The current one is faulty. www.streetsaw.com/products/hoverboard-motherboard-replacement
Hi man, I got the same problem and the hoverboard doesnt work how to fix it please?
My segway has just stop moving and iv put a new battery in .all the lights work and bluetooth makes the right noises. Can anyone tell me how to fix this ? Is the gyroscopes broke
How did you turn it on like that at 0:47?
kcj100 just put an metal screwdriver between two of the three electric sticks inside the plug
Bro any solution why the battery indicator is on orange color and the indicator on charger is green?
Did you find an answer to this question. Mine is doing the same thing
Mine flashes 9 times in correct position and shakes terribly when on it.
My hoverboard red and blue indicator light keeps on blinking I don't understand what's gone wrong. Pl anyone help me to clear my doubt.
What needs to share ? Gyro , motherboard ?
+Joschua Parvez I don't understand your question.
+StreetSaw Hoverboards What must change ? Gyro or Mainboard ?
+Joschua Parvez Nothing needs to change. The blinking light 9 times is simply an indicator that you turned the hoverboard on while it was upside down.
+StreetSaw Hoverboards Ok , when I turn comes , normal , but not balance . What is the problem ?
Thanks for you Answer
+Joschua Parvez Most likely the gyroscope. You can get one here (make sure it matches the same before buying): www.streetsaw.com/products/hoverboard-balance-sensor
How can l fix my haverbord she dont work but th led on and cant walk
i got the same problem how to fix it please?
Same problem being what?
my segway wont to turn off how to fix it??
1 mosfet is ded you need changedd..
how to fix it
Turned out my ground wire came off inside the wheel. I weld it back on and my hooverboard worked without balance it
My hoverboard say The same with The Red blink but wont let me turn off.... Please help
Just the same
What does it mean if the light flashes 2 times and continues an makes noise wirh the flashing?
You would have to show us. Which light? How is the beeping sound? Could be dead battery, or could be bad motherboard.
same problem
mixit2020 Dead battery
It was bleep bleep...bleep bleep so I checked all the wires there was all ok but the light was continueing to flash yeah like crazy an still wouldn't work never seen nothing like it...
batterie was fully charged
Hy,, 1 mosfet is dead you ned to change dem' mosfet first identification after change..good look.
My hover board won't turn on, & beeps when i plug it to the charger, I opened it up & everything seems to be connected, what could i do?
What exactly do you mean it beeps when you plug it into the charger? Is is a UL2272 board or an older board? If it is an older board its most likely about time to buy another one of these: www.streetsaw.com/products/hoverboard-battery-replacement
I believe so... it starts beeping when i plug it up as if i get on it & it does this constantly & the two lights on the board starts turning on & turning back off
solid red battery and solid red circle LEDs light up. new charger (AC ADapter) new motherboard and gyros installed.
please what do you think it is"
Yung Wing tried recalibrating?
Yung Wing did you get a new battery as well?
My hover board is beeping Continuesly and is not working showing two red light on it plc help me out
Same
the red light on my charger flashes. what does it mean
It sounds to me like you need a new charger. Usually when the charger flashes red, its a bad charger. When the charger has solid colors, such as green or red, its usually something electrical, such as the battery.
You can buy our BEST brand new replacement hoverboard charger here, and it comes with a full 100% money back guarantee warranty (guaranteed to fit too): www.streetsaw.com/products/replacement-hoverboard-charger
If you're looking for one on the cheap, we also have this one (we don't generally recommend this one though, and no warranty): www.streetsaw.com/products/cheap-hoverboard-charger
I have the same problem my CHARGER FLASH RED WHEN PLUGGED IN THE HOVERBOARD AND THE WHEEL SHAKES, BUT when not plugged in the Hoverboard the light in the charger stays solid green
I need you help
brand new Chinese Hoverboard won't turn on unless charger is plugged in , why?
brad henry tried recalibrating?
In my case its blinking 12 times please somebody help me
My Hoverboard Blink In 8 Times how to Fix?
Hoverboard works great just the long beep noise motherboard speaker ...
Not sure what you mean?
Hello my friend
I desperately need guidance
The Hoverboard turns off in a rough bump and the accelerator suddenly shuts off
Sockets are sturdy
Do you have an email to send me an electronic circuit photo
thanks for your help
maybe you can help my hoverboard doesnt turn off
Yes, for a hoverboard that doesn't turn off read this article: www.streetsaw.com/pages/hoverboard-wont-turn-off
the beep noise stays on
See my earlier reply.
lol this is insane. sorry, your not allowed to know what's wrong with it until you heave this hunk of meatal above your head.