For anyone thats still having this problem the fuse isn’t always just the case, for my issue it was my side bumper lights and the fuse, pretty much what I had did was electrical taped the broken wires after I had cut/shortened them then I put in a new fuse and my led strips and led rear lights started working again without any problems
My 2006 g35x has a problem with the headlights going out on each side, I checked all the fuses on both fuse boxes and none of them that go for headlights are blown out and when I used a tester it shows power isn’t going through like it’s supposed to. Do you have any idea what it could be? Edit: also both headlights tend to have at least one piece of light missing on each side now, if it’s a light strip or the actual bulb then the other side would be missing the opposite. What could that be, since all lights are able to work but not all at the same time.
what if my turn signal is not working, got into an accident and the wires ripped. then i got the connectors and spliced them but now the problem is i can’t find where to plug in the turn signal wire. i’ve checked everywhere ok youtube
Would you know why the fuse keeps blowing 😅lol I literally bought a pack and had my friend pull out a fuse. I will hit the light switch it’ll blow it put another one in it’ll blow it. I did four of them you have any idea why it’s doing that
@@maartin_vq so I found out what the issue was. I made a video on my TH-cam channel about it. It was literally so LED lights would be the most cause my side markers were LED so I looked at my side markers. My right side marker was corroded ripped the cords apart and my light started working again. The fuse stopped blowing so I found the issue which was that side marker. Now I have to get new ones.
At that point it’s your ballast. More than likely theres some water that got into it. Take it out and let it dry and try it again. If it doesn’t work, just pick some up from the junkyard.
![THE TOYS x NONT TANONT - ดอกไม้ที่รอฝน (spring) [Official MV]](http://i.ytimg.com/vi/pPa1d5cC8M4/mqdefault.jpg)
Súper súper Helpful Bro! Thanks!
For anyone thats still having this problem the fuse isn’t always just the case, for my issue it was my side bumper lights and the fuse, pretty much what I had did was electrical taped the broken wires after I had cut/shortened them then I put in a new fuse and my led strips and led rear lights started working again without any problems
That help me lots bro!!
super helpful!
glad to help!
My 2006 g35x has a problem with the headlights going out on each side, I checked all the fuses on both fuse boxes and none of them that go for headlights are blown out and when I used a tester it shows power isn’t going through like it’s supposed to. Do you have any idea what it could be?
Edit: also both headlights tend to have at least one piece of light missing on each side now, if it’s a light strip or the actual bulb then the other side would be missing the opposite. What could that be, since all lights are able to work but not all at the same time.
Which fuse is that bc my white strip dosent work for both sides on my g37
What did you put on the headlights? 👀
Both of my led strips on them went out n they were brand new too
what did you do
Hey I just got some these headlights but the white part don’t light up on both , and one of the bulb work on one side and the other doesn’t
That happened to my friend once. I think it has something to do with the wiring on the headlights, aside from your ballast.
what if my turn signal is not working, got into an accident and the wires ripped. then i got the connectors and spliced them but now the problem is i can’t find where to plug in the turn signal wire. i’ve checked everywhere ok youtube
I’m having trouble with the headlight itself
I did this twice and and it gives up. What could it be??
Having same issue, white arcs didn’t work but is that another fuse box? The one I found is located next to my E break for my g35 .
Nvm I found it, how did u manage to take the fuse box cover off tho
I think there might’ve been a clip that I just had to press while pulling up. Sorry about the late response
i just replaced my fuse and the white led strip still isn’t turning on.
@@MrShakozYT i’m not sure why then. Let me know if you ever found a solution
@@MrShakozYTyo bro did you find the solution? im having same problem
Those headlights look dope what did you put on them?
Make sure to check all the rest of the fuses not just 1
One of my led strips went out on my headlights what could that be?
could be the wiring mine was cut look in the harness
Would you know why the fuse keeps blowing 😅lol I literally bought a pack and had my friend pull out a fuse. I will hit the light switch it’ll blow it put another one in it’ll blow it. I did four of them you have any idea why it’s doing that
Same problem here lmk if you find out how to fix it
@@maartin_vq so I found out what the issue was. I made a video on my TH-cam channel about it. It was literally so LED lights would be the most cause my side markers were LED so I looked at my side markers. My right side marker was corroded ripped the cords apart and my light started working again. The fuse stopped blowing so I found the issue which was that side marker. Now I have to get new ones.
Could be a fuse still if only one headlight works but other doesnt? I put a new bulb as well and nothinh
At that point it’s your ballast. More than likely theres some water that got into it. Take it out and let it dry and try it again. If it doesn’t work, just pick some up from the junkyard.
@@vvtwanis the white led strip considered as the ballast part??
@@leootapia3219 no, check all the wiring in your headlights. One of them could’ve possibly got cut
cause my led lights went off so idk what fuse that is
First one to the left
I changed my fuse and they still won’t turn on what does this mean?
Was it blown again, mine kept blowing so I got a higher amp fuse
Bro everytime i change it , it blows right away , HELP
Bro same here
Check your side markets