7R VS 10R Moving Head comparison From Shehds Lighting
ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2024
- 10 R info
Power Supply: AC90--275V,50--60HZ
Power consumption: 275W
Lights Source: Bulb
Drive Current:1500mA
Color Temperature: 8000k
Beam Angle: 5-15 Degrees
Color Wheel:14 kind of colors +white(half-color-effect)
Rainbow Wheel：Color rainbow effect with variable speed
Prism1: 8-facet circular prism rotating variable speed
Prism2: 16-facet circular prism rotating variable speed
Dimmer: 0-100% mechanic dimmer
Control Modes:DMX512,Auto Run,Sound Action,Strobe，Stand Alone and Master/Slave,With Rich Advanced Built-in Program
Strobe: Flash rate 0--25HZ
DMX-Control-channels:14/16 DMX Channels
Frost:Soft lights effect
Tilt：270° (16bit)
Pan：540°(16bit）
Dimmer: 0-100% mechanic dimmer
Long Lifespan LEDs(more than 60,000 hours)
Waterproof level: IP20 Indoor
Ambient temperature: -20°C～40°C
Cooling System: Box Heat Conduction
Shell Material: high temperture resistant plastic
Product Color: Black
Product Size: 29x23x50cm
Product Weight: 13.15kg
Package Size: 31X25x52cm
Package Weight: 20kg
#Compassion
#ShehdsLighting
#10RmovingHead
#275watt
#movinghead
Product link
www.shehds.com...
Other Channels to go check out
DJ Fire
/ @djfire2020
New Horizon Lawn Care
/ @newhorizonlawncarelan...
Mom Chat With Jess
/ @momchatwithjess
DJ Mike James
/ @djmikejames
![[DRIP] ‘Woke Up In Tokyo (RUKA & ASA)’ PREVIEW](http://i.ytimg.com/vi/QN44lcR_VkI/mqdefault.jpg)
Nothing compares to a genuine classic Clay Paky Sharpy.
Thanks for reviewing the lights from Shehds!
Your welcome
Very helpful, thank you!! What’s your thoughts on noise from both of these units? I’ve heard the 7r is too loud for certain gigs
7 r is loud and the 10 is is a little quiter
So how are the 10r holding up? Do you still have them?
I had 6 of the shedhs 10R and had some serious issues with them the dimmer shutter randomly closed on 3 of them during a gig after 10 minutes and wouldn't reopen till about 20 minutes, i had these hung on the truss and on 2 of them the brackets came away while the fixtures where in the air but safety bonds saved them from crashing to the floor and the brackets where still in locked position and a few other issues i personally wouldn't trust shedhs products due to these issues but great review, i gone back and using my trusty old trusty ex hire robe 1200ats spots
What road case are you using for the R10's
Thank you
Thanks for the review. I recently purchased the Shehds 275w 10r beam for my outdoor Halloween display. I plan on shining the beam through the air. Do you think this light will be strong enough to be visible through the air?
Are they good ?
Hello can I ask a question? What is the meaning of "r" on 7r or 10r?
The “R” in the designation stands for Reflector-Type OSRAM bulb.
Did you have any issues hooking up the 275w 10R with DMX?
Nope it went as it should
Does it still work
Can you direct me to the website also what totems are you using?
I'm using the Rockville collapsible ones
www.shehds.com/?gclid=CjwKCAiAlfqOBhAeEiwAYi43F2iUlcOtVy8ZYb3rK63cXxNFN5LQI04fcFxzx1GFquzzrx3PrA6mUhoCX5oQAvD_BwE
Thank you
@@reginogomez3513 np
How much for heach
Can you tell me where to find a fixture profile for mydmx software?
I am not sure you would probably have to create your own
Dmxis fixture library has them all just search 230 W beam and you will get tons of results
@@rhettbandy3397 hey Rhett.. do I need any hardware? Is the software free?
Thank in advance
@@carlosgomez6687 yeah you need a dmx interface of some sort, and there are plenty of free softwares but I chose enttec dmxis/ show buddy active and it is great.
@@rhettbandy3397 thanks!! What DMX interface do you use if you don’t mind me asking?
Question!! How do u make ur it to logos?