I like how everyone in the comments is a fucking racing expert. Just let them race ffs. It's not like they were losing either and I'm sure most of it is for fun. Keep it up guys.
Your turning in a little early for the U shaped section, you wanna literally wait till the last second before you point it so you are clinging onto the track edge when you exit using every inch of the track available.
El problema estaba en que empezó a patinar mucho el clucht y creo que el cable del clucht se le estaba soltando por eso hay que utilizar un prisionero para el cable
would love to talk to you more about port work i wana make a case reed ms880 I've been doing a lot of research and I have the tools and parts this case reed 110 I have has A-Rod stamped with 100. How many mm is that stroke
In most cases its probably your bikes carburetor has fouled or it need to be cleaned out. In my case i have a 80cc 2 stroke engine and installed it on a mid adult sized city mountain bike. I would take it out for a spin on track days and then one day it just died out on me by puttering out which is a common symptom of my bike fuel system not working right. Anyway even now i still have the bike giving a pat on the seat and proud putting it together thus do my best to keep it in prime condition.
Zeda Motorsports do you know any mountain bike type frames that would work that arent walmart bikes, i wanna be able to hit jumps without mu frame snapping
@@trentbikes u sound mad stupid, they all have the same 80cc engine with different mods, and these engine don’t have enough power to get going from a stop, do sum research befo tryna be a smartass lookin stupid
Is that the only frames for motorized bikes I only ask because everyone has the same s*** and I'd like to do something fun but not do what everybody else is doing just the same stuff over and over and over again anybody know any other kind of cool frames or anything I'd love to hear I'm an Enthusiast I love these frames don't get me wrong it's just everybody has them so they're just so typical it's basically a Honda Civic to me
Sry lil harsh just mean it seams common for racing n i cant fit any ideas im 6 ft nine i just dont fit these frames that seem to be the best frustrating
Crying for a machine means its beyond of a state of disrepair. If a bike is equipped with a 2 stroke engine and breaks down i would hardly believe it will even come near to that. The reason why that is because the motor that's equipped on these bikes have been designed to create an inexpensive method of transportation.
U guys are the shi* love ur build i need help im 6 foot nine these frames are so small i know there true but i wanna fin alternative if i can ride these.. Ive been doing 29ers n had to work out many kinks but realy looking for something true n better than what im working with zeda or well rob can u help me been a fan n subscriber for while need help 6 ft 9 dont fit the 26 frames even though there bas @$£
The best bike I've found was www.sixthreezero.com/products/itb-black-3sp?variant=412382537 but you will need a laidback seatpost, maybe a banana seat to cover your longer legs. I picked the 3 speed because hub shifters shift much faster than cassettes with derailleurs. You can choose whatever variant you want, I use a 3 speed hub because shift kit.
Zeda Motorsports Aw man that sucks! You where killing it on the track too! When I build my first bike I definitely want to use your products! I definitely support American small businesses with quality products!
He was going pretty slow when he looked down to be fair Lol if you got years of riding motorized bikes under your belt (at least for me) it’s quite easy to reach down and fiddle around or look at what’s happened, but you’re right it’s like rc cars, sometimes you spend more time fixing than racing for sure, you have to love that part of the hobby too or motorized bikes are not for you no offense👍
I ride XR750 HD flat trackers and if you behaved that way on the launch, you'd be elbowed! Racing at all cost (bein a Dick) puts everyone at danger. Wait your givin turn and outpower or outride them. You deserved what ya got.
Great bike, but if you put some serious effort into improving your cornering and braking you'd be doing way better than spending all your time on performance mods.
I always wondered why there was a crowd of these bikes outgrowth of certain public places in Orlando on tue and wendsday night I went into one of the shops asked the owner whats up with all the engine powered bikes he said idk I sell alot of em so I stoped in one of the places with all the bikes to find out it was all AA MEETINGS DONT NEED A LICENSE DRUNK MANS LMAO .CAL. DOWN SPORT ITS NOT LIKE FIDDERELLI OR APRILLA LOOKING TO SPONSER ANYONE ANY TIME SOON I CANT WAIT TO SEE SOMEONE PEDDLE BUY MOTORCYCLE
Wow !! Didn't realize motorized bicycle racing was this big I love it!!
rest in piece to your clutch and the trophy that you were about to win
Love that it has human legs for that low end torque
Btw I appreciate the transparency. It's rare.
Bruce Sabatoni no problem boss!
I like how everyone in the comments is a fucking racing expert. Just let them race ffs. It's not like they were losing either and I'm sure most of it is for fun. Keep it up guys.
Hi. Are you still racing these in St. Louis? How can I guy find info on potentially participating in this race?
That's unfortunate, but something always breaks eventually with these engines.
I race motocross, I know the feeling!!
@@Westhelockpicker if it has tits, it'll cause you ten times the problems, and need twenty times the maintainence of anything with tires.
@@Westhelockpicker Eugene Hughes :D
That monster dominated. Then he fucked it up. Happens the best brother.😲
Yall should be wearing r
Full Race Gear on the track I understand These are motorized bicycle but still fast enough to get hurt
Should not have gotten so greedy with that power and having to use the clutch so much...The Bugs Bunny turtles behind him understood that fact
What were you fiddling with at high speed?
Your turning in a little early for the U shaped section, you wanna literally wait till the last second before you point it so you are clinging onto the track edge when you exit using every inch of the track available.
He did better than everyone else in the race, so settle down Rossi.
@@thenoobletlego he’s just sharing information ya bitcj
Pode ter uma melhora na pilotagem com bons conselhos 🇧🇷
calm down there ricky bobby
You Rock, Zeda . The industry leader in the motorized bike world. Best Cases, cylinders, pipes. Billet made in the United States. HellzYeahBuddy
And we’re they now lol out of biz
Mans pissed his bike broke lmao
Why didn't he fix it I mean he has time lmao 😂
Lmao ! You win some, you lose some !
El problema estaba en que empezó a patinar mucho el clucht y creo que el cable del clucht se le estaba soltando por eso hay que utilizar un prisionero para el cable
Qué mal, después de ir en primer lugar. Más bien tuvo mucha paciencia y buena reacción.
YESSS I WAS THE 500TH LIKE 😎😄 THAT LOOKS SUPER FUN
thats alright you will win the next 5
would love to talk to you more about port work i wana make a case reed ms880 I've been doing a lot of research and I have the tools and parts this case reed 110 I have has A-Rod stamped with 100. How many mm is that stroke
Half the the video is racing. The other half is pouting.
You did a very great job sorry that it dict on you however that was a really great run
Damn speed demon 😂😂😂😂
A equipe do cara é só ele mesmo.
Hang in there, Bro...
In most cases its probably your bikes carburetor has fouled or it need to be cleaned out. In my case i have a 80cc 2 stroke engine and installed it on a mid adult sized city mountain bike. I would take it out for a spin on track days and then one day it just died out on me by puttering out which is a common symptom of my bike fuel system not working right. Anyway even now i still have the bike giving a pat on the seat and proud putting it together thus do my best to keep it in prime condition.
If I'm flagman to start it that guy holding up the grid would have had him some catching up to do about the second time he didn't line up
You had them IT'S OKAY RACE THEM NEXT TIME BIKE ITS NICE RIDE ON
There quick I wonder wat they hit on the straights
Wow thats quick!!
man that thang is a damn monster for real just f'd you burnt the clutch
you are champion for me
Qué fácil de da por vencido este mae que clase de bicimotero mucha aceleración por eso lo trabo
I wanna build one of these bike for on/off roading what frame do you recommend?
James Dell'Aquila fake felt
Zeda Motorsports thanks so much for the response
Zeda Motorsports do you know any mountain bike type frames that would work that arent walmart bikes, i wanna be able to hit jumps without mu frame snapping
Zeda Motorsports also i feel like wheelies on that bike would be extremely hard
I made and off-road one out of a cheap Walmart hyper bike, wish I would have spent the cash and bought something with more gears😂
This bike can knee drag?
Its very nice em Brasil peaples use bike80cc for freestyle
What tyres do you run and where from?
I'm intrested in purchasing this engine what are some things I should be looking out for?
Vibration. And shitty Clutch design and leaky seals. Typical 2 Stroke. If u can soft mount the engine it will help a lot
I wouldn't get the Zeda. They have more issues than the chinese motors
What exhaust? Sounds good
lookd like an MZ65 or a clone
@@fixanypc defo not a clone, a clone is smaller and not as good
@@trentbikes there are mz65 clones, not the ebay trash pipes
@@fixanypc correct, a real mz65 pipe is lile double the size almost.
@@trentbikes there are legit clones of the mz65, im not talking about the banana pipes on ebay
Know when Vietnam is new to racing as your country
yeah boi
2stroke al the way 😂
What are the mods on that thing?
ТЕБЕ НАДО ПОСТАВИТЬ КРБИРАТОР ОТ МОТО КОСЫ😄
Lol, he got hot, lol. Got to relax dude, it's not the end of the world lol.
What motor ? How do you get it to sound like a dirtbike
It sounds like that buy it self you have to have a 125 cc or higher cc
Not really look at 50cc Honda dirt bikes
What is the base bike? I noticed the built in tank
Something that cuts us lowbuckers out of that game
How’d yall start moving on the bike from a complete stop with out it stalling
More powerful engine and using your legs? lmao
@@trentbikes u sound mad stupid, they all have the same 80cc engine with different mods, and these engine don’t have enough power to get going from a stop, do sum research befo tryna be a smartass lookin stupid
Is that the only frames for motorized bikes I only ask because everyone has the same s*** and I'd like to do something fun but not do what everybody else is doing just the same stuff over and over and over again anybody know any other kind of cool frames or anything I'd love to hear I'm an Enthusiast I love these frames don't get me wrong it's just everybody has them so they're just so typical it's basically a Honda Civic to me
Sry lil harsh just mean it seams common for racing n i cant fit any ideas im 6 ft nine i just dont fit these frames that seem to be the best frustrating
You need a gearbox with that motor
??????
what
I agree!!!
@@DirectCurrent4u no...hes not correct
Game Imre but hes just not
Link where to by that folks please
Is Zeda made in China?
For Sure!!!
All Time Productions all the parts are lol
EVERYTHING IS! We no longer produce anything. All we do is but the motors from China, port them, slap a sticker on then say made in America!! 👍😉😂😂
Where can I purchase those awesome handle bars
dont cry
little bitch! likely cant afford a real race bike....
Crying for a machine means its beyond of a state of disrepair. If a bike is equipped with a 2 stroke engine and breaks down i would hardly believe it will even come near to that. The reason why that is because the motor that's equipped on these bikes have been designed to create an inexpensive method of transportation.
Crystal Stanborough is that bad if he can’t afford a race bike
Crystal Stanborough the bikes are just fun to make and modify
U guys are the shi* love ur build i need help im 6 foot nine these frames are so small i know there true but i wanna fin alternative if i can ride these.. Ive been doing 29ers n had to work out many kinks but realy looking for something true n better than what im working with zeda or well rob can u help me been a fan n subscriber for while need help 6 ft 9 dont fit the 26 frames even though there bas @$£
The best bike I've found was www.sixthreezero.com/products/itb-black-3sp?variant=412382537 but you will need a laidback seatpost, maybe a banana seat to cover your longer legs. I picked the 3 speed because hub shifters shift much faster than cassettes with derailleurs. You can choose whatever variant you want, I use a 3 speed hub because shift kit.
@@thefunniestfarm4731 thank you so much
what state is this
St. Louis is in Missouri !!!
Where can i get involved to race. Would love to race can some one guide me in the rite path
Lamont Miller so cal motorized bicycle club
Is pedaling allowed
"motorized bicycle racing"
Where can i get those bars?
You pushed it too hard your are already lap ahead from the slowest guys. It happened to me once in a drag race, i broke the connecting rod.
I think the last half was uploaded by mistake LOL! What happened to the engine?
Bruce Sabatoni burnt the clutch up
Zeda Motorsports Aw man that sucks! You where killing it on the track too! When I build my first bike I definitely want to use your products! I definitely support American small businesses with quality products!
This looks like fun and your bike huals ass 😎
Welp. Shit breaks. Fast shit breaks faster.
That's some truth for yo ass right there
The one handed riding while fidling with the carb is sketchy af. Naw I'm good. Looks like more time fixing than racing.
He was going pretty slow when he looked down to be fair Lol if you got years of riding motorized bikes under your belt (at least for me) it’s quite easy to reach down and fiddle around or look at what’s happened, but you’re right it’s like rc cars, sometimes you spend more time fixing than racing for sure, you have to love that part of the hobby too or motorized bikes are not for you no offense👍
He fried that %*==#@\£!!!!
I ride XR750 HD flat trackers and if you behaved that way on the launch, you'd be elbowed! Racing at all cost (bein a Dick) puts everyone at danger. Wait your givin turn and outpower or outride them. You deserved what ya got.
Should have raced on an oval.
Great bike, but if you put some serious effort into improving your cornering and braking you'd be doing way better than spending all your time on performance mods.
I bet an ex-girlfriend uploaded this to the internet right? LOL
Where'd you get a 92cc moter?
Zeda sells them. Just google it
Mano tá perdendo aceleração na curva. assim que você deitou a bike o ideal é que você já começe a torcer o cabo .🇧🇷🇧🇷
holy shit how u make yours go that fast
Raiel gH0st expansion chamber. high compression head, higher gear ratio
I think they use 21+mm mikuni or clone carbs for these
Bro why did I know you were go throw the bike. I’ve so been there. I kicked my own bike over and left it for who ever wanted it.
No you didn't. Wtf that's a huge loss of money if you did that
Lmao he has what looks to be a copy of vortex clip on sets
I always wondered why there was a crowd of these bikes outgrowth of certain public places in Orlando on tue and wendsday night I went into one of the shops asked the owner whats up with all the engine powered bikes he said idk I sell alot of em so I stoped in one of the places with all the bikes to find out it was all AA MEETINGS DONT NEED A LICENSE
DRUNK MANS LMAO .CAL. DOWN SPORT ITS NOT LIKE FIDDERELLI OR APRILLA LOOKING TO SPONSER ANYONE ANY TIME SOON I CANT WAIT TO SEE SOMEONE PEDDLE BUY
MOTORCYCLE
That bikes motor,makes mine sound pussy
5:28 me
Such a cry baby, I can't believe he posted this. Lmfao!
The irony
That was kind of a dick move at the beginning of the race yeah I guess there’s no respect not even in Motorized bike racing
Dick move to say the least
I would have smoked you in the corners .and yes with those tiny tires
what motor kit u got?
@@matts.996 I have dont ride bicycle anymore .i ride 2017 gsxr 1000r ...
@@matts.996 On the bike engine kit i would do the work myself from a stock engine .bolt on parts and port& polish myself
gixxer L7 508 so your bragging that your full size motorcycle can beat a bicycle, such accomplishments
@@matts.996 Yes. 😜
Haaaaanahahahahahahahaaaaahaha... funny....thoughts of winning. Whomp whooomp
That sucks.
The Kung flu virus your Chineseieum engine?
Where the 4 strokes?!! Begone with the noisy crickets!! Weedeater fest!!🤣🤣🤣
Overheat? Haha to much tune not proper material or practiced in less heat normally..
No, clutch let loose
@@checkoutsmolikperformance223 denggg
Very sadly 🙄
Need more practice to be looser
very improfessional
not like its a professional sport lmfao
boring
Cry baby
michael ludeke STFU
What a bitch
Michelle dodo is a