ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Cool Ideas of Handyman for Overhead TIG Welding Keyhole Techniques
![weld [HAGOJIBI]](http://yt3.ggpht.com/ytc/AIdro_lButtTy6bwshHHOdUuuc7ktsddm0YgRj2FhqoPUm3aQA=s48-c-k-c0x00ffffff-no-rj)
ฝัง
- เผยแพร่เมื่อ 9 ก.ค. 2022
- Hello everyone.
There are several techniques for TIG welding the root of a stainless pipe.
Among them, keyhole welding is one of the best welding methods.
However, the keyhole technique in the overhead position is not easy.
Today's video is about tips & tricks that can be applied in the overhead position.
I hope this information will be a useful idea for those who are learning keyhole welding.
Thanks for watching and have a nice week.
#handyman
#ideas
#Tricks
#Hacks
#Secret
#Tips
#tipsandtricks
#Cool
#useful
#TIG
#welding
#pipe
#Root
#keyhole
#technique
#weaving
#weld
#HAGOJIBI
Whatever the difficulty confronting the worker, HAGOJIBI has the expertise, the technique and the gameplan to perform the task as a complete Master of his Craft. Another flawless performance! Can't begin to tell you how much I value your videos. All respect!
It's look like easy while we see you weld but i know by experience it's very hard and need to practice a lot to have a good result,thank you for the video.
Génial ce soudage avec l'apport par l'intérieur du tuyau.
Vous êtes vraiment trop fort.
Merci
You always make it look like easy boss..
Grande, un asso e una tecnica davvero sopraffina, sei un drago e fonte di ispirazione.
Thank you master, now looking forward to your lay wire technique video! 감사
대단합니다..
저도 공업계 마이스터고 졸업하고 용접 특수용접 기능사 포함 국가기술자격증 9개 가지고 있고 현차계열사 다니고 있지만 용접 잘하시는 분들 매우 존경합니다.
Its always about continues supply of the rod, the angle of the rod and the pipe position.
Buena clase maestro, como siempre, se ve genial y es muy didáctico, gracias por compartir sus conocimientos, un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🔝 🤓 🌞
방장님 샾장에서 5t땡크(써스) 세라믹 백판대고 키홀용접하는데
언라인 뒤죽박죽 갭 두죽박죽합니다 힘드네요 용접원리를 몰라서 그럴까요 정신이 없습니다 암튼 방장님 방송보면서 힘내고 있습니다 감사합니다~~ 사랑합니다
Great job with techniques and tricks to work well 😎👌
오늘도 한수배우고 갑니다
감사합니다
설명 감사합니다 🙏
хотелось бы услышать советы nо сварке конструкционного алюминия 4 мм толщиной. Настройки, nрисадки и т.д. :)
와우
오늘도 좋은 영상 감사합니다^^~
Tutoring sangat jelas dan berpengalaman. Terimakasih atas berbagi ilmu dari anda. 👍
muy buenas técnicas traes, te quería consultar como puedo sumergirme mas en el mundo de la soldadura tig, gracias saludos de argentina!!!!
아주 유용해요 최고입니다
Thank you for this clip, full of new information. Greetings from Al-Gharqa
謝謝！兄弟
Beatiful techinc. .
Very nice job!
Great job 👍🏼
Sos un genio amigo!
Good weld
Great video once again! Good job👨🏭
Отлично🤝
Sim essa parte do tubo fixo dás 6 horas às 7 é sem dúvidas nenhuma a parte mais difícil que tem na raiz se você conseguir a amperagem certa e conduzir o material de adição com uma boa concentração sem pressa irá dominar a gravidade tornando um cordão cheio e escamado entendi sua aula de hoje mestre obrigado 🙏
Для меня была большая проблемма поднять с потолка корень с валиком спасибо
I learned something again. Tomorrow's rehearsals at the workshop. I thank the Master for His time for us.
Overhead can be tricky , any tips and tricks are always welcomed .
好想成为您的徒弟，向您学习焊接技术。
Those pieces tacked on holding the gap are cool but not sure many places in the states would allow it
มิตเตอร์ ไทยแลนด์
👏
But did you purge the inside?
It was taped and plugged 0:07
👌💪🏽🥇🤙
👍👍👍👍
갭이 좁아서 와이어가 관통안된다면 어떤 기법을 추천하시나요?
눌러 때우거나 그라인더로 갭 확보후 용접합니다
@@user-sz5ch4my6b 눌러때우면 빽이 평평하게 나오던데 1~2미리 나오게 하는 팁이있을까요?
Tough position, my root bead always comes out flat when welding overhead position. Any help please?
제 채널에 그내용에 관련된 영상이 몇개 업로드 되어있습니다. 참고하시면 도움이 되실거에요
와 이건 진짜 개꿀팁이다
혼자서 사수없이 조공하면서 점심시간 쉬는 시간 다 반납하면서 다해봤던게 영상에 나오네요
솔직히 조금 억울? 하긴하지만 ㅋㅋㅋㅋ
이제 용접 배우시는 분들이나 조공으로 뛰고 계시는 분들은 진짜 너무 좋은 영상이네요
As always, impressive