How to connect FlySky iA6B to Eachine Wizard X220 Quadcopter (SPracingF3, PPM)
ฝัง
- เผยแพร่เมื่อ 4 ก.ค. 2024
- You can now support RCwithAdam (and gain special perks!) HERE: ko-fi.com/rcwithadam 🤗
Visit my website here: rcwithadam.com/ 💻
Confused about how to connect the Flysky FS-iA6B receiver to your Eachine Wizard X220? In this video, I'll walk you through the entire process! The Wizard X220 (I bought mine in 2017) uses the Seriously Pro Racing F3 (SPracingF3) flight controller (FC), so this guide will also apply to other quadcopters using the same FC. I am using the Flysky i6X transmitter.
FS-iA6B www.banggood.com/custlink/Kvm...
10% off CODE BGBFAFF2019
Seriously Pro Racing F3 flight controller manual: seriouslypro.com/files/SPRacin...
My latest Wizard X220 full setup guide: • *NEW* Wizard X220 Setu...
COMMENT BELOW and tell me if this guide was helpful, if I left anything out, and any questions you have about it!
(also, my apologies for the over-exposure/washed-out look in this vid! I'm still getting used to the settings on my new camera).
Follow on INSTAGRAM @RCwithAdam
-------
MY GEAR
Radio: amzn.to/2osIur0
Quad receiver: amzn.to/2CsvX0C
Plane receiver: amzn.to/2OBIqnj
FILMING GEAR
Main camera amzn.to/2pGZA4L
Mic amzn.to/2OKoCOB
Camera stand amzn.to/2C4I3uX
--------
MANDATORY DISCLAIMER:
I participate in the Amazon Affiliates program, which means that if you click on one of the above Amazon links and purchase a product on Amazon, I will receive a small commission (at no additional cost to you).
This is a great way for you to support this channel, if you'd like to.Thanks for your support and have a great day!
-----------
About this channel: Adam makes FUN and HELPFUL videos about building and flying Radio Controlled aircraft, tech, and DIY projects! - วิทยาศาสตร์และเทคโนโลยี
on the spracing f3 board, you can plug that same connector into the back of the flight controller instead of the front, and then ibus servo connector on the reciever, reconfigure in betaflight for serial communication then ibus, and it will result in lower latency, and 14 channels. all with the exact same hardware :) happy flying!
Thank you so much for the review!:) I am so lost right now!!:(
I just received My Eachine Wizzard 220 HV P.N.P. with that being said I have been practicing on a drone simulator app. I will be reviewing your entire tutorial.
Thanks again..
Great! The sim is such a great way to learn! I don't have the new Wizard X220 HV, but let me know if you have any questions and maybe I can help.
Which app are you using?
my too !! ,
Hi there great vid I am going through this step by step and I have to ask, (as I'm new to this) does that receiver that comes with the transmitter end up being mounted to the quad? You didn't mount it but is that what you would need to do after all that so the receiver stays on the actual quad and flies with it ???
Thanks for the tutorial!
Hi @RCwithAdam , is that a servo connector you're using to connect via PPM? I'm not aware of what wires I should be using between the receiver and FC. Do you know what I should be looking for on Amazon etc?
Love the vids, so so informative and I'm excited to build my first quadcopter :)
Your awesome! I love the intro! Thankyou!!!
Glad I could help!
Hello ! Great vid. I conect oposite voltage baterry to my fs ia6 receiver AND saw smoke... any ideas for the repair
Awesome! Thank you!
Great video thanks for chare ✌️🙏👍👌
thanks 4 the video but I don't have "output mode" on my I6!
How can I get that setting? Which kind of firmware do you have on your transmitter?
Same. But thanks
I have same older Fly sky FS-I6 (without X) and its even more simple.
System>RX Setup>PPM output, (Reciever PPM output) turn it on with UP button, longtap cancel to save it, and here you go.
Reciever-drone connection cable method is same as shown in video.
Hi, thanks for the video, I have this tyro 109 just finished setup, and I've got an issue if you can help please,
I've got the flysky Nirvana nv14 installed with the x8b receiver, binding works fine,
I've set the betaflight configurator to ibus, and can't control the drone, I've connected the receiver plug directly to the flight control, and soldered bridge ibus right side on MATEKF405, can you help please? thank you
Hi! Sorry for the late reply! I'm not familiar with that setup, but if you email me a clear picture of it, I'll do my best to help! RCwithadam "at" gmail "dot" com.
will this transmitter bind to the eachine mini war birds
I have a question. Can I use the fsia6 receiver or do I need to get the fsia6b? Because the 1st one I mentioned does not say ppm on the ch1plug.
Technically, you CAN use the ia6 with PWM protocol, BUT that is the WORST option for a mutirotor. Between the two, I HIGHLY recommend the ia6b. my favorite is the iRangeX Fli14+ or FS-X6B using ibus protocol.
I'm going to buy a Holybro Kakute F7 AIO. Can the receiver connect to it
thank you!
Where can I buy just that plug ? Looking to install this receiver with my custom drone build
The bind plug? I'm not sure, but you can easily improvise your own. All it really does is connect the signal pin to the ground (negative) pin.
Same method with the x220s?
Can you do this with the eachine wizard x220hv
Hey I’m new to fpv and got this receiver with the radio. I had board called a kiss 1, and I’m not sure where I plug the wire in pleaseseee help
Hello this receiver suport F4 v3S flyit controller board ?
Ive just ordered the eachine wizard 220s i have the hubsan h501s and the dji mavic mini but i hope I can get into this
Congrats! I'm working on making some helpful videos for the X220S. Hopefully it will help!
Can u set the ia6 withe the wizard x220
How do we know which wire is a wire that can transmit data and electricity but not just electricity
Thanks bro
You're welcome!
how to conect to Tyro 99 f4 controller
can you do one for the eachine lal3 with the baby turtle thanks
Thank you brother thanks 🙏🏻
Glad it helped!
By the way i have question, what versión of betaflight is compatible for this model F3 controller?
Does anybody already tested the XR602T receiver? I can't find anything about it!
Hello, may I raise a question... I have an opportunity to setup a quad which board is supporting SBUS / PPM / DSMX. I have a Turnigy 9x V2 radio (2011 model) which is good for airplanes but not sure that will suit for quads as it is not supporting s-bus/i-bus. Can I somehow use Turnigy receiver for such type of quads like Eachine Wizzard and so..? Thanks
Hi! You sure can! (I think. I haven't tried with that radio before). A lot of turnigy stuff is the same as FlySky (just rebranded). This video might help th-cam.com/video/Pn8Eo4NS3d8/w-d-xo.html .
@@RCwithAdam1 Thanks for Your feedback. Looks like I have to use a PPM/SBus encoder as my receiver is not supporting that (as it is using the older, AFHDS protocol)
does the receiver stay in the drone or do you just plug it out (9:10)
Hi! Yes, it stays in the drone.
Hey Adam, I'm having an issue with transmitter inputs not showing up in cleanflight. I have re-binded several times, and it does indeed bind just fine. Transmitter menu shows that sticks are working but absolutely nothing happens in cleanflight. Wizard x220, my first real quad, and I can't find any troubleshooting info other than what you explain in this video. Any help/tips would be awesome, thanks
Hi! Assuming you followed all the steps in the video, try using a different version of cleanflight firmware. That seems to fix odd issues often.
@@RCwithAdam1 I'll definitely try that. Thank you for the fast response and the countless videos you posts
So I set my quadcopter up, and everything works fine in the software. When I push the throttle on the transmitter you can see in the software the right channel going up. But the motors don't respond to my transmitter... and they work while I test them with the software. pls help?
Hi! Do you have your arming switch set up?
I did everything in this video. The transmitter connects but the quad doesn’t arm, and in the receiver tab the grids are all white. I set modes like to arm and horizon mode and angle but the receiver still doesn’t talk to the quad.
Having the same problem. I had this problem when i first started and did all my researching and finally fixed it! Got it flying. But my video transmitter broke so i got a new one. And some reason it stopped working. Tried everything. I mean EVERYTHING to try and solve this. About to give up honestly
Fixed it. Switched plugs to the other side of the board
i bought other parts for my drone and wanted to install the receiver now but then i opened the package of my controller and there was no cable to connect it to the flight controller and there is none in the other parts i bought where can i buy this cable i cant find the name of it
And i have the mamba stack i think it has no plug on it
Hi I just got a wizard X220 with a FS-i6 controller and a Flysky ia 6b receiver and I got everything configured on ppm output/input and got it all bound (the red led is on still on the receiver when my drone and my radio are on) yet my drone doesn t respond to the radio and when I go on betaflight in the receiver tab everything is on zero and it doesn t react to my radio too , i ve checked the port tab and it s just the same as yours plus the motors are working perfectly when I test them via usb , can you please help me ?
the screen of the radio controller shows the TX battery and the RX battery and it looks like it s connected to the drone but it looks like there is no receiver ,I think I might have something wrong with the betaflight configuration but I don t know what
Hi, Sam! Congrats on the new quad! So, is the quad responding to your radio at all when it's NOT connected into the USB?
What if i dont have that cable connector in my fc? Do i need to sold it?
Yes, you would need to solder it in place.
Hi, look like you are using PPM, I am wondering how to wire up the ia6b using ibus, thanks!
Good point. Don't know why I didn't include that. I'll have to get back to you on that one!
Hey! I don't have a video on setting up the iA6B with ibus, but Rotor Riot kinda covers that in this video at the 10:03 mark th-cam.com/video/fxvKUklqYzU/w-d-xo.html .
@@RCwithAdam1 Thank you so much for letting me know, now I can use Ibus on iA6B
@@jiayuyang6725 You got it! ALSO, you will need to go into betaflight and set the RX settings to ibus.
@@RCwithAdam1 Yeah, I actually make it work now, I am also using the Mamba 30A stack, so I connect it to Rx3 port instead of Rx1, in case you are going to work on yours.
can you bind this to a jumper t16?
I haven't tried, but I'm pretty sure.
where does the receiver fits actually
Drone X pro . Need help formatting sem card my gr.
Got me . See whats on it
Its in my a11.
can you set osd rssi on that?
Hi! On the SPracingf3? Nope.
Is it okay if i dont use a laptop cause i really dont have a laptop
Do you have a smart phone? You can use the speedybee app to set up betaflight.
Works for x220s as well right?
Hi! I think so. But I don't have one to test for sure.
Do you have to keep that receiver on their?
Hi! Yes, the receiver stays connected to the flight controller at all times.
yes, banggood sales a flysky compatible mini reveiver=really small !!! good for tight places ($15)
@@RCwithAdam1 why didnt you just finish the build lol . leave reicer inside! & you get alot more thumbs up than downs.. if you sing more that song.. a whole new World! :>)
can i use it for Octocopter?
Yea u should be able to
Would this work with tyro99 as well?
It should work just fine!
Flysky i6 does not have output mode options.
2:21 where can I buy that cable
This looks like the right one www.amainhobbies.com/msheli-brain-ikon-governor-cable-90mm-msh51605/p511321 .
Hi there, I have a problem with mine wizzard, i've done everything, but i have no connection between my quad and controler. I've checked everything, tryed all the guides, but still does not work, cant turn motors on. I hope u can help with that.
Hi! Which transmitter and receiver are you using? Are you using betaflight? Is the quad showing up in BF at all?
@@RCwithAdam1 flysky fs-i6 with receiver together, i can see that on betaflight can see my quad, but when i am trying to use controler, everything is on 0
@@RCwithAdam1 Controller is a basic version, not X one
@@noluckplay1430 does your receiver or flight controller blink or anything to show that it is receiving a signal from the transmitter?
@@RCwithAdam1 i can see on my controller that quad is connected and also on the betaflight i can do colibration to my quad. Also i tryed to turn the motors with betaflight, it was working, but with controller nothing.
I dont have "output mode" on my controller
If it is a Fs i6 change to AFHDS 2a then to PPM in the rx setup.
how to connect IA6B receiver to mamba basic f405?
Hey! This video might help th-cam.com/video/vZuWzJzNFHE/w-d-xo.html .
@@RCwithAdam1 thanks bro.
I am new subscriber👍
Wait....does the receiver then mount to the quad? Where??? It seems to big..
It is pretty big, and it's not ideal for a quad. But It could go on the top, or be crammed inside. I would use zipties or doubesided foam tape or electrical tape to secure it.
@@RCwithAdam1 perfect thank you❤
Why selecting PPM RX on betaflight not serial based receiver?
Hi! It's because in this vid I'm showing how to set up using PPM only, rather than ibus, and all the rx settings need to match up with PPM.
Betaflight don’t support spracinf3 unless u get the old old version of it .
Okay I think I completely f*cked up i have a nazgul 5 and a fs-ia6b receiver and i can't seam to connect them i connected the controller to the receiver but idk what i need to have and do to bind with the drone
ASTOUNDING!
I wish you had actually shown how to bind the FS-iA6B to the controller instead of describing it. I feel you jumped over the very thing I needed to see.
Hi! 1. connect bind plug to rx.
2. power on rx (connect battery) (rx should blink)
3. with your tx on the model profile you want to use, and the OUTPUT MODE set to match that of the rx, hold down the "bind" button while switching on the power (the switches need to be in the up position and throttle down).
4. tx should beep and probably show the rx and voltage on the screen.
5. binding complete
I’m new to this so that might explain why this is flying over my head but when the title of the video is “how to …” one would think that Adam, in this case, would actually SHOW US HOW TO…. instead of just saying, “ok, next you’re gonna want to bind the receiver to the radio…. then next you’re gonna want to…” while standing there talking and looking at his notes. I’m not “gonna want to…” I “already do want to”… but I’m trying to figure out how to. Is there anybody who shows you? He might as well be just doing a audio pod cast!
Hi! The beginning was a quick overview for people who are already familiar with Betaflight. at 00:59 I begin the tutorial where I walk through the whole process. And just for clarification, I say "gonna want to" partially because that is my style of speaking, and also because it is a more casual and engaging way of saying "this is next and most optimal step in this process." Let me know if this helps!
Don't use PPM. This receiver has IBUS output. Use that, and connect to UART2 of the FC.
damn, stopped at the first step, my drone or controller didnt come with that connector -_-
i will say i see why theres a lot of drones that were never setup in my area, its not an easy hobby to just jump right into
You are right about that!
My Drone is doing nothing, but it's Connected to my Controller
Hi! What kind/model of drone is it?
@@RCwithAdam1 it's a self buildet one, so idk. And it's flashing all the time
why have stupidy and use ppm, becuse if you transmitter support i-bus better use i-bus because have latency lot fasten, i.bus have about 4 usec and old slowly ppm have 20-24usec wey slow. dont ewer use ppm if transmitter and recei9ver subbort i-bus. why use rock axe at pre history if can use chain saw today