What resistance should these read. I just replaced mine in December and now it's not actuating. Usually right after it senses you can her it doing its job down there and shifting the motor into position. Now that doesn't happen. It will agitate intermittently just for a few seconds and that's it . My book says it should read between 2000k and like 3.5k but it's reading like 1980 right now
Will a shift actuator arm move freely when out of unit? Does it have to be plugged in with power to move? I ask bc this is what we believe to be wrong with our washer. I took the old one out and the arm is frozen, does not move at all. I haven't found video yet that describes the problem we were having. The code I received was F7E1. Our agitator would pulse high speed like a blender and wad the clothes up....it would never agitate correctly, nor would it spin out.
Love your video...just real world...dropping the darn screw...fiddling with getting phillips head into bolt head...hehe...same maddening things that happen to all of us it seems regardless of the thousands of times we have done it...
what are the symptoms of a non working acutator. i ran diag and its giving me a f7e5 code. the washer im working on has been sitting for years in storage.
@@DCApplianceRepair I cannot get it to do anything at this point. I can hear a click but sounds to me like the lid locking. I did get it to fill water in test mode but that's all the further it would go. It puts water in and pumps it out in that mode but it necer agitatates or spins
Hello I changed the actuator on my washer and now it won’t fill with water 💦 I tried resetting but it’s not helping any idea if im missing something???? Help TIA
![🔴 ฟุตบอลแชมป์กีฬา 7HD แชมเปียน คัพ 2024 [รอบ 8 ทีมสุดท้าย] - ช่วงบ่าย](http://i.ytimg.com/vi/M0S_ReCIkxg/mqdefault.jpg)
Your videos are getting better and better!!
Thank you sir! I appreciate it. I got a few devices now that help etc.
Thanks again for great content!
Yessir thank you! Good to hear from you hope all is well!
THANK you for a great video it was very helpful
You are welcome
What resistance should these read. I just replaced mine in December and now it's not actuating. Usually right after it senses you can her it doing its job down there and shifting the motor into position. Now that doesn't happen. It will agitate intermittently just for a few seconds and that's it . My book says it should read between 2000k and like 3.5k but it's reading like 1980 right now
Will a shift actuator arm move freely when out of unit? Does it have to be plugged in with power to move? I ask bc this is what we believe to be wrong with our washer. I took the old one out and the arm is frozen, does not move at all. I haven't found video yet that describes the problem we were having. The code I received was F7E1. Our agitator would pulse high speed like a blender and wad the clothes up....it would never agitate correctly, nor would it spin out.
Any load noise coming from the unit? Your error code points to the shift actuator.
Love your video...just real world...dropping the darn screw...fiddling with getting phillips head into bolt head...hehe...same maddening things that happen to all of us it seems regardless of the thousands of times we have done it...
I have a problem with that same actuator the arm that joints them together broke off any idea why it broke off
How will i know if the actuator lever is not broken and functioning properly?
what are the symptoms of a non working acutator. i ran diag and its giving me a f7e5 code. the washer im working on has been sitting for years in storage.
Not going into spin mode.
You need to hear a strong click sound before it goes into spin mode. No click or no spin when running the test, then most likely bad.
would a faulty lid lock mechinism do this as well? thank you.@@DCApplianceRepair
You should hear it click first before anything.
@@DCApplianceRepair I cannot get it to do anything at this point. I can hear a click but sounds to me like the lid locking. I did get it to fill water in test mode but that's all the further it would go. It puts water in and pumps it out in that mode but it necer agitatates or spins
Hello I changed the actuator on my washer and now it won’t fill with water 💦 I tried resetting but it’s not helping any idea if im missing something???? Help TIA
Try by recalibrating the machine. You can put it in calibration mode. The tech sheet is located on the inside wall. The front part of the machine.
Do you have a video with the calibration mode?
Keep it up
Do you have to enter a code when you change shift actuator for the washer to recognize it ?
You have to put it in a calibration mode.
👍👍👍👍👍