Hi there i have my lathe converted (smart& brown) and my bridgeport mill converted in a similar fashion as yours and they work a treat. Thanks for an excellent video on the subject.
@@roybertalotto6355 Hi Roy i should have mentioned i have my drill press running via a cross over switch from the bridgeport mill controller it works a treat well i thought i cant opperate the mill and drill at the same time so why not use the same inverter as the mill. cheers roger musgrove.
@@tedvolz9674 sorry, Im not aware of any all inclusive videos. It is basically three steps. Firstvyou need a 230v circuit, second the wireing of the 3 phase motor and third the mechanical mounting of the motor. All three phases can be found individually on youtube. Good Luck
![[DRIP] ‘Really Like You’ PREVIEW](http://i.ytimg.com/vi/6KYxQ-Udrj0/mqdefault.jpg)
Would love to see a shop tour!!! Thanks!!
Stop by anytime you are in the Cape Cod area!
Hi there i have my lathe converted (smart& brown) and my bridgeport mill converted in a similar fashion as yours and they work a treat. Thanks for an excellent video on the subject.
Easily one of the best modifications Ive made. Now Im going to convert my drill press!
@@roybertalotto6355 Hi Roy i should have mentioned i have my drill press running via a cross over switch from the bridgeport mill controller it works a treat well i thought i cant opperate the mill and drill at the same time so why not use the same inverter as the mill. cheers roger musgrove.
I'm going to be converting my 12x36 too. Is there any vids or diagrams you could point me to on how to do the electrical wiring?
@@tedvolz9674 sorry, Im not aware of any all inclusive videos. It is basically three steps. Firstvyou need a 230v circuit, second the wireing of the 3 phase motor and third the mechanical mounting of the motor. All three phases can be found individually on youtube. Good Luck