Daikin | How to rectify(error code UO)
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- this video to show you how to solve error code
UO.
the coil motorized valve faulty.
in this video i will show you the good and
faulty coil reading.
thanks for watching my video.
please like,share and subscribe.
#Daikin #VRV3 #VRV #VRV4
Hello sir, now i am now one of your subscriber. This is Romero Multifar. Thanks a lot for your videos.. 👍🙏
Thanks bro 🙏🙏
You are doing really a great job 👏 👏👏
Appreciated.
Thanks bro.
Du machst eine Super Job
Immer weiter mit dem Videos
Thanks teacher love from india
Thanks
All your video use full ...Thanks sir
Thanks
you are doing gr8 ..keep it up good work always congratulation to your future
Thanks my friend
@@BonMj kabayan ? salamat po
You are very good and professional
Thanks
Good work & good information sir
Thanks bro
good job sir, thanks for the knowledge.
Thanks
You are great sir
Thanks
Thanks for the info my Lord...
Thanks
Thanks for the information!!!
Thanks
Well done, but what is the use of that valve..thanks for sharing🔄👨🔧
To control refrigerant volume.
Sir this complaint how Daikin U0-04 error occurred
Tq bon mj
Welcome bro
dear sir, I had this error code U0 also but the technician who came suggested a system reprocess. Is this a standard way of addressing and investigating the cause of low refrigerant volume?
How is the pressure.
Standing pressure?
Running pressure?
@@BonMj Thank you for your quick response. I really do not know as I am the client. I was not comfortable with the technician's approach so I asked. Without checking, technician was quick to suggest it, a costly one at that to help him diagnose. When is a system reprocess done actually?
@@BonMj Yes I just remembered it was 80psi and he charged it with additional refrigerant up to 120psi
@@jinshen55 may insufficient gas
@@BonMj thank you for your help. You are generous. Even after adding refrigerant, the aircon stopped working after about an hour with blinking green lights. A reset makes it work again but stops again after an hour or so. Error code is still U0 so am wondering because refrigerant has already been added
Good information Sir
Thanks
I didn't see a nitro tank. Were you purging the system with Nitro when brazing to prevent corrosion inside the braze?
mate your old school its shocking people dont purge OFN when brazing
@@Darny1able I worked 6 years for Daikin and now with Mitsubishi. They both still require purge. Do shit right or do it your way.
Bon good morning, good explanation. Mr last video I requested to you LC error code advise please
How is the job.LC...done?
Thanks for sharing video
Thanks
I need a suggestion from you about this U0 error sir , last time I'm checking the gas at the time of compressor start up suddenly goes down below 30 psi , I found that was body coil valve faulty .
Now I'm changed the total set of motorized body coil valve and outdoor thermistor also . Now the cooling coming below 12°c but the system suddenly cut off after taking 7 or 8 A in outdoor
This is Daikin RZR50LVVM.
Suggest u check the high pressure sensor
High pressure sensor also have a continuity
老师,请问single split的expansion coil怎样量?有六条wire的
我check先再让你知道
@@BonMj ok
NYC sir
Thanks you sir
This is video very easily understanding sir thanks you for sharing.pls u share more videos sir thanks
Mr Bon, my daikin error code is U0 and after top up R410 4 days later not cold and now i think leaked, should i do a pressure test using nitrogen or maybe just change the EEV and then top up?
If you confirm is leak,must do pressure test
Very nice
Thanks
Hello sir ... I set tem 16 error code come U0... But I set tem 22 ac run normal ... Please help how to check expansion valve faulty..
How to check expansion valve faulty
Follow the video,measure the LEV coil reading
How can I check the high pressure sensor
Follow the video ,measure the coil reading
老师,前几天我检查一个外机3mks 71也是U0 内机 3个fcu都闪灯! Gas pressure is Ok .3 个 valve Ohm reading 也是Ok . 难道是Valve body 坏了?很奇怪为甚3个同时坏?reset 一下可以走机!大概2到3天后又blinking 😂
有可能是电路板坏
Sorry,建议你先检查outdoor thermistor reading
@@BonMj(⊙o⊙)!!
@@BonMj 谢谢,我注意一下
@@janshaw5472 Have you solved your problem? Same observation in my ac unit. Gas pressure ok, outdoor thermistor ok. But stopped working, blinking lights. Reset and it works again then stop
Boss
System 1 to 1 daikin inverter
u0 error code
all 55 ohm is normal operation?
Gas is 0 thankyou
Red colour wire to other wire.
The reading normally is around 47ohm.
55ohm should be ok.
Suspect insufficient gas or valve body unable to open.
@@BonMj Thankyou
Is not gasleaking? Gas meter showing
o psi I top-up gas after running is cooling
Thanks
Thanks
Thanks sir❤️
Hello sir I want to works with you I
Daikin split ac RKT model U0 error wts the problem sir
Check pressure,check LEC
This is main electronic expansion valve?
Yes.this is single split
🎉
Thanks
👏
Thanks
Nice
Thanks
Welcome Sir
This is not fair
I was wondering where are you from?
Hi..bro
From Singapore
@@BonMj do you work only on daikin
@@richise30 we are also familiar of Mitsubishi and Panasonic +Sanyo VRF
@@BonMj do you have Instagram
@@richise30 bon.mj.5
If valve faulty how to test
Not cold
Check error
Check pressure
Measure LEV coil reading
@@BonMj if expansion coil faulty also expansion valve?
daikin, name is coil motorized valve. (Is coil only)
If corroded badly ,you need to replace valve +coil motorize valve.
Hello sir, first you pump up the system or recover the refrigerant if you pump up please make a video of how to pump up in split ductable and vrv system, I know how to pump down the system, I want to watch how to pump up the refrigerant. Thanks.
the sound is not good I am quite disappointed
Aircon related Any WhatsApp group create sir...
No
Ye galat hai